Galectin-3 interacts with components of the nuclear ribonucleoprotein complex

Differentially spliced mRNAs following galectin‐3 depletion. (PDF 122 kb

Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes

Fluoroethylene carbonate (FEC) and vinylene carbonate (VC) are the most frequently used electrolyte components to enhance the lifetime of anode materials in Li-ion batteries, but for silicon it is still ambiguous when FEC or VC is more beneficial. Herein, a nanostructured silicon/carbon anode derived from low-cost HSiCl3 is tailored by the rational choice of the electrolyte component, to obtain an anode material outperforming current complex silicon structures. We demonstrate highly reversible areal capacities of up to 5 mA h/cm2 at 4.4 mg/cm2 mass loading, a specific capacity of 1280 mA h/gElectrode, a capacity retention of 81% after 500 deep-discharge cycles versus lithium metal and successful full-cell tests with high-voltage cathodes meeting the requirements for real application. Electrochemical impedance spectroscopy and post-mortem investigation provide new insights in tailoring the interfacial properties of silicon-based anodes for high performance anode materials based on an alloying mechanism with large volume changes. The role of fluorine in the FEC-derived interfacial layer is discussed in comparison with the VC-derived layer and possible degradation mechanisms are proposed. We believe that this study gives a valuable understanding and provides new strategies on the facile use of additives for highly reversible silicon anodes in Li-ion batteries.Fil: Jaumann, Tony. Ifw Dresden; AlemaniaFil: Balach, Juan Manuel. Ifw Dresden; AlemaniaFil: Langklotz, Ulrike. Technische Universität Dresden; AlemaniaFil: Sauchuk, Viktar. Fraunhofer Institute for Ceramic Materials and Systems; AlemaniaFil: Fritsch, Marco. Fraunhofer Institute for Ceramic Materials and Systems; AlemaniaFil: Michaelis, Alexander. Technische Universität Dresden; AlemaniaFil: Teltevskij, Valerij. Leibniz Institute for Solid State and Materials Research; AlemaniaFil: Mikhailova, Daria. Leibniz Institute for Solid State and Materials Research; AlemaniaFil: Oswald, Steffen. Leibniz Institute for Solid State and Materials Research; AlemaniaFil: Klose, Markus. Leibniz Institute for Solid State and Materials Research; Alemania. Technische Universität Dresden; AlemaniaFil: Stephani, Guenter. Branch Lab Dresden. Fraunhofer Institute for Manufacturing Technology and Advanced Materials; ArgentinaFil: Hauser, Ralf. Branch Lab Dresden. Fraunhofer Institute for Manufacturing Technology and Advanced Materials; ArgentinaFil: Eckert, Jürgen. Technische Universität Dresden; Alemania. Leibniz Institute for Solid State and Materials Research; AlemaniaFil: Giebeler, Lars. Leibniz Institute for Solid State and Materials Research; Alemania. Technische Universität Dresden; Alemani

Lightweight polymer-carbon composite current collector for lithium-ion batteries

A hermetic dense polymer-carbon composite-based current collector foil (PCCF) for lithium-ion battery applications was developed and evaluated in comparison to state-of-the-art aluminum (Al) foil collector. Water-processed LiNi0.5Mn1.5O4 (LMNO) cathode and Li4Ti5O12 (LTO) anode coatings with the integration of a thin carbon primer at the interface to the collector were prepared. Despite the fact that the laboratory manufactured PCCF shows a much higher film thickness of 55 µm compared to Al foil of 19 µm, the electrode resistance was measured to be by a factor of 5 lower compared to the Al collector, which was attributed to the low contact resistance between PCCF, carbon primer and electrode microstructure. The PCCF-C-primer collector shows a sufficient voltage stability up to 5 V vs. Li/Li+ and a negligible Li-intercalation loss into the carbon primer. Electrochemical cell tests demonstrate the applicability of the developed PCCF for LMNO and LTO electrodes, with no disadvantage compared to state-of-the-art Al collector. Due to a 50% lower material density, the lightweight and hermetic dense PCCF polymer collector offers the possibility to significantly decrease the mass loading of the collector in battery cells, which can be of special interest for bipolar battery architectures. © 2020 by the authors. Licensee MDPI, Basel, Switzerland

Polarized structure functions in a constituent quark scenario

Using a simple picture of the constituent quark as a composite system of point-like partons, we construct the polarized parton distributions by a convolution between constituent quark momentum distributions and constituent quark structure functions. Using unpolarized data to fix the parameters we achieve good agreement with the polarization experiments for the proton, while not so for the neutron. By relaxing our assumptions for the sea distributions, we define new quark functions for the polarized case, which reproduce well the proton data and are in better agreement with the neutron data. When our results are compared with similar calculations using non-composite constituent quarks the accord with the experiments of the present scheme is impressive. We conclude that, also in the polarized case, DIS data are consistent with a low energy scenario dominated by composite constituents of the nucleon.Comment: 18 pages; latex; 4 ps figures. Final version to appear in Phys. Lett. B; discussion about the polarized sea slightly change

Lifetime vs. rate capability: Understanding the role of FEC and VC in high-energy Li-ion batteries with nano-silicon anodes

Fluoroethylene carbonate (FEC) and vinylene carbonate (VC) are the most frequently used electrolyte components to enhance the lifetime of anode materials in Li-ion batteries, but for silicon it is still ambiguous when FEC or VC is more beneficial. Herein, a nanostructured silicon/carbon anode derived from low-cost HSiCl3 is tailored by the rational choice of the electrolyte component, to obtain an anode material outperforming current complex silicon structures. We demonstrate highly reversible areal capacities of up to 5 mA h/cm2 at 4.4 mg/cm2 mass loading, a specific capacity of 1280 mA h/gElectrode, a capacity retention of 81% after 500 deep-discharge cycles versus lithium metal and successful full-cell tests with high-voltage cathodes meeting the requirements for real application. Electrochemical impedance spectroscopy and post-mortem investigation provide new insights in tailoring the interfacial properties of silicon-based anodes for high performance anode materials based on an alloying mechanism with large volume changes. The role of fluorine in the FEC-derived interfacial layer is discussed in comparison with the VC-derived layer and possible degradation mechanisms are proposed. We believe that this study gives a valuable understanding and provides new strategies on the facile use of additives for highly reversible silicon anodes in Li-ion batteries

Silica nanoparticles are less toxic to human lung cells when deposited at the air-liquid interface compared to conventional submerged exposure

Background: Investigations on adverse biological effects of nanoparticles (NPs) in the lung by in vitro studies are usually performed under submerged conditions where NPs are suspended in cell culture media. However, the behaviour of nanoparticles such as agglomeration and sedimentation in such complex suspensions is difficult to control and hence the deposited cellular dose often remains unknown. Moreover, the cellular responses to NPs under submerged culture conditions might differ from those observed at physiological settings at the air–liquid interface.Results: In order to avoid problems because of an altered behaviour of the nanoparticles in cell culture medium and to mimic a more realistic situation relevant for inhalation, human A549 lung epithelial cells were exposed to aerosols at the air–liquid interphase (ALI) by using the ALI deposition apparatus (ALIDA). The application of an electrostatic field allowed for particle deposition efficiencies that were higher by a factor of more than 20 compared to the unmodified VITROCELL deposition system. We studied two different amorphous silica nanoparticles (particles produced by flame synthesis and particles produced in suspension by the Stöber method). Aerosols with well-defined particle sizes and concentrations were generated by using a commercial electrospray generator or an atomizer. Only the electrospray method allowed for the generation of an aerosol containing monodisperse NPs. However, the deposited mass and surface dose of the particles was too low to induce cellular responses. Therefore, we generated the aerosol with an atomizer which supplied agglomerates and thus allowed a particle deposition with a three orders of magnitude higher mass and of surface doses on lung cells that induced significant biological effects. The deposited dose was estimated and independently validated by measurements using either transmission electron microscopy or, in case of labelled NPs, by fluorescence analyses. Surprisingly, cells exposed at the ALI were less sensitive to silica NPs as evidenced by reduced cytotoxicity and inflammatory responses.Conclusion: Amorphous silica NPs induced qualitatively similar cellular responses under submerged conditions and at the ALI. However, submerged exposure to NPs triggers stronger effects at much lower cellular doses. Hence, more studies are warranted to decipher whether cells at the ALI are in general less vulnerable to NPs or specific NPs show different activities dependent on the exposure method

Is Computed-Tomography-Based Body Composition a Reliable Predictor of Chemotherapy-Related Toxicity in Pancreatic Cancer Patients?

BACKGROUND Malnutrition, loss of weight and of skeletal muscle mass are frequent in pancreatic cancer patients, a majority of which will undergo chemotherapy over the course of their disease. Available data suggest a negative prognostic role of these changes in body composition on disease outcomes; however, it is unclear whether tolerance to chemotherapeutic treatment is similarly and/or negatively affected. We aimed to explore this association by retrospectively assessing changes in body composition and chemotherapy-related toxicity in a cohort of advanced pancreatic cancer patients. METHODS Body composition was evaluated through clinical parameters and through radiological assessment of muscle mass, skeletal muscle area, skeletal muscle index and skeletal muscle density; and an assessment of fat distribution by subcutaneous adipose tissue and visceral adipose tissue. We performed descriptive statistics, pre/post chemotherapy comparisons and uni- and multivariate analyses to assess the relation between changes in body composition and toxicity. RESULTS Toxicity risk increased with an increase of skeletal muscle index (OR: 1.03) and body mass index (OR: 1.07), whereas it decreased with an increase in skeletal muscle density (OR: 0.96). Multivariate analyses confirmed a reduction in the risk of toxicity only with an increase in skeletal muscle density (OR: 0.96). CONCLUSIONS This study suggests that the retrospective analysis of changes in body composition is unlikely to be useful to predict toxicity to gemcitabine-nab-paclitaxel