Use of a new enrichment nanosorbent for speciation of mercury by FI-CV-ICP-MS

Mercury is one of the most toxic environmental pollutants and its effects on human and ecosystem health are well known. All mercury species are toxic, with organic mercury compounds generally being more toxic than inorganic species. Chromatography techniques (GC, HPLC) coupled to element specific detectors, are able to separate mercury species in order to elucidate mercury transformation and transport processes where the determination of all mercury species is desirable. However, in practice, especially in sampling campaigns for sea water analysis where a large number of samples are collected over a longer period of time, a combination of methods is usually applied to accurately determine the most toxic mercury species. These include non-chromatographic methods based on the different chemical and/or physical behavior of the mercury species. These non-chromatographic methods can be less time consuming, more cost effective and available, and present competitive limits of detection. Especially when mercury could vapor (CV) generation technique is employed, which reduces salt effect on the analytical signal and improve the sensibility. Among non-chromatographic methods, solid phase extraction and microextraction (SPE and SPME) which is becoming increasingly popular for sample preparation in organic analysis, found its way to speciation analysis of organometals. SPE/SPME is the most popular sample preconcentration method for its simplicity, high enrichment factor, low or no consumption of organic solvents and feasibly to be automated. On the other hand, the exploration of new materials, especially nanometer sized materials, as the support phase is another active research area in SPE/SPME for mercury determination. The use of nanoparticles leads to higher extraction capacity/efficiency and rapid dynamics of extraction originated from the higher surface area to volume ratio and short diffusion route. In this work, a new enrichment nanosorbent functionalized with 1,5 bis (2-pyridyl) methylene thiocarbohidrazide was synthesized and characterized. From the study of its adsorption capacity toward metal ions, Hg2+ was observed to be one of the most retained 173.1 µmol g-1 at pH 5. Thus, a flow injection solid phase extraction and cold vapor generation method for its determination and speciation based on the use of this new chelating nanosorbent was optimized. The method developed has showed to be useful for the automatic pre-concentration and sequential speciation of mercury and methylmercury in environmental and biological samples. The system was based on chelating retention of the analytes onto a mini-column filled with the new nanosorbent and their sequential elution by using two different eluents, 0.2 % HCl for CH3Hg+ and 0.1 % thiourea in 0.5 % HCl for Hg2+. The determination was performed using inductively coupled plasma mass spectrometry. Under the optimum conditions and 120 s preconcentration time, the enrichment factors were 4.7 and 11.0; the detection limits (3σ) were 0.002 and 0.004 µg L-1; the determination limits (10σ) were 0.011 and 0.024 µg L-1; and the precisions (calculated for 10 replicate determinations at a 2 µg L-1 standard of both species) were 2.8 and 2.6 % (RSD); for CH3Hg+ and Hg2+, respectively. Linear calibration graphs were obtained for both species from the determination limits to at least 70 µg L-1. For the quality control of the analytical performance and the validation of the newly developed method, the analysis of two certified samples, LGC 6016 estuarine water and SRM 2976 mussel tissue were addressed. The results showed good agreement with the certified values. The method was successfully applied to the speciation of mercury in sea-water samples collected in the Málaga Bay.Universidad de Málaga. Campus de Excelencia Internacional Andalucía Tech

ERS International Congress 2020 Virtual: highlights from the Allied Respiratory Professionals Assembly

This article provides an overview of outstanding sessions that were (co)organised by the Allied Respiratory Professionals Assembly during the European Respiratory Society International Congress 2020, which this year assumed a virtual format. The content of the sessions was mainly targeted at allied respiratory professionals, including respiratory function technologists and scientists, physiotherapists, and nurses. Short take-home messages related to spirometry and exercise testing are provided, highlighting the importance of quality control. The need for quality improvement in sleep interventions is underlined as it may enhance patient outcomes and the working capacity of healthcare services. The promising role of digital health in chronic disease management is discussed, with emphasis on the value of end-user participation in the development of these technologies. Evidence on the effectiveness of airway clearance techniques in chronic respiratory conditions is provided along with the rationale for its use and challenges to be addressed in future research. The importance of assessing, preventing and reversing frailty in respiratory patients is discussed, with a clear focus on exercise-based interventions. Research on the impact of disease-specific fear and anxiety on patient outcomes draws attention to the need for early assessment and intervention. Finally, advances in nursing care related to treatment adherence, self-management and patients’ perspectives in asthma and chronic obstructive pulmonary disease are provided, highlighting the need for patient engagement and shared decision making. This highlights article provides readers with valuable insight into the latest scientific data and emerging areas affecting clinical practice of allied respiratory professionals.European CommissionFWOCenter for Innovative Care and Health Technology (ciTechCare) of the Polytechnic of Leiria - Fundacao para a Ciencia e Tecnologia (FCT) UIDB/05704/2020 UIDP/05704/202

Experimental and computational optimization of eco-friendly mortar blocks for high temperature thermal energy storage of concentrated solar power plants

New avenues for thermal energy storage (TES) need to be investigated due to the lack of competitiveness of concentrated solar power (CSP) technologies. Solutions must be found to replace molten salt tanks which have a major economic impact and are difficult to maintain due to corrosion problems. In this sense, concrete represented an attractive candidate by proving excellent sensible TES in CSP. However, its main phase, made of Portland cement (PC), has significant environmental consequences. The production of PC is known to emit high levels of polluting gases, particularly the CO2. It is estimated to be responsible for between 5% and 7% of the world's CO2 emissions, making it a major contributor to climate change. This work presents greener cementitious materials, made of alkaline cements and hybrids cements, to be used as alternative eco-friendly TES media in CSP plants. An experimental campaign is presented which shows that these eco-efficient materials can have better mechanical properties, than the ordinary PC mortar, when exposed to high temperatures, in addition, can offer improvements of their thermal properties (thermal conductivity or specific heat). Second part of the work is devoted to Finite Element simulations, with the aim to find the best configuration, in terms of selection of materials and geometry, which are more efficient as TES system. The work is showing the following advancements in CSP technology by using alternative eco-friendly binders: the installation volume can be reduced by 17%, compared to a molten salt tank, while the heat exchanger's surface area can be resized by 29%, compared to the reference system using PC. These improvements enable wider variations in CSP operational efficiency and dynamic capabilities and represent important progress towards developing more efficient and sustainable CSP technologies.This study was funded by MCIN/AEI/10.13039/501100011033 and Europe Union NextGenerationEU/PRTR under the National Project TED2021-130633B-I00 and under the National Project PID2021-125810OB-C22.Publicad

Influence of Cardiorespiratory Clinical Placements on the Specialty Interest of Physiotherapy Students

Clinical placements are an important part of health students’ training. Whilst much value is placed on the clinical environment as a place to learn, there is a paucity of direct evidence about its effectiveness. The aim of this study was to compare the competence, importance, and interest in cardiorespiratory physiotherapy of students before and after one month of clinical practice. A preand post-placement questionnaire about students’ interest in different physiotherapy subspecialties was used. The students with a cardiorespiratory clinical placement showed a significant change in their perception about the importance of the cardiorespiratory specialty (0.348 1.01; p < 0.001), while no significant change was observed in the students without cardiorespiratory placement (-0.014 0.825; p = 0.883). The presence or absence of clinical placements seems to have a definitive impact on students’ choice of a specialty. This implies the need for developing a set of clinical placements in all the subareas of physiotherapy in order to give undergraduate students the opportunity to make a better decision

Impact of Previous Physical Activity Levels on Symptomatology, Functionality, and Strength during an Acute Exacerbation in COPD Patients

The main objective of this study is to determine the relationship between physical activity (PA) level prior to hospitalization and the pulmonary symptomatology, functionality, exercise capacity, and strength of acute exacerbated chronic obstructive pulmonary disease (COPD) patients. In this observational study, all data were taken during the patient’s first day in hospital. Patients were divided into two groups (a PA group, and a physical inactivity (PI) group), according to the PA level evaluated by the Baecke questionnaire. Cough status was evaluated by the Leicester Cough Questionnaire (LCQ), and dyspnea was assessed using the modified Medical Research Council dyspnea scale (mMRC). Functionality was measured by the Functional Independence Measure (FIM) and the London Chest Activity of Daily Living scale (LCADL). Exercise capacity was evaluated by the two-minute step-in-place (2MSP) test, and strength assessed by dynamometry. A total of 151 patients were included in this observational study. Patients in the PI group obtained worse results compared to the PA group, and significant differences (p < 0.05) were found in all of the variables. Those COPD patients who regularly perform PA have less dyspnea and cough, as well as better functionality, exercise capacity and strength during an exacerbation, without relationship to the severity of the pathology.The author JRT has received financial support through a FPU (“Formación Profesorado Universitario”) grant (FPU:16/01531) of the Spanish Ministry of Education. The author LLL has received financial support through a FPU grant (FPU: 17/00408) of the Spanish Ministry of Education (Spain)

Effects of the COVID-19 Pandemic on Physical Activity in Chronic Diseases: A Systematic Review and Meta-Analysis

This work was supported by the Spanish Ministry of Education by a FPU ("Formacion Profesorado Universitario") grant for the authors Andres Calvache-Mateo and Laura Lopez-Lopez (grant number, FPU:19/02609, FPU:17/00408).The management of chronic diseases (CD) includes physical activity (PA). It is necessary to determine the effects of COVID-19 restrictions in CD. The aim was to review the research related to PA levels before and during the COVID-19 pandemic in people with CD. This review was designed according to PRISMA guidelines and registered in PROSPERO: CRD42020218825. The search was performed in CINAHL, Medline, Scopus, and Web of Science up to January 2021. The PICOS recommendations were applied. The search was conducted by two reviewers, who completed the data extraction of included articles. Methodological quality was assessed using the STROBE checklist, and a meta-analysis was conducted. The literature search strategy identified 227 articles. Five studies remained and were included. Only three studies were included in the meta-analysis. Two articles used accelerometers to objectively compare PA levels before and during the pandemic. Three studies made this comparison using an online survey. All articles showed a decrease in PA levels during the COVID-19 pandemic. The meta-analysis showed a significant reduction in PA levels during pandemic. PA levels during the COVID-19 pandemic have been reduced with respect to previous levels of PA in patients with CD.German Research Foundation (DFG) FPU:19/02609 FPU:17/0040

Meningococcal group B vaccine for the prevention of invasive meningococcal disease caused by Neisseria meningitidis serogroup B

Invasive meningococcal disease (IMD) is a major public health concern because of its high case fatality, long-term morbidity, and potential to course with outbreaks. IMD caused by Nesseira meningitidis serogroup B has been predominant in different regions of the world like Europe and only recently broadly protective vaccines against B serogroup have become available. Two protein-based vaccines, namely 4CMenB (Bexsero®) and rLP2086 (Trumenba®) are currently licensed for use in different countries against MenB disease. These vaccines came from a novel technology on vaccine design (or antigen selection) using highly specific antigen targets identified through whole-genome sequence analysis. Moreover, it has the potential to confer protection against non-B meningococcus and against other Neisserial species such as gonococcus. Real-world data on the vaccine-use are rapidly accumulating from the UK and other countries which used the vaccine for control of outbreak or as part of routine immunization program, reiterating its safety and efficacy. Additional data on real-life effectiveness, long-term immunity, and eventual herd effects, including estimates on vaccine impact for cost-effectiveness assessment are further needed. Given the predominance of MenB in Europe and other parts of the world, these new vaccines are crucial for the prevention and public health control of the disease, and should be considered.S

Spatial Quality Evaluation of Resampled Unmanned Aerial Vehicle-Imagery for Weed Mapping

Unmanned aerial vehicles (UAVs) combined with different spectral range sensors are an emerging technology for providing early weed maps for optimizing herbicide applications. Considering that weeds, at very early phenological stages, are similar spectrally and in appearance, three major components are relevant: spatial resolution, type of sensor and classification algorithm. Resampling is a technique to create a new version of an image with a different width and/or height in pixels, and it has been used in satellite imagery with different spatial and temporal resolutions. In this paper, the efficiency of resampled-images (RS-images) created from real UAV-images (UAV-images; the UAVs were equipped with two types of sensors, i.e., visible and visible plus near-infrared spectra) captured at different altitudes is examined to test the quality of the RS-image output. The performance of the object-based-image-analysis (OBIA) implemented for the early weed mapping using different weed thresholds was also evaluated. Our results showed that resampling accurately extracted the spectral values from high spatial resolution UAV-images at an altitude of 30 m and the RS-image data at altitudes of 60 and 100 m, was able to provide accurate weed cover and herbicide application maps compared with UAV-images from real flights

Influence of information concerning a computerized anesthesia system on dental anxiety : a randomized controlled clinical trial

A single-blinded randomized controlled trial among patients requiring an upper third molar extraction was performed to evaluate the anxiety degree after receiving information or not about the functioning of The Wand system. Secondarily, perceived pain and the need of re-anesthesia were assessed. Patients were randomly assigned to the experimental group (detailed explanation about The Wand) or control group (no specific information). Local anesthesia with The Wand consisted in a supraperiosteal infiltrative technique injection 1.6 mL at the buccal and 0.2 mL at the palatal side. Distinct questionnaires for assessing dental anxiety and 100-mm visual analog scales to assess pain were delivered. Demographic data, radiological parameters, operative time and type of intervention were also registered. A descriptive bivariate analysis by non-parametric tests to detect differences in anxiety, pain and re-anesthesia was performed by SPSS 22.0 (SPPS Inc. Chicago, USA). A total of 85 patients were assessed for eligibility but 17 participants were lost due to the cancellation of the visit for the surgical intervention. Finally, sixty-eight patients were included (34 participants in each group), 47 women (69.1%) and 21 men (30.9%), with an average age of 28.8 (± 9.3) years. Patients that received a detailed explanation of The Wand did not have a significant reduction of the anxiety degree and perceived pain during the anesthetic act compared to patients that received no information. The need of re-anesthesia was not related to the anxiety level but was significantly related to increasing operative time