POTENTIAL USE OF THE E' CENTER AS AN INDICATOR OF INITIAL RESETTING IN TL/ESR DATING OF VOLCANIC MATERIALS

International audienceQuartz inclusions embedded in volcanic materials can be used for dattng Quaternary volcanoes by TL or ESR methods. For these techniques the initial zeroing by heat is assumed. However, this assumption can sometimes be questioned either because the temperature was not high, like in phreatomagmatic deposits, or because of contamination, like in thin tephra layers. Preliminary observations suggested that the présence of thé E' center could be an indicator of poor initial zeroing. This possibility was investigated in the present work. Quartz grains from various geological contexts were studied for comparison. Annealing and régénération of the E' center was explored

Intercomparisons of Red TL and ESR signals from heated quartz grains

Red thermoluminescence (TL) and electron-spin-resonance (ESR) measurements were made on identically prepared quartz grains, which had been zeroed by a lava flow of the Gravenoire volcano (Clermont-Ferrand, France) during the last glacial period (Wûrm glaciation). Samples from two different sites were studied. The additive technique was used in order to evaluate the palaeodoses and the corresponding dose response curves (DRC), approximating saturating exponentials, were fitted on the basis of DRC obtained with laboratory reset samples. Using this technique of regression, results derived from Al and Ti ESR signais and red TL signais converged better than when only the additive DRC were taken into account in a simple exponential fit. Annealing experiments indicated that the traps involved in red TL, Al and Ti ESR centres had different stabilities vs time and temperature; thus the agreement of the palaeodoses derived from the three signais, within error limits, strengthened confidence in the results for each sample. The ages obtained for the two sites agreed with each other, although the palaeodoses and natural radiation dose rates were significantly different: 62.2 + 9.0 and 61.3 +9.0 ka

Search for CP Violation in the Decay Z -> b (b bar) g

About three million hadronic decays of the Z collected by ALEPH in the years 1991-1994 are used to search for anomalous CP violation beyond the Standard Model in the decay Z -> b \bar{b} g. The study is performed by analyzing angular correlations between the two quarks and the gluon in three-jet events and by measuring the differential two-jet rate. No signal of CP violation is found. For the combinations of anomalous CP violating couplings, ${\hat{h}}_b = {\hat{h}}_{Ab}g_{Vb}-{\hat{h}}_{Vb}g_{Ab}$ and $h^{\ast}_b = \sqrt{\hat{h}_{Vb}^{2}+\hat{h}_{Ab}^{2}}$, limits of \hat{h}_b < 0.59$and$h^{\ast}_{b} < 3.02$ are given at 95\% CL.Comment: 8 pages, 1 postscript figure, uses here.sty, epsfig.st

Search for the glueball candidates f0(1500) and fJ(1710) in gamma gamma collisions

Data taken with the ALEPH detector at LEP1 have been used to search for gamma gamma production of the glueball candidates f0(1500) and fJ(1710) via their decay to pi+pi-. No signal is observed and upper limits to the product of gamma gamma width and pi+pi- branching ratio of the f0(1500) and the fJ(1710) have been measured to be Gamma_(gamma gamma -> f0(1500)). BR(f0(1500)->pi+pi-) < 0.31 keV and Gamma_(gamma gamma -> fJ(1710)). BR(fJ(1710)->pi+pi-) < 0.55 keV at 95% confidence level.Comment: 10 pages, 3 figure

Search for supersymmetry with a dominant R-parity violating LQDbar couplings in e+e- collisions at centre-of-mass energies of 130GeV to 172 GeV

A search for pair-production of supersymmetric particles under the assumption that R-parity is violated via a dominant LQDbar coupling has been performed using the data collected by ALEPH at centre-of-mass energies of 130-172 GeV. The observed candidate events in the data are in agreement with the Standard Model expectation. This result is translated into lower limits on the masses of charginos, neutralinos, sleptons, sneutrinos and squarks. For instance, for m_0=500 GeV/c^2 and tan(beta)=sqrt(2) charginos with masses smaller than 81 GeV/c^2 and neutralinos with masses smaller than 29 GeV/c^2 are excluded at the 95% confidence level for any generation structure of the LQDbar coupling.Comment: 32 pages, 30 figure

Measurement of the tau lepton lifetime with the three-dimensional impact parameter method.

A new method is presented for the measurement of the mean $\tau$ lepton lifetime using events in which $\tau$'s are pair-produced and both $\tau$'s decay to hadrons and $\nu_\tau$. Based on the correlation between the two $\tau$'s produced at a symmetric $e^+ e^-$ collider, the 3DIP method relies on the three-dimensional information from a double-sided vertex detector and on kinematic constraints for the precise measurement of the $\tau$ decay angles. Using the data collected from 1992 to 1994 with the ALEPH detector at LEP, a $\tau$ lifetime of $288.0 \pm 3.1 \pm 1.3$\fs is obtained from the sample in which both $\tau$'s decay to one charged track, and $292.8 \pm 5.6 \pm 3.0$\fs from the sample in which one $\tau$ decays to one prong and the other to three prongs. The results show small statistical correlations with those derived from other methods. When combined with the previously published ALEPH measurements, the resulting $\tau$ lifetime is $291.2 \pm 2.0 \pm 1.2$\fs

Measurement of the tau lepton lifetime with the three-dimensional impact parameter method.

A new method is presented for the measurement of the mean $\tau$ lepton lifetime using events in which $\tau$'s are pair-produced and both $\tau$'s decay to hadrons and $\nu_\tau$. Based on the correlation between the two $\tau$'s produced at a symmetric $e^+ e^-$ collider, the 3DIP method relies on the three-dimensional information from a double-sided vertex detector and on kinematic constraints for the precise measurement of the $\tau$ decay angles. Using the data collected from 1992 to 1994 with the ALEPH detector at LEP, a $\tau$ lifetime of $288.0 \pm 3.1 \pm 1.3$\fs is obtained from the sample in which both $\tau$'s decay to one charged track, and $292.8 \pm 5.6 \pm 3.0$\fs from the sample in which one $\tau$ decays to one prong and the other to three prongs. The results show small statistical correlations with those derived from other methods. When combined with the previously published ALEPH measurements, the resulting $\tau$ lifetime is $291.2 \pm 2.0 \pm 1.2$\fs

Measurement of the tau lepton lifetime with the three-dimensional impact parameter method.

A new method is presented for the measurement of the mean $\tau$ lepton lifetime using events in which $\tau$'s are pair-produced and both $\tau$'s decay to hadrons and $\nu_\tau$. Based on the correlation between the two $\tau$'s produced at a symmetric $e^+ e^-$ collider, the 3DIP method relies on the three-dimensional information from a double-sided vertex detector and on kinematic constraints for the precise measurement of the $\tau$ decay angles. Using the data collected from 1992 to 1994 with the ALEPH detector at LEP, a $\tau$ lifetime of $288.0 \pm 3.1 \pm 1.3$\fs is obtained from the sample in which both $\tau$'s decay to one charged track, and $292.8 \pm 5.6 \pm 3.0$\fs from the sample in which one $\tau$ decays to one prong and the other to three prongs. The results show small statistical correlations with those derived from other methods. When combined with the previously published ALEPH measurements, the resulting $\tau$ lifetime is $291.2 \pm 2.0 \pm 1.2$\fs

Production of excited beauty states in Z decays

A data sample of about 3.0 million hadronic Z decays collected by the ALEPH experiment at LEP in the years 1991 through 1994, is used to make an inclusive selection of B~hadron events. In this event sample 4227 \pm 140 \pm 252 B^* mesons in the decay B^* \to B \gamma and 1944 \pm 108 \pm 161 B^{**} mesons decaying into a B~meson and a charged pion are reconstructed. For the well established B^* meson the following quantities areobtained: \Delta M = M_{B^*} - M_{B} = (45.30\pm 0.35\pm 0.87)~\mathrm{MeV}/c^2 and N_{B^*}/(N_B+N_{B^*}) = (77.1 \pm 2.6 \pm 7.0)\%. The angular distribution of the photons in the B^* rest frame is used to measure the relative contribution of longitudinal B^* polarization states to be \sigma_L/(\sigma_L + \sigma_T)= (33 \pm 6 \pm 5)\%. \\ Resonance structure in the M(B\pi)-M(B) mass difference is observed at (424 \pm 4 \pm 10)~\mathrm{MeV}/c^2. Its shape and position is in agreement with the expectation for B^{**}_{u,d} states decaying into B_{u,d}^{(*)} \pi^\pm. The signal is therefore interpreted as arising from them. The relative production rate is determined to be \frac{BR(Z \to b \to B_{u,d}^{**})}{BR(Z \to b \to B_{u,d})} = [27.9 \pm 1.6(stat) \pm 5.9(syst) \phantom{a}^{+3.9}_{-5.6}(model)]\%. where the third error reflects the uncertainty due to different production and decay models for the broad B_{u,d}^{**} states