Study on Arc Welding Processes for High Deposition Rate Additive Manufacturing

Although Additive Manufacturing implementation is rapidly growing, industrial sectors are demanding an increase of manufactured part size which most extended processes, such as Selective Laser Melting (SLM) or Laser Metal Deposition (LMD), are not able to offer. In this sense, Wire-Arc Additive Manufacturing (WAAM) offers high deposition rates and quality without size limits, becoming the best alternative for additive manufacturing of medium-large size parts with high mechanical requirements such as structural parts in the aeronautical industry. WAAM technology adds material in form of wire using an arc welding process in order to melt both the wire and the substrate. There are three welding processes that are mainly used in WAAM: Plasma Arc Welding (PAW), Gas Tungsten Arc Welding (GTAW or TIG) and Gas Metal Arc Welding (GMAW or MIG). This paper studies these processes regarding on their capabilities for additive manufacturing and compares the mechanical properties obtained by the different welding technologies applied in WAAM. Obtained results show the applicability of the technology as an alternative of traditional metallic preforms manufacturing processes, such as casting or forging

Wire Arc Additive Manufacturing of Mn4Ni2CrMo Steel: Comparison of Mechanical and Metallographic Properties of PAW and GMAW

Wire arc additive manufacturing, WAAM, is a popular wire-feed additive manufacturing technology that creates components through the deposition of material layer-by-layer. WAAM has become a promising alternative to conventional machining due to its high deposition rate, environmental friendliness and cost competitiveness. In this research work, a comparison is made between two different WAAM technologies, GMAW (gas metal arc welding) and PAW (plasma arc welding). Comparative between processes is centered in the main variations while manufacturing Mn4Ni2CrMo steel walls concerning geometry and process parameters maintaining the same deposition ratio as well as the mechanical and metallographic properties obtained in the walls with both processes, in which the applied energy is significantly different. This study shows that acceptable mechanical characteristics are obtained in both processes compared to the corresponding forging standard for the tested material, values are 23% higher for UTS and 56% for elongation in vertical direction in the PAW process compared to GMAW (no differences in UTS and elongation results for horizontal direction and in Charpy for both directions) and without significant directional effects of the additive manufacturing technology used.This research was funded by BASQUE GOVERNMENT, grant number KK-2018/00115 (ADDISEND, ELKARTEK 2018 programme) and grant number ZE-2017/00038 (HARITIVE, HAZITEK 2017 programme)

Statistical analysis of toxicological data of victims of traffic accidents in Galicia (Spain)

Driving under the influence of alcohol or drugs is a very common behavior in our environment and a serious problem for public health. On the one hand, in 2016, 400,000 people died in the world in traffic accidents in which ethanol was involved. On the other hand, traffic accidents in which the use of drugs of abuse other than ethyl alcohol accounted for more than 160,000 deaths worldwide in 2017. The objective of this work is to carry out a review of the 710 cases of people who died in traffic accidents received at the forensic toxicology service of the Institute of Forensic Sciences of the University of Santiago de Compostela (Galicia-Spain) over a period of 10 years (2009–2019). We performed an observational study of period prevalence, in which the following data were collected: age, sex, year, and analytical results in plasma, in the case of being positive. The data collected was subjected to statistical treatment. Of the 710 cases analyzed, 123 correspond to pedestrians and 587 to occupants of vehicles or motorcycles. A total of 77.6% of the deceased were men. At least one psychotropic substance was found in the blood of almost 40% of the victims. The most frequently found substance was ethyl alcohol, which appeared in 231 cases, more frequently in males. The second place is occupied by benzodiazepines, which appeared in 43 cases, followed by cocaine, which was detected in 25 cases. Polydrug use was found in only 44 cases, with the association of ethanol and cocaine being the most commonly found, followed by that of ethanol and benzodiazepines. Only in 5 of the cases analyzed there were 3 or more substances present. With the data obtained in this study, it is shown that in traffic accidents, the finding of different toxic or medicinal substances is frequent. Ethyl alcohol continues to be very present in road accidents (most detected substance), with the great impact that this implies. Secondly, the presence of benzodiazepines stands out, and cocaine is the third most detected toxic in this study. These results allow to obtain a profile of the substances most frequently involved in traffic accidents. Despite the surveillance, control, and information campaigns that the Spanish Government regularly carries out, the results are far from satisfactoryOpen Access funding provided thanks to the CRUE-CSIC agreement with Springer NatureS

Whole-Exome sequencing reveals recurrent but heterogeneous mutational profiles in sporadic who grade 1 meningiomas

© 2021 González-Tablas, Prieto, Arandia, Jara-Acevedo, Otero, Pascual, Ruíz, Álvarez-Twose, García-Montero, Orfao and Tabernero.Human WHO grade 1 meningiomas are generally considered benign tumors; despite this, they account for ≈50% of all recurrent meningiomas. Currently, limited data exist about the mutational profiles of grade 1 meningiomas and patient outcome. We investigated the genetic variants present in 32 WHO grade 1 meningiomas using whole exome sequencing, and correlated gene mutational profiles with tumor cytogenetics and patient outcome. Overall, WHO grade 1 meningiomas harbored numerous and heterogeneous genetic variants, which most frequently affected the NF2 (47%) gene and to a less extent the PNMA6A (22%), TIGD1 (16%), SMO (13%), PTEN (13%), CREG2 (9%), EEF1A1 (6%), POLR2A (6%), ARID1B (3%), and FAIM3 (3%) genes. Notably, non-synonymous genetic variants of SMO and POLR2A were restricted to diploid meningiomas, whereas NF2 mutations were only found among tumors that showed -22/22q─ (with or without a complex karyotype). Based on NF2 mutations and tumor cytogenetics, four genetic profiles were defined with an impact on patient recurrence-free survival (RFS). These included (1) two good-prognosis tumor subgroups—diploid meningiomas (n=9) and isolated -22/22q─ associated with NF2 mutation (n=7)—with RFS rates at 10 y of 100%; and (2) two subgroups of poor-prognosis meningiomas—isolated -22/22q─ without NF2 mutation (n=3) and tumors with complex karyotypes (n=11)—with a RFS rate at 10 y of 48% (p=0.003). Our results point out the existence of recurrent but heterogeneous mutational profiles in WHO grade 1 meningiomas which have an impact on patient outcome.This work was supported by grants: IBY 17/00002 from IBSAL (Salamanca, Spain), GRS2132/A2020 from Junta de Castilla y León (Spain), and CB16/12/00400 from CIBER-ONC and FONDOS FEDER (Instituto de Salud Carlos III, Ministerio de Economía y Competitividad, Madrid, Spain)

Age and date for early arrival of the Acheulian in Europe (Barranc de la Boella, la Canonja, Spain)

The first arrivals of hominin populations into Eurasia during the Early Pleistocene are currently considered to have occurred as short and poorly dated biological dispersions. Questions as to the tempo and mode of these early prehistoric settlements have given rise to debates concerning the taxonomic significance of the lithic assemblages, as trace fossils, and the geographical distribution of the technological traditions found in the Lower Palaeolithic record. Here, we report on the Barranc de la Boella site which has yielded a lithic assemblage dating to ,1 million years ago that includes large cutting tools (LCT). We argue that distinct technological traditions coexisted in the Iberian archaeological repertoires of the late Early Pleistocene age in a similar way to the earliest sub-Saharan African artefact assemblages. These differences between stone tool assemblages may be attributed to the different chronologies of hominin dispersal events. The archaeological record of Barranc de la Boella completes the geographical distribution of LCT assemblages across southern Eurasia during the EMPT (Early-Middle Pleistocene Transition, circa 942 to 641 kyr). Up to now, chronology of the earliest European LCT assemblages is based on the abundant Palaeolithic record found in terrace river sequences which have been dated to the end of the EMPT and later. However, the findings at Barranc de la Boella suggest that early LCT lithic assemblages appeared in the SW of Europe during earlier hominin dispersal episodes before the definitive colonization of temperate Eurasia took place.The research at Barranc de la Boella has been carried out with the financial support of the Spanish Ministerio de Economı´a y Competitividad (CGL2012- 36682; CGL2012-38358, CGL2012-38434-C03-03 and CGL2010-15326; MICINN project HAR2009-7223/HIST), Generalitat de Catalunya, AGAUR agence (projects 2014SGR-901; 2014SGR-899; 2009SGR-324, 2009PBR-0033 and 2009SGR-188) and Junta de Castilla y Leo´n BU1004A09. Financial support for Barranc de la Boella field work and archaeological excavations is provided by the Ajuntament de la Canonja and Departament de Cultura (Servei d’Arqueologia i Paleontologia) de la Generalitat de Catalunya. A. Carrancho’s research was funded by the International Excellence Programme, Reinforcement subprogramme of the Spanish Ministry of Education. I. Lozano-Ferna´ndez acknowledges the pre-doctoral grant from the Fundacio´n Atapuerca. The funders had no role in study design, data collection and analysis, decision to publish, or preparation of the manuscript

Determination of seven antidepressants in pericardial fluid by means of dispersive liquid–liquid microextraction and gas chromatography–mass spectrometry

Although blood is often used to detect and quantify the presence of drugs, there are some instances where samples obtained from other biological matrices, like pericardial fluid (PF), are necessary since adequate blood samples may not be available. PF is an epicardial transudate, which contains plasma components that include toxicological substances making this sample useful when blood samples are not available. This fluid is a well-preserved postmortem sample and can easily be collected in larger amounts without significant contamination, compared with other body fluids. Although studies involving PF began around the 1980s, the adequacy of such fluid as a biological matrix has been poorly investigated. Antidepressants are frequently detected in postmortem samples from forensic cases. Nowadays, they constitute some of the most commonly prescribed drugs worldwide. A total of seven antidepressants (venlafaxine, mirtazapine, olanzapine, paroxetine, sertraline, fluoxetine and citalopram) were evaluated in this study. A new extraction method involving dispersive liquid–liquid microextraction (DLLME) is presented in which chloroform and acetonitrile are determined to be the best extraction and dispersing solvents. The experimental design was achieved using StatGraphics 18. The response surface methodology enabled us to know the optimal volume for the two solvents used in the DLLME. The detection technique used was gas chromatography–mass spectrometry with electron impact ionization as ionization source. A temperature gradient has been used and the total chromatographic separation time was 19.43 min. Validation results met the international validation guidance (Food and Drug Administration (FDA)). Under the optimal condition, the method offered good validation parameters showing a new efficient, simple, rapid and sensitive method. The analytical method was applied to 31 PF samples. Twenty-one samples were positive with concentrations between 0.19 and 8.48 µg/mL. Venlafaxine and olanzapine were the antidepressants most frequently foundS

Determination of Topiramate and Carbamazepine in Plasma by Combined Dispersive Liquid–Liquid Microextraction and Gas Chromatography–Mass Spectrometry

Dispersive liquid–liquid microextraction, an environmentally friendly extraction technique, followed by gas chromatography–mass spectrometry operating in selected ion monitoring (SIM) mode, is here presented for the simultaneous determination of two anticonvulsant drugs in plasma, Topiramate and Carbamazepine. Experimental parameters affecting the recovery of the proposed extraction method, such as the extraction and dispersion solvent, the extraction and dispersion volume, the sample amount, the pH of the aqueous phase, the ultrasound time, the centrifugation time and ionic strength, were investigated. The limits of detection for Topiramate and Carbamazepine were 0.01 and 0.025 µg mL−1, and the limits of quantification were 0.025 µg mL−1 and 0.05 µg mL−1, respectively. The method is shown to be selective, accurate, precise and linear over the concentration ranges of 0.025–8 µg mL−1 for Topiramate and 0.05–3 µg mL−1 for Carbamazepine. The extraction recovery of the analytes ranged from 91.5% to 113.9%. The analytical method was successfully applied to real plasma samples received by the Forensic Toxicology Service of the Forensic Science Institute of Santiago de Compostela