A Compact, High Resolution Hyperspectral Imager for Remote Sensing of Soil Moisture

Measurement of soil moisture content is a key challenge across a variety of fields, ranging from civil engineering through to defence and agriculture. While dedicated satellite platforms like SMAP and SMOS provide high spatial coverage, their low spatial resolution limits their application to larger regional studies. The advent of compact, high lift capacity UAVs has enabled small scale surveys of specific farmland cites. This thesis presents work on the development of a compact, high spatial and spectral resolution hyperspectral imager, designed for remote measurement of soil moisture content. The optical design of the system incorporates a bespoke freeform blazed diffraction grating, providing higher optical performance at a similar aperture to conventional Offner-Chrisp designs. The key challenges of UAV-borne hyperspectral imaging relate to using only solar illumination, with both intermittent cloud cover and atmospheric water absorption creating challenges in obtaining accurate reflectance measurements. A hardware based calibration channel for mitigating cloud cover effects is introduced, along with a comparison of methods for recovering soil moisture content from reflectance data under varying illumination conditions. The data processing pipeline required to process the raw pushbroom data into georectified images is also discussed. Finally, preliminary work on applying soil moisture techniques to leaf imaging are presented

Hyperspectral Imaging from Ground Based Mobile Platforms and Applications in Precision Agriculture

This thesis focuses on the use of line scanning hyperspectral sensors on mobile ground based platforms and applying them to agricultural applications. First this work deals with the geometric and radiometric calibration and correction of acquired hyperspectral data. When operating at low altitudes, changing lighting conditions are common and inevitable, complicating the retrieval of a surface's reflectance, which is solely a function of its physical structure and chemical composition. Therefore, this thesis contributes the evaluation of an approach to compensate for changes in illumination and obtain reflectance that is less labour intensive than traditional empirical methods. Convenient field protocols are produced that only require a representative set of illumination and reflectance spectral samples. In addition, a method for determining a line scanning camera's rigid 6 degree of freedom (DOF) offset and uncertainty with respect to a navigation system is developed, enabling accurate georegistration and sensor fusion. The thesis then applies the data captured from the platform to two different agricultural applications. The first is a self-supervised weed detection framework that allows training of a per-pixel classifier using hyperspectral data without manual labelling. The experiments support the effectiveness of the framework, rivalling classifiers trained on hand labelled training data. Then the thesis demonstrates the mapping of mango maturity using hyperspectral data on an orchard wide scale using efficient image scanning techniques, which is a world first result. A novel classification, regression and mapping pipeline is proposed to generate per tree mango maturity averages. The results confirm that maturity prediction in mango orchards is possible in natural daylight using a hyperspectral camera, despite complex micro-illumination-climates under the canopy

A Novel Remote Visual Inspection System for Bridge Predictive Maintenance

Predictive maintenance on infrastructures is currently a hot topic. Its importance is proportional to the damages resulting from the collapse of the infrastructure. Bridges, dams and tunnels are placed on top on the scale of severity of potential damages due to the fact that they can cause loss of lives. Traditional inspection methods are not objective, tied to the inspector’s experience and require human presence on site. To overpass the limits of the current technologies and methods, the authors of this paper developed a unique new concept: a remote visual inspection system to perform predictive maintenance on infrastructures such as bridges. This is based on the fusion between advanced robotic technologies and the Automated Visual Inspection that guarantees objective results, high-level of safety and low processing time of the results

Hyperspectral Imaging for Fine to Medium Scale Applications in Environmental Sciences

The aim of the Special Issue “Hyperspectral Imaging for Fine to Medium Scale Applications in Environmental Sciences” was to present a selection of innovative studies using hyperspectral imaging (HSI) in different thematic fields. This intention reflects the technical developments in the last three decades, which have brought the capacity of HSI to provide spectrally, spatially and temporally detailed data, favoured by e.g., hyperspectral snapshot technologies, miniaturized hyperspectral sensors and hyperspectral microscopy imaging. The present book comprises a suite of papers in various fields of environmental sciences—geology/mineral exploration, digital soil mapping, mapping and characterization of vegetation, and sensing of water bodies (including under-ice and underwater applications). In addition, there are two rather methodically/technically-oriented contributions dealing with the optimized processing of UAV data and on the design and test of a multi-channel optical receiver for ground-based applications. All in all, this compilation documents that HSI is a multi-faceted research topic and will remain so in the future

Reconstruction from Spatio-Spectrally Coded Multispectral Light Fields

In dieser Arbeit werden spektral kodierte multispektrale Lichtfelder untersucht, wie sie von einer Lichtfeldkamera mit einem spektral kodierten Mikrolinsenarray aufgenommen werden. Für die Rekonstruktion der kodierten Lichtfelder werden zwei Methoden entwickelt, eine basierend auf den Prinzipien des Compressed Sensing sowie eine Deep Learning Methode. Anhand neuartiger synthetischer und realer Datensätze werden die vorgeschlagenen Rekonstruktionsansätze im Detail evaluiert

Reconstruction from Spatio-Spectrally Coded Multispectral Light Fields

In this work, spatio-spectrally coded multispectral light fields, as taken by a light field camera with a spectrally coded microlens array, are investigated. For the reconstruction of the coded light fields, two methods, one based on the principles of compressed sensing and one deep learning approach, are developed. Using novel synthetic as well as a real-world datasets, the proposed reconstruction approaches are evaluated in detail

Reconstruction from Spatio-Spectrally Coded Multispectral Light Fields

In dieser Arbeit werden spektral codierte multispektrale Lichtfelder, wie sie von einer Lichtfeldkamera mit einem spektral codierten Mikrolinsenarray aufgenommen werden, untersucht. Für die Rekonstruktion der codierten Lichtfelder werden zwei Methoden entwickelt und im Detail ausgewertet. Zunächst wird eine vollständige Rekonstruktion des spektralen Lichtfelds entwickelt, die auf den Prinzipien des Compressed Sensing basiert. Um die spektralen Lichtfelder spärlich darzustellen, werden 5D-DCT-Basen sowie ein Ansatz zum Lernen eines Dictionary untersucht. Der konventionelle vektorisierte Dictionary-Lernansatz wird auf eine tensorielle Notation verallgemeinert, um das Lichtfeld-Dictionary tensoriell zu faktorisieren. Aufgrund der reduzierten Anzahl von zu lernenden Parametern ermöglicht dieser Ansatz größere effektive Atomgrößen. Zweitens wird eine auf Deep Learning basierende Rekonstruktion der spektralen Zentralansicht und der zugehörigen Disparitätskarte aus dem codierten Lichtfeld entwickelt. Dabei wird die gewünschte Information direkt aus den codierten Messungen geschätzt. Es werden verschiedene Strategien des entsprechenden Multi-Task-Trainings verglichen. Um die Qualität der Rekonstruktion weiter zu verbessern, wird eine neuartige Methode zur Einbeziehung von Hilfslossfunktionen auf der Grundlage ihrer jeweiligen normalisierten Gradientenähnlichkeit entwickelt und gezeigt, dass sie bisherige adaptive Methoden übertrifft. Um die verschiedenen Rekonstruktionsansätze zu trainieren und zu bewerten, werden zwei Datensätze erstellt. Zunächst wird ein großer synthetischer spektraler Lichtfelddatensatz mit verfügbarer Disparität Ground Truth unter Verwendung eines Raytracers erstellt. Dieser Datensatz, der etwa 100k spektrale Lichtfelder mit dazugehöriger Disparität enthält, wird in einen Trainings-, Validierungs- und Testdatensatz aufgeteilt. Um die Qualität weiter zu bewerten, werden sieben handgefertigte Szenen, so genannte Datensatz-Challenges, erstellt. Schließlich wird ein realer spektraler Lichtfelddatensatz mit einer speziell angefertigten spektralen Lichtfeldreferenzkamera aufgenommen. Die radiometrische und geometrische Kalibrierung der Kamera wird im Detail besprochen. Anhand der neuen Datensätze werden die vorgeschlagenen Rekonstruktionsansätze im Detail bewertet. Es werden verschiedene Codierungsmasken untersucht -- zufällige, reguläre, sowie Ende-zu-Ende optimierte Codierungsmasken, die mit einer neuartigen differenzierbaren fraktalen Generierung erzeugt werden. Darüber hinaus werden weitere Untersuchungen durchgeführt, zum Beispiel bezüglich der Abhängigkeit von Rauschen, der Winkelauflösung oder Tiefe. Insgesamt sind die Ergebnisse überzeugend und zeigen eine hohe Rekonstruktionsqualität. Die Deep-Learning-basierte Rekonstruktion, insbesondere wenn sie mit adaptiven Multitasking- und Hilfslossstrategien trainiert wird, übertrifft die Compressed-Sensing-basierte Rekonstruktion mit anschließender Disparitätsschätzung nach dem Stand der Technik

Robotic Harvesting of Fruiting Vegetables: A Simulation Approach in V-REP, ROS and MATLAB

In modern agriculture, there is a high demand to move from tedious manual harvesting to a continuously automated operation. This chapter reports on designing a simulation and control platform in V-REP, ROS, and MATLAB for experimenting with sensors and manipulators in robotic harvesting of sweet pepper. The objective was to provide a completely simulated environment for improvement of visual servoing task through easy testing and debugging of control algorithms with zero damage risk to the real robot and to the actual equipment. A simulated workspace, including an exact replica of different robot manipulators, sensing mechanisms, and sweet pepper plant, and fruit system was created in V-REP. Image moment method visual servoing with eye-in-hand configuration was implemented in MATLAB, and was tested on four robotic platforms including Fanuc LR Mate 200iD, NOVABOT, multiple linear actuators, and multiple SCARA arms. Data from simulation experiments were used as inputs of the control algorithm in MATLAB, whose outputs were sent back to the simulated workspace and to the actual robots. ROS was used for exchanging data between the simulated environment and the real workspace via its publish-and-subscribe architecture. Results provided a framework for experimenting with different sensing and acting scenarios, and verified the performance functionality of the simulator