Modeling and Analysis of Noise and Interconnects for On-Chip Communication Link Design

This thesis considers modeling and analysis of noise and interconnects in onchip communication. Besides transistor count and speed, the capabilities of a modern design are often limited by on-chip communication links. These links typically consist of multiple interconnects that run parallel to each other for long distances between functional or memory blocks. Due to the scaling of technology, the interconnects have considerable electrical parasitics that affect their performance, power dissipation and signal integrity. Furthermore, because of electromagnetic coupling, the interconnects in the link need to be considered as an interacting group instead of as isolated signal paths. There is a need for accurate and computationally effective models in the early stages of the chip design process to assess or optimize issues affecting these interconnects. For this purpose, a set of analytical models is developed for on-chip data links in this thesis. First, a model is proposed for modeling crosstalk and intersymbol interference. The model takes into account the effects of inductance, initial states and bit sequences. Intersymbol interference is shown to affect crosstalk voltage and propagation delay depending on bus throughput and the amount of inductance. Next, a model is proposed for the switching current of a coupled bus. The model is combined with an existing model to evaluate power supply noise. The model is then applied to reduce both functional crosstalk and power supply noise caused by a bus as a trade-off with time. The proposed reduction method is shown to be effective in reducing long-range crosstalk noise. The effects of process variation on encoded signaling are then modeled. In encoded signaling, the input signals to a bus are encoded using additional signaling circuitry. The proposed model includes variation in both the signaling circuitry and in the wires to calculate the total delay variation of a bus. The model is applied to study level-encoded dual-rail and 1-of-4 signaling. In addition to regular voltage-mode and encoded voltage-mode signaling, current-mode signaling is a promising technique for global communication. A model for energy dissipation in RLC current-mode signaling is proposed in the thesis. The energy is derived separately for the driver, wire and receiver termination.Siirretty Doriast

Low Power Processor Architectures and Contemporary Techniques for Power Optimization – A Review

The technological evolution has increased the number of transistors for a given die area significantly and increased the switching speed from few MHz to GHz range. Such inversely proportional decline in size and boost in performance consequently demands shrinking of supply voltage and effective power dissipation in chips with millions of transistors. This has triggered substantial amount of research in power reduction techniques into almost every aspect of the chip and particularly the processor cores contained in the chip. This paper presents an overview of techniques for achieving the power efficiency mainly at the processor core level but also visits related domains such as buses and memories. There are various processor parameters and features such as supply voltage, clock frequency, cache and pipelining which can be optimized to reduce the power consumption of the processor. This paper discusses various ways in which these parameters can be optimized. Also, emerging power efficient processor architectures are overviewed and research activities are discussed which should help reader identify how these factors in a processor contribute to power consumption. Some of these concepts have been already established whereas others are still active research areas. © 2009 ACADEMY PUBLISHER

Optimal Memoryless Encoding for Low Power Off-Chip Data Buses

Off-chip buses account for a significant portion of the total system power consumed in embedded systems. Bus encoding schemes have been proposed to minimize power dissipation, but none has been demonstrated to be optimal with respect to any measure. In this paper, we give the first provably optimal and explicit (polynomial-time constructible) families of memoryless codes for minimizing bit transitions in off-chip buses. Our results imply that having access to a clock does not make a memoryless encoding scheme that minimizes bit transitions more powerful.Comment: Proceedings of the 2006 IEEE/ACM international Conference on Computer-Aided Design (San Jose, California, November 05 - 09, 2006). ICCAD '06. ACM, New York, NY, 369-37

Communications techniques and equipment: A compilation

This Compilation is devoted to equipment and techniques in the field of communications. It contains three sections. One section is on telemetry, including articles on radar and antennas. The second section describes techniques and equipment for coding and handling data. The third and final section includes descriptions of amplifiers, receivers, and other communications subsystems

Millimeter wave experiment for ATS-F

A detailed description of spaceborne equipment is provided. The equipment consists of two transmitters radiating signals at 20 and 30 GHz from either U.S. coverage horn antennas or a narrow beam parabolic antenna. Three modes of operation are provided: a continuous wave mode, a multitone mode in which nine spectral lines having 180 MHz separation and spaced symmetrically about each carrier, and a communications mode in which communications signals from the main spacecraft transponder are modulated on the two carriers. Detailed performance attained in the flight/prototype model of the equipment is presented both under laboratory conditions and under environmental extremes. Provisions made for ensuring reliability in space operation are described. Also described the bench test equipment developed for use with the experiment, and a summary of the new technology is included

STATISTICAL MACHINE LEARNING BASED MODELING FRAMEWORK FOR DESIGN SPACE EXPLORATION AND RUN-TIME CROSS-STACK ENERGY OPTIMIZATION FOR MANY-CORE PROCESSORS

The complexity of many-core processors continues to grow as a larger number of heterogeneous cores are integrated on a single chip. Such systems-on-chip contains computing structures ranging from complex out-of-order cores, simple in-order cores, digital signal processors (DSPs), graphic processing units (GPUs), application specific processors, hardware accelerators, I/O subsystems, network-on-chip interconnects, and large caches arranged in complex hierarchies. While the industry focus is on putting higher number of cores on a single chip, the key challenge is to optimally architect these many-core processors such that performance, energy and area constraints are satisfied. The traditional approach to processor design through extensive cycle accurate simulations are ill-suited for designing many-core processors due to the large microarchitecture design space that must be explored. Additionally it is hard to optimize such complex processors and the applications that run on them statically at design time such that performance and energy constraints are met under dynamically changing operating conditions. The dissertation establishes statistical machine learning based modeling framework that enables the efficient design and operation of many-core processors that meets performance, energy and area constraints. We apply the proposed framework to rapidly design the microarchitecture of a many-core processor for multimedia, computer graphics rendering, finance, and data mining applications derived from the Parsec benchmark. We further demonstrate the application of the framework in the joint run-time adaptation of both the application and microarchitecture such that energy availability constraints are met

The 30/20 GHz flight experiment system, phase 2. Volume 2: Experiment system description

A detailed technical description of the 30/20 GHz flight experiment system is presented. The overall communication system is described with performance analyses, communication operations, and experiment plans. Hardware descriptions of the payload are given with the tradeoff studies that led to the final design. The spacecraft bus which carries the payload is discussed and its interface with the launch vehicle system is described. Finally, the hardwares and the operations of the terrestrial segment are presented