Acid-base strengths in 1,2-dichloroethane

The pKa value of hydriodic acid in 1,2-dichloroethane was determined from conductivity measurements. A glass electrode was calibrated for dichloroethane in the potentiometric titration of hydriodic acid with tetramethylguanidine. From potentiometric titrations, the pKa values in dichloroethane of hydrobromic acid, hydrochloric acid, picric acid and some sulfonphthaleins as well as some protonated nitrogen bases were determined. In the curves of the titrations of the carboxylic acids and the hydrogen halides with TMG, evidence was found for the formation of the complex B(HX)2

Critical evaluation of potentiometric redox titration in enology

Measurements of the zero current potential of a platinum electrode immersed in solutions of tanins or in wines of various origins, were performed during the additions of a solution of Ti(III), or of a solution of dichlorophenolindophenol (DCPIP), in order to obtain a global indication for the resistance to oxidation of some wines. The steady state intensity–potential curves on a platinum electrode highlight the occurrence of mixed potentials between the oxidation of ethanol or catechin and the reduction of oxygen present at very low concentrations, as well as the irreversibility of the redox system Ti(IV)/Ti(III). The adsorption of various species on the platinum and the slowness of the oxidation reactions by DCPIP exclude use of potentiometric titration theory. The shape of the potential–reagent volume curves depends on the nature of the solution and on the rate of reagent introduction. Generally, due to the slowness of the oxidation reactions with DCPIP it is impossible to find a linear relationship between the volume of titrant solution necessary to reach the inflexion point of the curves and the solution composition

Lanthanum biosorption by different Saccharomyces cerevisiae strains

Biosorption can be a promising technology in rare earth metal separation and recovery due to the low costs of waste biomasses (used as biosorbents) and the high selectivity exploiting specific interaction between metals and biological active sites. In this work, Saccharomyces cerevisiae biomass was used to recover lanthanum. Biosorption properties of two S. cerevisiae strains, wild type and rim20. mutant, have been tested. Potentiometric titrations were carried out for rim20. mutant strain and compared with wild type. Nature of the main active sites and their concentration were determined by implementing mechanistic models. Carboxylic, amino and phosphoric sites are the main groups present. Higher concentration of negatively charged sites was found in rim20. (0.0024 mol/g) than in wild type (0.0022 mol/g). The rate of lanthanum biosorption process is very fast requiring only 10-20 minutes to reach equilibrium condition for both strains. Then biosorption equilibrium tests were done for both biomasses by testing two equilibrium pH (4.0 and 6.0). Maximum uptake capacities (qmax) were: 70 mg/g and 40 mg/g at pH 4.0 for rim20. and wild type, respectively, and 67 mg/g and 80 mg/g at pH 6.0 for wild type and rim20., respectively. These data evidenced that: rim20. mutant had a higher maximum biosorption capacity with respect to wild type counterpart, and that pH had a relevant effect on lanthanum removal. S. cerevisiae yeast denoted good lanthanum biosorption properties and, between tested strains, rim20. was found to be the most promising for such aim

Solution Equilibrium Studies of Anticancer Ruthenium(II)-η6-p-cymene Complexes of Pyridinecarboxylic Acids

Stoichiometry and stability of antitumor ruthenium(II)-η6-p-cymene complexes of picolinic acid and its 6-methyl and 6-carboxylic acid derivatives were determined by pH-potentiometry, 1H NMR spectroscopy and UV–Vis spectrophotometry in aqueous solution in the presence or absence of coordinating chloride ions. The picolinates form exclusively mono-ligand complexes in which they can coordinate via the bidentate (O,N) mode and a chloride or a water molecule is found at the third binding site of the ruthenium(II)-η6-p-cymene moiety depending on the conditions. [Ru(η6-p-cymene)(L)(H2O/Cl)] species are predominant at physiological pH in all studied cases. Hydrolysis of the aqua complex or the chlorido/hydroxido co-ligand exchange results in the formation of the mixed-hydroxido species [Ru(η6-p-cymene)(L)(OH)] in the basic pH range. There is no indication for the decomposition of the mono-ligand complexes during 24 h in the ruthenium(II)-η6-p-cymene-picolinic acid system between pH 3 and 11; however, a slight dissociation with a low reaction rate was found in the other two systems leading to the appearance of the dinuclear trihydroxido-bridged species [Ru2(η6-p-cymene)2(OH)3]+ and free ligands at pH > 10. The replacement of the chlorido by an aqua ligand in [Ru(η6-p-cymene)(L)Cl] was also monitored and equilibrium constants for the exchange process were determined

Probing a Complex of Cytochromecand Cardiolipin by Magnetic Circular Dichroism Spectroscopy: Implications for the Initial Events in Apoptosis

Oxidation of cardiolipin (CL) by its complex with cytochrome c (cyt c) plays a crucial role in triggering apoptosis. Through a combination of magnetic circular dichroism spectroscopy and potentiometric titrations, we show that both the ferric and ferrous forms of the heme group of a CL:cyt c complex exist as multiple conformers at a physiologically relevant pH of 7.4. For the ferric state, these conformers are His/Lys- and His/OH–-ligated. The ferrous state is predominantly high-spin and, most likely, His/–. Interconversion of the ferric and ferrous conformers is described by a single midpoint potential of -80 ± 9 mV vs SHE. These results suggest that CL oxidation in mitochondria could occur by the reaction of molecular oxygen with the ferrous CL:cyt c complex in addition to the well-described reaction of peroxides with the ferric form

Electrochemical titrations and reaction time courses monitored in situ by magnetic circular dichroism spectroscopy

Magnetic circular dichroism (MCD) spectra, at ultraviolet–visible or near-infrared wavelengths (185–2000 nm), contain the same transitions observed in conventional absorbance spectroscopy, but their bisignate nature and more stringent selection rules provide greatly enhanced resolution. Thus, they have proved to be invaluable in the study of many transition metal-containing proteins. For mainly technical reasons, MCD has been limited almost exclusively to the measurement of static samples. But the ability to employ the resolving power of MCD to follow changes at transition metal sites would be a potentially significant advance. We describe here the development of a cuvette holder that allows reagent injection and sample mixing within the 50-mm-diameter ambient temperature bore of an energized superconducting solenoid. This has allowed us, for the first time, to monitor time-resolved MCD resulting from in situ chemical manipulation of a metalloprotein sample. Furthermore, we report the parallel development of an electrochemical cell using a three-electrode configuration with physically separated working and counter electrodes, allowing true potentiometric titration to be performed within the bore of the MCD solenoid

Two hydroxy pyridinecarboxylic acid derivatives as a possible chelating agents in neurodegenerative disease; equilibrium complexation studies with Cu(II), Zn(II).

The metal ion chelators 4-hydroxy-5-methyl-3-pyridinecarboxylic acid (DQ5) and 1,5-dimethyl-4-hydroxy-3-pyridinecarboxylic acid (DQ715) and Cu(II) and Zn(II) were investigated with the aim to restore the homeostasis of the brain Cu(II) and Zn(II) in neurodegenerative diseases. The proton dissociation constants of the ligands, the stability constants, and the coordination modes of the metal complexes formed were determined by pH-potentiometric, and spectral (UV–Vis and EPR or 1H NMR) methods. The results show that in slightly acidic and neutral pH range mono and bis complexes are formed through bidentate coordination of the ligands. The biological MTT-test reveals that the DQ715 ligand is able to lower the cytotoxic effect of Cu(II) in human embryonic kidney HEK-293 cells. Our studies revealed, however, that none of the chelators were efficient enough to withdraw these metal ions from the amyloid aggregates

Redox and Chemical Activities of the Hemes in the Sulfur Oxidation Pathway Enzyme SoxAX

BACKGROUND: SoxAX enzymes initiate microbial oxidation of reduced inorganic sulfur compounds. Their catalytic mechanism is unknown. RESULTS: Cyanide displaces the CysS(-) ligand to the active site heme following reduction by S(2)O(4)(2-) but not Eu(II). CONCLUSION: An active site heme ligand becomes labile on exposure to substrate analogs. SIGNIFICANCE: Elucidation of SoxAX mechanism is necessary to understand a widespread pathway for sulfur compound oxidation. SoxAX enzymes couple disulfide bond formation to the reduction of cytochrome c in the first step of the phylogenetically widespread Sox microbial sulfur oxidation pathway. Rhodovulum sulfidophilum SoxAX contains three hemes. An electrochemical cell compatible with magnetic circular dichroism at near infrared wavelengths has been developed to resolve redox and chemical properties of the SoxAX hemes. In combination with potentiometric titrations monitored by electronic absorbance and EPR, this method defines midpoint potentials (E(m)) at pH 7.0 of approximately +210, -340, and -400 mV for the His/Met, His/Cys(-), and active site His/CysS(-)-ligated heme, respectively. Exposing SoxAX to S(2)O(4)(2-), a substrate analog with E(m) ~-450 mV, but not Eu(II) complexed with diethylene triamine pentaacetic acid (E(m) ~-1140 mV), allows cyanide to displace the cysteine persulfide (CysS(-)) ligand to the active site heme. This provides the first evidence for the dissociation of CysS(-) that has been proposed as a key event in SoxAX catalysis

Humic acid protein complexation

Interactions of purified Aldrich humic acid (PAHA) with lysozyme (LSZ) are investigated. In solution LSZ is moderately positively and PAHA negatively charged at the investigated pH values. The proton binding of PAHA and of LSZ is determined by potentiometric proton titrations at various KCl concentrations. It is also measured for two mixtures of PAHA¿LSZ and compared with theoretically calculated proton binding assuming no mutual interaction. The charge adaptation due to PAHA¿LSZ interaction is relatively small and only significant at low and high pH. Next to the proton binding, the mass ratio PAHA/LSZ at the iso-electric point (IEP) of the complex at given solution conditions is measured together with the pH using the Mütek particle charge detector. From the pH changes the charge adaptation due to the interaction can be found. Also these measurements show that the net charge adaptation is weak for PAHA¿LSZ complexes at their IEP. PAHA/LSZ mass ratios in the complexes at the IEP are measured at pH 5 and 7. At pH 5 and 50 mmol/L KCl the charge of the complex is compensated for 30¿40% by K+; at pH 7, where LSZ has a rather low positive charge, this is 45¿55%. At pH 5 and 5 mmol/L KCl the PAHA/LSZ mass ratio at the IEP of the complex depends on the order of addition. When LSZ is added to PAHA about 25% K+ is included in the complex, but no K+ is incorporated when PAHA is added to LSZ. The flocculation behavior of the complexes is also different. After LSZ addition to PAHA slow precipitation occurs (6¿24 h) in the IEP, but after addition of PAHA to LSZ no precipitation can be seen after 12 h. Clearly, PAHA/LSZ complexation and the colloidal stability of PAHA¿LSZ aggregates depend on the order of addition. Some implications of the observed behavior are discussed