Comparing and characterizing some constructions of canonical bases from Coxeter systems

The Iwahori-Hecke algebra $\mathcal{H}$ of a Coxeter system $(W,S)$ has a "standard basis" indexed by the elements of $W$ and a "bar involution" given by a certain antilinear map. Together, these form an example of what Webster calls a pre-canonical structure, relative to which the well-known Kazhdan-Lusztig basis of $\mathcal{H}$ is a canonical basis. Lusztig and Vogan have defined a representation of a modified Iwahori-Hecke algebra on the free $\mathbb{Z}[v,v^{-1}]$-module generated by the set of twisted involutions in $W$, and shown that this module has a unique pre-canonical structure satisfying a certain compatibility condition, which admits its own canonical basis which can be viewed as a generalization of the Kazhdan-Lusztig basis. One can modify the parameters defining Lusztig and Vogan's module to obtain other pre-canonical structures, each of which admits a unique canonical basis indexed by twisted involutions. We classify all of the pre-canonical structures which arise in this fashion, and explain the relationships between their resulting canonical bases. While some of these canonical bases are related in a trivial fashion to Lusztig and Vogan's construction, others appear to have no simple relation to what has been previously studied. Along the way, we also clarify the differences between Webster's notion of a canonical basis and the related concepts of an IC basis and a $P$-kernel.Comment: 32 pages; v2: additional discussion of relationship between canonical bases, IC bases, and P-kernels; v3: minor revisions; v4: a few corrections and updated references, final versio

Lightside Atmospheric Revitalization System

The system was studied as a replacement to the present baseline LiOH system for extended duration shuttle missions. The system consists of three subsystems: a solid amine water desorbed regenerable carbon dioxide removal system, a water vapor electrolysis oxygen generating system, and a Sabatier reactor carbon dioxide reduction system. The system is designed for use on a solar powered shuttle vehicle. The majority of the system's power requirements are utilized on the Sun side of each orbit, when solar power is available

Where Are the Baryons? II: Feedback Effects

Numerical simulations of the intergalactic medium have shown that at the present epoch a significant fraction (40-50%) of the baryonic component should be found in the (T~10^6K) Warm-Hot Intergalactic Medium (WHIM) - with several recent observational lines of evidence indicating the validity of the prediction. We here recompute the evolution of the WHIM with the following major improvements: (1) galactic superwind feedback processes from galaxy/star formation are explicitly included; (2) major metal species (O V to O IX) are computed explicitly in a non-equilibrium way; (3) mass and spatial dynamic ranges are larger by a factor of 8 and 2, respectively, than in our previous simulations. Here are the major findings: (1) galactic superwinds have dramatic effects, increasing the WHIM mass fraction by about 20%, primarily through heating up warm gas near galaxies with density 10^{1.5}-10^4 times the mean density. (2) the fraction of baryons in WHIM is increased modestly from the earlier work but is ~40-50%. (3) the gas density of the WHIM is broadly peaked at a density 10-20 times the mean density, ranging from underdense regions to regions that are overdense by 10^3-10^4. (4) the median metallicity of the WHIM is 0.18 Zsun for oxygen with 50% and 90% intervals being (0.040,0.38) and (0.0017,0.83).Comment: 44 pages, 17 figures, high res version at http://www.astro.princeton.edu/~cen/baryonII.ps.g

Electronic structure and chemical bonding of nc-TiC/a-C nanocomposites

The electronic structure of nanocrystalline (nc-) TiC/amorphous C nanocomposites has been investigated by soft x-ray absorption and emission spectroscopy. The measured spectra at the Ti 2p and C 1s thresholds of the nanocomposites are compared to those of Ti metal and amorphous C. The corresponding intensities of the electronic states for the valence and conduction bands in the nanocomposites are shown to strongly depend on the TiC carbide grain size. An increased charge-transfer between the Ti 3d-eg states and the C 2p states has been identified as the grain size decreases, causing an increased ionicity of the TiC nanocrystallites. It is suggested that the charge-transfer occurs at the interface between the nanocrystalline TiC and the amorphous C matrix and represents an interface bonding which may be essential for the understanding of the properties of nc-TiC/amorphous C and similar nanocomposites.Comment: 13 pages, 6 figures, 1 table; http://link.aps.org/doi/10.1103/PhysRevB.80.23510

Phase composition and transformations in magnetron-sputtered (Al,V)2O3 coatings

Coatings of (Al1-xVx)2O3, with x ranging from 0 to 1, were deposited by pulsed DC reactive sputter deposition on Si(100) at a temperature of 550 {\deg}C. XRD showed three different crystal structures depending on V-metal fraction in the coating: {\alpha}-V2O3 rhombohedral structure for 100 at.% V, a defect spinel structure for the intermediate region, 63 - 42 at.% V. At lower V-content, 18 and 7 at.%, a gamma-alumina-like solid solution was observed, shifted to larger d-spacing compared to pure {\gamma}-Al2O3. The microstructure changes from large columnar faceted grains for {\alpha}-V2O3 to smaller equiaxed grains when lowering the vanadium content toward pure {\gamma}-Al2O3. Annealing in air resulted in formation of V2O5 crystals on the surface of the coating after annealing to 500 {\deg}C for 42 at.% V and 700 {\deg}C for 18 at.% V metal fraction respectively. The highest thermal stability was shown for pure {\gamma}-Al2O3-coating, which transformed to {\alpha}-Al2O3 after annealing to 1100{\deg} C. Highest hardness was observed for the Al-rich oxides, ~24 GPa. The latter decreased with increasing V-content, larger than 7 at.% V metal fraction. The measured hardness after annealing in air decreased in conjunction with the onset of further oxidation of the coatings

A 10B-based neutron detector with stacked Multiwire Proportional Counters and macrostructured cathodes

We present the results of the measurements of the detection efficiency for a 4.7 \r{A} neutron beam incident upon a detector incorporating a stack of up to five MultiWire Proportional Counters (MWPC) with Boron-coated cathodes. The cathodes were made of Aluminum and had a surface exhibiting millimeter-deep V-shaped grooves of 45{\deg}, upon which the thin Boron film was deposited by DC magnetron sputtering. The incident neutrons interacting with the converter layer deposited on the sidewalls of the grooves have a higher capture probability, owing to the larger effective absorption film thickness. This leads to a higher overall detection efficiency for the grooved cathode when compared to a cathode with a flat surface. Both the experimental results and the predictions of the GEANT4 model suggests that a 5-counter detector stack with coated grooved cathodes has the same efficiency as a 7-counter stack with flat cathodes. The reduction in the number of counters in the stack without altering the detection efficiency will prove highly beneficial for large-area position-sensitive detectors for neutron scattering applications, for which the cost-effective manufacturing of the detector and associated readout electronics is an important objective. The proposed detector concept could be a technological option for one of the new chopper spectrometers and other instruments planned to be built at the future European Spallation Source in Sweden. These results with macrostructured cathodes generally apply not just to MWPCs but to other gaseous detectors as well.Comment: 14 pages, 9 figure

Entrepreneurial Orientation as the Determinant of Entrepreneurial Marketing Behaviors

Although entrepreneurial marketing (EM) behaviors are widely reported, there is little discussion on what determines the level of a firm’s behaviors. This study contributes to the knowledge in the fields of entrepreneurship and entrepreneurial marketing by proposing EO, entrepreneurial orientation, as an antecedent of EM behaviors and arguing that EO acts as a multidimensional construct when affecting EM behaviors. The relationships between EO and EM behaviors are empirically investigated using multi-group confirmatory factor analysis and structural equation modeling techniques. Results from the analyses support the hypothesis that EM behaviors are driven by EO. Firms with a higher level of EO engaged in EM behaviors more than firms with a lower level of EO. At the dimension level, innovativeness, proactiveness, and risk-taking are found to independently affect EM behaviors. With innovativeness having the strongest impact, this study concludes that innovativeness is the leading essence of EM behaviors. The results support a new consensus among entrepreneurship research scholars who suggest a direction toward multidimensional EO.

Wind Signatures In The X-Ray Emission-Line Profiles Of The Late-O Supergiant Zeta Orionis

X-ray line-profile analysis has proved to be the most direct diagnostic of the kinematics and spatial distribution of the very hot plasma around O stars. The Doppler-broadened line profiles provide information about the velocity distribution of the hot plasma, while the wavelength-dependent attenuation across a line profile provides information about the absorption to the hot plasma, thus providing a strong constraint on its physical location. In this paper, we apply several analysis techniques to the emission lines in the Chandra High Energy Transmission Grating Spectrometer (HETGS) spectrum of the late-O supergiant zeta Ori (O9.7 Ib), including the fitting of a simple line-profile model. We show that there is distinct evidence for blueshifts and profile asymmetry, as well as broadening in the X-ray emission lines of zeta Ori. These are the observational hallmarks of a wind-shock X-ray source, and the results for zeta Ori are very similar to those for the earlier O star, zeta Pup, which we have previously shown to be well fit by the same wind-shock line-profile model. The more subtle effects on the line-profile morphologies in zeta Ori, as compared to zeta Pup, are consistent with the somewhat lower density wind in this later O supergiant. In both stars, the wind optical depths required to explain the mildly asymmetric X-ray line profiles imply reductions in the effective opacity of nearly an order of magnitude, which may be explained by some combination of mass-loss rate reduction and large-scale clumping, with its associated porosity-based effects on radiation transfer. In the context of the recent reanalysis of the helium-like line intensity ratios in both zeta Ori and zeta Pup, and also in light of recent work questioning the published mass-loss rates in OB stars, these new results indicate that the X-ray emission from zeta Ori can be understood within the framework of the standard wind-shock scenario for hot stars

Optimal Pacing for Running 400 m and 800 m Track Races

Physicists seeking to understand complex biological systems often find it rewarding to create simple "toy models" that reproduce system behavior. Here a toy model is used to understand a puzzling phenomenon from the sport of track and field. Races are almost always won, and records set, in 400 m and 800 m running events by people who run the first half of the race faster than the second half, which is not true of shorter races, nor of longer. There is general agreement that performance in the 400 m and 800 m is limited somehow by the amount of anaerobic metabolism that can be tolerated in the working muscles in the legs. A toy model of anaerobic metabolism is presented, from which an optimal pacing strategy is analytically calculated via the Euler-Lagrange equation. This optimal strategy is then modified to account for the fact that the runner starts the race from rest; this modification is shown to result in the best possible outcome by use of an elementary variational technique that supplements what is found in undergraduate textbooks. The toy model reproduces the pacing strategies of elite 400 m and 800 m runners better than existing models do. The toy model also gives some insight into training strategies that improve performance.Comment: 14 pages, 4 figures, submitted to the American Journal of Physic