205 research outputs found
Epicuticular wax of sweet sorghum influenced the microbial community and fermentation quality of silage
Epicuticular wax, as secondary metabolites (hydrophobic compounds) covering plant surface, plays important roles in protecting plants from abiotic and biotic stresses. However, whether these compounds will influence fermentation process of silage is still not clear. In this study, two sweet sorghum cultivars with varying epicuticular wax on sheath (bloom), Yajin 2 (YJ, less bloom), and Jintian (JT, dense bloom), were harvested at flowering and maturing stages, and ensiled with or without bloom, aiming to evaluate the effects of bloom on fermentation quality, feed nutrition and microbial community. The bloom was collected manually with de-waxed cotton and extracted with chloroform. The results showed that the bloom reduced the concentrations of water-soluble carbohydrate and crude protein of the two cultivars at both stages, reduced lactic acid (LA) for YJ at both stages and for JT at flowering stage, and increased LA for JT at mature stage. The α-diversity of bacterial communities of the silage fermentation with bloom was significantly lower than that without bloom. Bloom increased the abundance of Lactobacillus, reduced that of Bacillus and Weissella, and significant correlations were observed between fermentative qualities and bacterial abundances. However, decreased diversity of bacterial community and the contents of LA implied that shifts in bacterial community might exert negative effects on silage fermentation. Our results suggest that bloom wax could alter the microbial community composition of ensiled sweet sorghums, which thus influence the fermentation qualities
Identification of ankle sprain motion from common sporting activities by dorsal foot kinematics data
This study presented a method to identify ankle sprain motion from common sporting activities by dorsal foot kinematics data. Six male subjects performed 300 simulated supination sprain trials and 300 non-sprain trials in a laboratory. Eight motion sensors were attached to the right dorsal foot to collect three-dimensional linear acceleration and angular velocity kinematics data, which were used to train up a support vector machine (SVM) model for the identification purpose. Results suggested that the best identification method required only one motion sensor located at the medial calcaneus, and the method was verified on another group of six subjects performing 300 simulated supination sprain trials and 300 non-sprain trials. The accuracy of this method was 91.3%, and the method could help developing a mobile motion sensor system for ankle sprain detection
Demonstration of coherent terahertz transition radiation from relativistic laser-solid interactions
Coherent transition radiation in the terahertz (THz) region with energies of sub-mJ/pulse has been demonstrated by relativistic laser-driven electron beams crossing the solid-vacuum boundary. Targets including mass-limited foils and layered metal-plastic targets are used to verify the radiation mechanism and characterize the radiation properties. Observations of THz emissions as a function of target parameters agree well with the formation-zone and diffraction model of transition radiation. Particle-in-cell simulations also well reproduce the observed characteristics of THz emissions. The present THz transition radiation enables not only a potential tabletop brilliant THz source, but also a novel noninvasive diagnostic for fast electron generation and transport in laser-plasma interactions
Towards Terawatt-Scale Spectrally Tunable Terahertz Pulses via Relativistic Laser-Foil Interactions
An ever-increasing number of strong-field applications, such as ultrafast coherent control over matter and light, require driver light pulses that are both high power and spectrally tunable. The realization of such a source in the terahertz (THz) band has long been a formidable challenge. Here, we demonstrate, via experiment and theory, efficient production of terawatt (TW)-level THz pulses from high-intensity picosecond laser irradiation on a metal foil. It is shown that the THz spectrum can be manipulated effectively by tuning the laser pulse duration or target size. A general analytical framework for THz generation is developed, involving both the high-current electron emission and a time-varying electron sheath at the target rear, and the spectral tunability is found to stem from the change of the dominant THz generation mechanism. In addition to being an ultrabright source (brightness temperature of about 1021 K) for extreme THz science, the THz radiation presented here also enables a unique in situ laser-plasma diagnostic. Employing the THz radiation to quantify the escaping electrons and the transient sheath shows good agreement with experimental measurements
Abnormal hubs in global network as potential neuroimaging marker in generalized anxiety disorder at rest
BackgroundMounting studies have reported altered neuroimaging features in generalized anxiety disorder (GAD). However, little is known about changes in degree centrality (DC) as an effective diagnostic method for GAD. Therefore, we aimed to explore the abnormality of DCs and whether these features can be used in the diagnosis of GAD.MethodsForty-one GAD patients and 45 healthy controls participated in the study. Imaging data were analyzed using DC and receiver operating characteristic (ROC) methods.ResultsCompared with the control group, increased DC values in bilateral cerebellum and left middle temporal gyrus (MTG), and decreased DC values in the left medial frontal orbital gyrus (MFOG), fusiform gyrus (FG), and bilateral posterior cingulate cortex (PCC). The ROC results showed that the DC value of the left MTG could serve as a potential neuroimaging marker with high sensitivity and specificity for distinguishing patients from healthy controls.ConclusionOur findings demonstrate that abnormal DCs in the left MTG can be observed in GAD, highlighting the importance of GAD pathophysiology
CodeFuse-13B: A Pretrained Multi-lingual Code Large Language Model
Code Large Language Models (Code LLMs) have gained significant attention in
the industry due to their wide applications in the full lifecycle of software
engineering. However, the effectiveness of existing models in understanding
non-English inputs for multi-lingual code-related tasks is still far from well
studied. This paper introduces CodeFuse-13B, an open-sourced pre-trained code
LLM. It is specifically designed for code-related tasks with both English and
Chinese prompts and supports over 40 programming languages. CodeFuse achieves
its effectiveness by utilizing a high quality pre-training dataset that is
carefully filtered by program analyzers and optimized during the training
process. Extensive experiments are conducted using real-world usage scenarios,
the industry-standard benchmark HumanEval-x, and the specially designed
CodeFuseEval for Chinese prompts. To assess the effectiveness of CodeFuse, we
actively collected valuable human feedback from the AntGroup's software
development process where CodeFuse has been successfully deployed. The results
demonstrate that CodeFuse-13B achieves a HumanEval pass@1 score of 37.10%,
positioning it as one of the top multi-lingual code LLMs with similar parameter
sizes. In practical scenarios, such as code generation, code translation, code
comments, and testcase generation, CodeFuse performs better than other models
when confronted with Chinese prompts.Comment: 10 pages with 2 pages for reference
Recent Progress in Electrospun Nanofibres: Reinforcement Effect and Mechanical Performance
Composite materials are becoming increasingly important as structural materials for aeronautical and space engineering, naval, automotive, and civil engineering, sporting goods, and other consumer products. Fiber-based reinforcement represents one of the most effective manufacturing strategies for enhancing the mechanical strength and other properties of composite materials. Electrospinning has gained widespread interest in the last two decades because of its ability to fabricate continuous ultrafine nanofibers with unique characteristics. The impact of electrospinning on fiber synthesis and processing, characterization, and applications in drug delivery, nanofiltration, tissue scaffolding, and electronics has been extensively studied in the past. In this article, the authors have focused on a comprehensive review of the mechanical performance and properties of electrospun nanofibers as potential reinforcements as well as their advanced nanocomposites
Real-time Monitoring for the Next Core-Collapse Supernova in JUNO
Core-collapse supernova (CCSN) is one of the most energetic astrophysical
events in the Universe. The early and prompt detection of neutrinos before
(pre-SN) and during the SN burst is a unique opportunity to realize the
multi-messenger observation of the CCSN events. In this work, we describe the
monitoring concept and present the sensitivity of the system to the pre-SN and
SN neutrinos at the Jiangmen Underground Neutrino Observatory (JUNO), which is
a 20 kton liquid scintillator detector under construction in South China. The
real-time monitoring system is designed with both the prompt monitors on the
electronic board and online monitors at the data acquisition stage, in order to
ensure both the alert speed and alert coverage of progenitor stars. By assuming
a false alert rate of 1 per year, this monitoring system can be sensitive to
the pre-SN neutrinos up to the distance of about 1.6 (0.9) kpc and SN neutrinos
up to about 370 (360) kpc for a progenitor mass of 30 for the case
of normal (inverted) mass ordering. The pointing ability of the CCSN is
evaluated by using the accumulated event anisotropy of the inverse beta decay
interactions from pre-SN or SN neutrinos, which, along with the early alert,
can play important roles for the followup multi-messenger observations of the
next Galactic or nearby extragalactic CCSN.Comment: 24 pages, 9 figure
- …