Surface and atmospheric driven variability of the single‐layer urban canopy model under clear‐sky conditions over London

Urban canopy models (UCMs) are parametrization schemes that are used to improve weather forecasts in urban areas. The performance of UCMs depends on understanding potential uncertainty sources that can generally originate from the (a) urban surface parameters, (b) atmospheric forcing, and (c) physical description. Here, we investigate the relative importance of surface and atmospheric driven model sensitivities of the single‐layer urban canopy model when fully interactive with a 1‐D configuration of the Weather Research and Forecasting model (WRF). The impact of different physical descriptions in UCMs and other key parameterization schemes of WRF is considered. As a case study, we use a 54‐h period with clear‐sky conditions over London. Our analysis is focused on the surface radiation and energy flux partitioning and the intensity of turbulent mixing. The impact of changes in atmospheric forcing and surface parameter values on model performance appears to be comparable in magnitude. The advection of potential temperature, aerosol optical depth, exchange coefficient and roughness length for heat, surface albedo, and the anthropogenic heat flux are the most influential. Some atmospheric forcing variations have similar impact on the key physical processes as changes in surface parameters. Hence, error compensation may occur if one optimizes model performance using a single variable or combinations that have potential for carryover effects (e.g., temperature). Process diagrams help differences to be understood in the physical description of different UCMs, boundary layer, and radiation schemes and between the model and the observations

Evaluation of the Diurnal Cycle in the Atmospheric Boundary Layer Over Land as Represented by a Variety of Single-Column Models: The Second GABLS Experiment

We present the main results from the second model intercomparison within the GEWEX (Global Energy andWater cycle EXperiment) Atmospheric Boundary Layer Study (GABLS). The target is to examine the diurnal cycle over land in today’s numerical weather prediction and climate models for operational and research purposes. The set-up of the case is based on observations taken during the Cooperative Atmosphere-Surface Exchange Study-1999 (CASES-99), which was held in Kansas, USA in the early autumn with a strong diurnal cycle with no clouds present. The models are forced with a constant geostrophic wind, prescribed surface temperature and large-scale divergence. Results from 30 different model simulations and one large-eddy simulation (LES) are analyzed and compared with observations. Even though the surface temperature is prescribed, the models give variable near-surface air temperatures. This, in turn, gives rise to differences in low-level stability affecting the turbulence and the turbulent heat fluxes. The increase in modelled upward sensible heat flux during the morning transition is typically too weak and the growth of the convective boundary layer before noon is too slow. This is related to weak modelled nearsurface winds during the morning hours. The agreement between the models, the LES and observations is the best during the late afternoon. From this intercomparison study, we find that modelling the diurnal cycle is still a big challenge. For the convective part of the diurnal cycle, some of the first-order schemes perform somewhat better while the turbulent kinetic energy (TKE) schemes tend to be slightly better during nighttime conditions. Finer vertical resolution tends to improve results to some extent, but is certainly not the solution to all the deficiencies identifie

Evaluation of onset, cessation and seasonal precipitation of the Southeast Asia rainy season in CMIP5 regional climate models and HighResMIP global climate models

Representing the rainy season of the maritime continent is a challenge for global and regional climate models. Here, we compare regional climate models (RCMs) based on the coupled model intercomparison project phase 5 (CMIP5) model generation with high-resolution global climate models with a comparable spatial resolution from the HighResMIP experiment. The onset and the total precipitation of the rainy season for both model experiments are compared against observational datasets for Southeast Asia. A realistic representation of the monsoon rainfall is essential for agriculture in Southeast Asia as a delayed onset jeopardizes the possibility of having three annual crops. In general, the coupled historical runs (Hist-1950) and the historical force atmosphere run (HighresSST) of the high-resolution model intercomparison project (HighResMIP) suite were consistently closer to the observations than the RCM of CMIP5 used in this study. We find that for the whole of Southeast Asia, the HighResMIP models simulate the onset date and the total precipitation of the rainy season over the region closer to the observations than the other model sets used in this study. High-resolution models in the HighresSST experiment showed a similar performance to their low-resolution equivalents in simulating the monsoon characteristics. The HighresSST experiment simulated the anomaly of the onset date and the total precipitation for different El Niño-southern oscillation conditions best, although the magnitude of the onset date anomaly was underestimated. © 2021 The Authors. International Journal of Climatology published by John Wiley Sons Ltd on behalf of Royal Meteorological Society

Urban Water Storage Capacity Inferred From Observed Evapotranspiration Recession

Water storage plays an important role in mitigating heat and flooding in urban areas. Assessment of the water storage capacity of cities remains challenging due to the inherent heterogeneity of the urban surface. Traditionally, effective storage has been estimated from runoff. Here, we present a novel approach to estimate effective water storage capacity from recession rates of observed evaporation during precipitation-free periods. We test this approach for cities at neighborhood scale with eddy-covariance based latent heat flux observations from 14 contrasting sites with different local climate zones, vegetation cover and characteristics, and climates. Based on analysis of 583 drydowns, we find storage capacities to vary between 1.3 and 28.4 mm, corresponding to e-folding timescales of 1.8-20.1 days. This makes the urban storage capacity at least five times smaller than all the observed values for natural ecosystems, reflecting an evaporation regime characterized by extreme water limitation.Peer reviewe

Exploring the Possible Role of Small-Scale Terrain Drag on Stable Boundary Layers over Land

This paper addresses the possible role of unresolved terrain drag, relative to the turbulent drag on the development of the stable atmospheric boundary layer over land. Adding a first-order estimate for terrain drag to the turbulent drag appears to provide drag that is similar to the enhanced turbulent drag obtained with the so-called long-tail mixing functions. These functions are currently used in many operational models for weather and climate, although they lack a clear physical basis. Consequently, a simple and practical quasi-empirical parameterization of terrain drag divergence for use in large-scale models is proposed and is tested in a column mode. As an outcome, the cross-isobaric mass flow (a measure for cyclone filling) with the new scheme, using realistic turbulent drag, appears to be equal to what is found with the unphysical long-tail scheme. At the same time, the new scheme produces a much more realistic less-deep boundary layer than is obtained by using the long-tail mixing function.Keywords: Land surface, Small scale processes, Boundary layerKeywords: Land surface, Small scale processes, Boundary laye

Dutch dairy farmers' perspectives on culling reasons and strategies

Since the abolishment of the milk quota system in Europe in 2014 and the introduction of environmental policies such as the phosphate rights system in the Netherlands, the reasons for culling dairy cows might have changed. The aim of this study was to determine the culling reasons for dairy cattle and to identify farmers' culling strategies and their intentions regarding the alteration of indicated culling strategies. To this end, an online questionnaire was distributed among dairy farmers nationally that resulted in 207 responses. Results showed that the most frequent culling reasons were related to problems with reproduction, udder, and hoof health. Primiparous cows were primarily culled for miscellaneous reasons such as injury, reproduction failure, and low milk yield. Multiparous cows were culled predominantly for reproduction failure, udder health and hoof health reasons. Most respondents indicated that they consider formulating a culling strategy, based on certain rules of thumb regarding the most common reasons for culling. Most farmers also reported that culling decisions on their farms were perceived to be unavoidable, though reproductive culling decisions are primarily voluntary. Most respondents stated that they intended to reduce the culling rate for better economic gain did not intend to alter the amount of replacement stock reared. The applied rules of thumb regarding culling strategies do not seem to have changed since the policy changes in dairy farming. The question remains whether farmers' rules of thumb might have made them unaware of the actual economic consequences of their culling strategies under the altered situation

The International Urban Energy Balance Models Comparison Project: First Results from Phase 1

A large number of urban surface energy balance models now exist with different assumptions about the important features of the surface and exchange processes that need to be incorporated. To date, no com- parison of these models has been conducted; in contrast, models for natural surfaces have been compared extensively as part of the Project for Intercomparison of Land-surface Parameterization Schemes. Here, the methods and first results from an extensive international comparison of 33 models are presented. The aim of the comparison overall is to understand the complexity required to model energy and water exchanges in urban areas. The degree of complexity included in the models is outlined and impacts on model performance are discussed. During the comparison there have been significant developments in the models with resulting improvements in performance (root-mean-square error falling by up to two-thirds). Evaluation is based on a dataset containing net all-wave radiation, sensible heat, and latent heat flux observations for an industrial area in Vancouver, British Columbia, Canada. The aim of the comparison is twofold: to identify those modeling ap- proaches that minimize the errors in the simulated fluxes of the urban energy balance and to determine the degree of model complexity required for accurate simulations. There is evidence that some classes of models perform better for individual fluxes but no model performs best or worst for all fluxes. In general, the simpler models perform as well as the more complex models based on all statistical measures. Generally the schemes have best overall capability to model net all-wave radiation and least capability to model latent heat flux

Initial results from Phase 2 of the international urban energy balance model comparison

Urban land surface schemes have been developed to model the distinct features of the urban surface and the associated energy exchange processes. These models have been developed for a range of purposes and make different assumptions related to the inclusion and representation of the relevant processes. Here, the first results of Phase 2 from an international comparison project to evaluate 32 urban land surface schemes are presented. This is the first large-scale systematic evaluation of these models. In four stages, participants were given increasingly detailed information about an urban site for which urban fluxes were directly observed. At each stage, each group returned their models' calculated surface energy balance fluxes. Wide variations are evident in the performance of the models for individual fluxes. No individual model performs best for all fluxes. Providing additional information about the surface generally results in better performance. However, there is clear evidence that poor choice of parameter values can cause a large drop in performance for models that otherwise perform well. As many models do not perform well across all fluxes, there is need for caution in their application, and users should be aware of the implications for applications and decision making

Evaluation of the diurnal cycle in the atmospheric boundary layer over land as represented by a variety of single-column models: the second GABLS experiment

Postprint (published version