144 research outputs found
Catalytic steam gasification of biomass for a sustainable hydrogen future: influence of catalyst composition
Hydrogen is regarded as a clean energy for fuelling the future. Hydrogen will be the energy carrier from other resources such as hydropower, wind, solar and biomass. Producing hydrogen from gasification of biomass wastes, particularly in the presence of steam, represents a promising route to produce this clean and CO2-neutral fuel. The steam pyrolysis-gasification ofbiomass (wood sawdust) was carried out with various nickel-based catalysts for hydrogen production in a two-stage fixed bed reaction system. The wood sawdust was pyrolysed in the first reactor and the derived products were gasified in the second reactor in the presence of the catalyst and steam. The synthesised Ni-Ca-Al and Ni-Zn-Al catalysts were preparedbyco-precipitation method with different Ni loadings of 20 mol% and various Zn/Al or Ca/Al ratios, which were characterized with scanning electron microscopy (SEM), transmission electron microscopy (TEM) and temperature-programmed oxidation (TPO). The results showed that the Ni/Zn-Al (1:9) catalyst resulted in higher hydrogenproduction(23.9 mmol H2 g-1biomass)compared with the Ni/Ca-Al (1:9) catalyst (12.7 23.9 mmol H2 g-1 biomass) and in addition, the increase of Ca or Zn content in the catalyst slightly increased the hydrogen production. The TPO results showed that the catalyst suffered negligible coke deposition from the catalytic steam pyrolysis/gasification of wood sawdust. Additionally, Na2CO3 basic solution was also found toproduce a catalyst with better performance and lower coke deposition, compared with NH4OH catalyst preparation agent, as observed by TPO, SEM and TEM analysis
Catalysts based on Co-Birnessite and Co-Todorokite for the efficient production of hydrogen by ethanol steam reforming
[EN] Two structured manganese oxides (Birnessite and Todorokite) containing Co have been studied in the steam reforming of ethanol. It has been found that both materials are active in the hydrogen production, exhibiting high values of conversion of ethanol and selectivities to hydrogen (100% and 70%, respectively). The best results have been obtained with the catalyst based on Todorokite material. Characterization by DRX, BET area, TPR and TEM has allowed to find that the excellent performance exhibited by this material could be attributed to the lower size of the Co metallic particles present in this sample (6 nm vs 12 nm in Birnessite). This lower size could be related to the especial microporous structure of Todorokite precursor, which could provide high-quality positions for the stabilization of the Co metal particles during calcination and reduction steps. Catalytic deactivation has also been considered. Deactivation was found higher for Todorokite-based catalyst, which presented the largest amount of deposited carbon (26.2 wt% for Co-TOD vs 10.6 wt% for Co-BIR). On the other hand, the degree of metal sintering was found similar in both catalysts. Therefore, the deactivation of the catalysts has been attributed primarily to the deposition of coke. The results presented here show that it is possible to prepare new catalysts based on manganese oxides with Birnessite and Todorokite structure and promoted with Co with high catalytic performance in the steam reforming of ethanol. (C) 2017 Hydrogen Energy Publications LLC. Published by Elsevier Ltd. All rights reserved.The doctor Javier Francisco Da Costa Serra acknowledges the CSIC for granted the scholarship predoctoral-JAE-CSIC. Moreover, Electronic Microscopy Service of UPV for TEM images.Da Costa Serra, JF.; Chica, A. (2018). Catalysts based on Co-Birnessite and Co-Todorokite for the efficient production of hydrogen by ethanol steam reforming. International Journal of Hydrogen Energy. 43(35):16859-16865. https://doi.org/10.1016/j.ijhydene.2017.12.114S1685916865433
New Catalysts based on Ni-Birnessite and Ni-Todorokite for the Efficient Production of Hydrogen by Bioethanol Steam Reforming
Catalytic steam reforming of bioethanol seems to be a promise option to produce renewable hydrogen; however
efficient catalysts are still under development. Recently, manganese oxide based materials (MO) are the subject of
intense research as low cost, efficient, and environmentally friendly catalysts. Among them MO with layer and tunnel
structure have received significant attention due to their excellent catalytic activity. Specifically, we have explored
the catalytic performance of two MO containing Ni (Birnessite and Todorokite). We find that both materials are
highly active and selective to produce hydrogen by steam reforming of bioethanol. Their characterization by DRX,
BET area, TPR, and TEM, has allowed to find that the excellent performance exhibited by these materials could be
attributed to the especial structure of these MO, which would provide high-quality positions for the stabilization of
the Ni metal particles.Fuertes, A.; Da Costa Serra, JF.; Chica, A. (2012). New Catalysts based on Ni-Birnessite and Ni-Todorokite for the Efficient Production of Hydrogen by Bioethanol Steam Reforming. Energy Procedia. 29:181-191. doi:10.1016/j.egypro.2012.09.023S1811912
- …