An Application of Monte-Carlo-Based Sensitivity Analysis on the Overlap in Discriminant Analysis

Discriminant analysis (DA) is used for the measurement of estimates of a discriminant function by minimizing their group misclassifications to predict group membership of newly sampled data. A major source of misclassification in DA is due to the overlapping of groups. The uncertainty in the input variables and model parameters needs to be properly characterized in decision making. This study combines DEA-DA with a sensitivity analysis approach to an assessment of the influence of banks’ variables on the overall variance in overlap in a DA in order to determine which variables are most significant. A Monte-Carlo-based sensitivity analysis is considered for computing the set of first-order sensitivity indices of the variables to estimate the contribution of each uncertain variable. The results show that the uncertainties in the loans granted and different deposit variables are more significant than uncertainties in other banks’ variables in decision making

Water quality index development using fuzzy logic: A case study of the Karoon River of Iran

Determination of the status of water quality of a river or any other water source is highly indeterminate. It is necessary to have a competent model to predict the status of water quality and to show the type of water treatment that would be used to meet different demands. By exploring the behavior and limitations of conventional methods for quality evaluation, a better overall index for water quality in Iran and its application in Karoon River is proposed. Six variables are employed for the quality assessment. Numerical scales relating to the degree of quality are established for each variable to assess variations in quality and to convey findings in a comprehensive manner. The unit operates in a fuzzy logic mode including a fuzzification engine receiving a plurality of input variables on its input and being adapted to compute membership function parameters. A processor engine connected downstream of the fuzzification unit will produce fuzzy set, based on fuzzy variable namely dissolved oxygen (DO), total dissolved solids (TDS), turbidity, nitrate, fecal coliform and pH. It has a defuzzification unit which operates to translate the inference results into a discrete crisp value of water quality index. The development of the fuzzy model with one river system is explained in this paper. Water quality index in most countries is only referring to physico-chemical parameters due to great efforts needed to quantify the biological parameters. This study ensures a better method to include special parameters into water quality index due to superior capabilities of fuzzy logic in dealing with non-linear, complex and uncertain systems.Key words: Water quality index, fuzzification, monitoring, inference system

Modified Nonradial Supper Efficiency Models

Ranking Efficient Decision Making Units (DMUs) are an important issue in Data Envelopment Analysis (DEA). This is one of the main areas for the researcher. Different methods for this purpose have been suggested. Appearing nonzero slack in optimal solution makes the method problematic. In this paper, we modify the nonradial supper efficiency model to remove this difficulty. Some numerical examples are solved by modified model

A New Method for Defuzzification and Ranking of Fuzzy Numbers Based on the Statistical Beta Distribution

Granular computing is an emerging computing theory and paradigm that deals with the processing of information granules, which are defined as a number of information entities grouped together due to their similarity, physical adjacency, or indistinguishability. In most aspects of human reasoning, these granules have an uncertain formation, so the concept of granularity of fuzzy information could be of special interest for the applications where fuzzy sets must be converted to crisp sets to avoid uncertainty. This paper proposes a novel method of defuzzification based on the mean value of statistical Beta distribution and an algorithm for ranking fuzzy numbers based on the crisp number ranking system on R. The proposed method is quite easy to use, but the main reason for following this approach is the equality of left spread, right spread, and mode of Beta distribution with their corresponding values in fuzzy numbers within (0,1) interval, in addition to the fact that the resulting method can satisfy all reasonable properties of fuzzy quantity ordering defined by Wang et al. The algorithm is illustrated through several numerical examples and it is then compared with some of the other methods provided by literature

Using Enhanced Russell Model to Solve Inverse Data Envelopment Analysis Problems

This paper studies the inverse data envelopment analysis using the nonradial enhanced Russell model. Necessary and sufficient conditions for inputs/outputs determination are introduced based on Pareto solutions of multiple-objective linear programming. In addition, an approach is investigated to identify extra input/lack output in each of input/output components (maximum/minimum reduction/increase amounts in each a of input/output components). In addition, the following question is addressed: if among a group of DMUs, it is required to increase inputs and outputs to a particular unit and assume that the DMU maintains its current efficiency level with respect to other DMUs, how much should the inputs and outputs of the DMU increase? This question is discussed as inverse data envelopment analysis problems, and a technique is suggested to answer this question. Necessary and sufficient conditions are established by employing Pareto solutions of multiple-objective linear programming as well

Generalized Super Efficiency Model for Ranking Efficient Decision Making Units in Data Envelopment Analysis

Abstract: In evaluating decision making units (DMU's) by using Data Envelopment Analysis (DEA) technique, we encounter the situation in which more than one unit takes efficiency score of one. In such a case, some criteria should be considered to rank the DMU's. Some efficient techniques such as AP, MAJ,etc may be used in this way. For some sets of data, with special structure in models that above mentioned, may be infeasible and unstable. In this paper, a new model is developed that all the existing drawbacks of previously applied models remove. Some numerical examples are put forward

The global burden of cancer attributable to risk factors, 2010-19 : a systematic analysis for the Global Burden of Disease Study 2019

Background Understanding the magnitude of cancer burden attributable to potentially modifiable risk factors is crucial for development of effective prevention and mitigation strategies. We analysed results from the Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2019 to inform cancer control planning efforts globally. Methods The GBD 2019 comparative risk assessment framework was used to estimate cancer burden attributable to behavioural, environmental and occupational, and metabolic risk factors. A total of 82 risk-outcome pairs were included on the basis of the World Cancer Research Fund criteria. Estimated cancer deaths and disability-adjusted life-years (DALYs) in 2019 and change in these measures between 2010 and 2019 are presented. Findings Globally, in 2019, the risk factors included in this analysis accounted for 4.45 million (95% uncertainty interval 4.01-4.94) deaths and 105 million (95.0-116) DALYs for both sexes combined, representing 44.4% (41.3-48.4) of all cancer deaths and 42.0% (39.1-45.6) of all DALYs. There were 2.88 million (2.60-3.18) risk-attributable cancer deaths in males (50.6% [47.8-54.1] of all male cancer deaths) and 1.58 million (1.36-1.84) risk-attributable cancer deaths in females (36.3% [32.5-41.3] of all female cancer deaths). The leading risk factors at the most detailed level globally for risk-attributable cancer deaths and DALYs in 2019 for both sexes combined were smoking, followed by alcohol use and high BMI. Risk-attributable cancer burden varied by world region and Socio-demographic Index (SDI), with smoking, unsafe sex, and alcohol use being the three leading risk factors for risk-attributable cancer DALYs in low SDI locations in 2019, whereas DALYs in high SDI locations mirrored the top three global risk factor rankings. From 2010 to 2019, global risk-attributable cancer deaths increased by 20.4% (12.6-28.4) and DALYs by 16.8% (8.8-25.0), with the greatest percentage increase in metabolic risks (34.7% [27.9-42.8] and 33.3% [25.8-42.0]). Interpretation The leading risk factors contributing to global cancer burden in 2019 were behavioural, whereas metabolic risk factors saw the largest increases between 2010 and 2019. Reducing exposure to these modifiable risk factors would decrease cancer mortality and DALY rates worldwide, and policies should be tailored appropriately to local cancer risk factor burden. Copyright (C) 2022 The Author(s). Published by Elsevier Ltd. This is an Open Access article under the CC BY 4.0 license.Peer reviewe

Global age-sex-specific mortality, life expectancy, and population estimates in 204 countries and territories and 811 subnational locations, 1950–2021, and the impact of the COVID-19 pandemic: a comprehensive demographic analysis for the Global Burden of Disease Study 2021

Background: Estimates of demographic metrics are crucial to assess levels and trends of population health outcomes. The profound impact of the COVID-19 pandemic on populations worldwide has underscored the need for timely estimates to understand this unprecedented event within the context of long-term population health trends. The Global Burden of Diseases, Injuries, and Risk Factors Study (GBD) 2021 provides new demographic estimates for 204 countries and territories and 811 additional subnational locations from 1950 to 2021, with a particular emphasis on changes in mortality and life expectancy that occurred during the 2020–21 COVID-19 pandemic period. Methods: 22 223 data sources from vital registration, sample registration, surveys, censuses, and other sources were used to estimate mortality, with a subset of these sources used exclusively to estimate excess mortality due to the COVID-19 pandemic. 2026 data sources were used for population estimation. Additional sources were used to estimate migration; the effects of the HIV epidemic; and demographic discontinuities due to conflicts, famines, natural disasters, and pandemics, which are used as inputs for estimating mortality and population. Spatiotemporal Gaussian process regression (ST-GPR) was used to generate under-5 mortality rates, which synthesised 30 763 location-years of vital registration and sample registration data, 1365 surveys and censuses, and 80 other sources. ST-GPR was also used to estimate adult mortality (between ages 15 and 59 years) based on information from 31 642 location-years of vital registration and sample registration data, 355 surveys and censuses, and 24 other sources. Estimates of child and adult mortality rates were then used to generate life tables with a relational model life table system. For countries with large HIV epidemics, life tables were adjusted using independent estimates of HIV-specific mortality generated via an epidemiological analysis of HIV prevalence surveys, antenatal clinic serosurveillance, and other data sources. Excess mortality due to the COVID-19 pandemic in 2020 and 2021 was determined by subtracting observed all-cause mortality (adjusted for late registration and mortality anomalies) from the mortality expected in the absence of the pandemic. Expected mortality was calculated based on historical trends using an ensemble of models. In location-years where all-cause mortality data were unavailable, we estimated excess mortality rates using a regression model with covariates pertaining to the pandemic. Population size was computed using a Bayesian hierarchical cohort component model. Life expectancy was calculated using age-specific mortality rates and standard demographic methods. Uncertainty intervals (UIs) were calculated for every metric using the 25th and 975th ordered values from a 1000-draw posterior distribution. Findings: Global all-cause mortality followed two distinct patterns over the study period: age-standardised mortality rates declined between 1950 and 2019 (a 62·8% [95% UI 60·5–65·1] decline), and increased during the COVID-19 pandemic period (2020–21; 5·1% [0·9–9·6] increase). In contrast with the overall reverse in mortality trends during the pandemic period, child mortality continued to decline, with 4·66 million (3·98–5·50) global deaths in children younger than 5 years in 2021 compared with 5·21 million (4·50–6·01) in 2019. An estimated 131 million (126–137) people died globally from all causes in 2020 and 2021 combined, of which 15·9 million (14·7–17·2) were due to the COVID-19 pandemic (measured by excess mortality, which includes deaths directly due to SARS-CoV-2 infection and those indirectly due to other social, economic, or behavioural changes associated with the pandemic). Excess mortality rates exceeded 150 deaths per 100 000 population during at least one year of the pandemic in 80 countries and territories, whereas 20 nations had a negative excess mortality rate in 2020 or 2021, indicating that all-cause mortality in these countries was lower during the pandemic than expected based on historical trends. Between 1950 and 2021, global life expectancy at birth increased by 22·7 years (20·8–24·8), from 49·0 years (46·7–51·3) to 71·7 years (70·9–72·5). Global life expectancy at birth declined by 1·6 years (1·0–2·2) between 2019 and 2021, reversing historical trends. An increase in life expectancy was only observed in 32 (15·7%) of 204 countries and territories between 2019 and 2021. The global population reached 7·89 billion (7·67–8·13) people in 2021, by which time 56 of 204 countries and territories had peaked and subsequently populations have declined. The largest proportion of population growth between 2020 and 2021 was in sub-Saharan Africa (39·5% [28·4–52·7]) and south Asia (26·3% [9·0–44·7]). From 2000 to 2021, the ratio of the population aged 65 years and older to the population aged younger than 15 years increased in 188 (92·2%) of 204 nations. Interpretation: Global adult mortality rates markedly increased during the COVID-19 pandemic in 2020 and 2021, reversing past decreasing trends, while child mortality rates continued to decline, albeit more slowly than in earlier years. Although COVID-19 had a substantial impact on many demographic indicators during the first 2 years of the pandemic, overall global health progress over the 72 years evaluated has been profound, with considerable improvements in mortality and life expectancy. Additionally, we observed a deceleration of global population growth since 2017, despite steady or increasing growth in lower-income countries, combined with a continued global shift of population age structures towards older ages. These demographic changes will likely present future challenges to health systems, economies, and societies. The comprehensive demographic estimates reported here will enable researchers, policy makers, health practitioners, and other key stakeholders to better understand and address the profound changes that have occurred in the global health landscape following the first 2 years of the COVID-19 pandemic, and longer-term trends beyond the pandemic