Attitude and Motivation for Learning English and their Impact on Performance: A Study on Engineering Students of Jessore University of Science and Technology

Learners\u27 cognitive, metacognitive, individual differences and demographic characteristics have been found having profound impact on their linguistic performance. This study has tried to observe two such factors namely motivation and attitude of the learners and their impact on the learners\u27 proficiency. An adapted version of AMTB and a TEEP test have been used to statistically measure the level of motivation and attitude of the learners for learning English and the correlation between these two learner factors and their language performance. The study has found that learners\u27 overall motivation level is average though instrumental motivation outscores integrative motivation and they have a mixed attitude towards learning English. Neither motivation nor attitude is significantly correlated with learners\u27 proficiency

Sonochemical Synthesis, Characterization, and Photocatalytic Performance Evaluation of Au/ZnO Nanocomposite for Methyl Orange Degradation

This study examines the impact of gold (Au) incorporation on zinc oxide (ZnO) nanoparticles. Both pure ZnO and Au/ZnO nanocomposite have been synthesized using a unique and environmentally friendly sonochemical approach. The as-synthesized Au/ZnO nanocomposite was characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), and ultraviolet-visible (UV-vis) spectroscopic techniques. Under UV-visible irradiation, the photocatalytic effectiveness of ZnO nanoparticles and Au/ZnO nanocomposites for the degradation of dye was examined. The results demonstrated that the nanocomposite has greater photocatalytic activity than ZnO nanoparticles. This is due to the effective electron transfer from ZnO to Au prolonging the lifetime of photogenerated holes, which play the most important role in the dye degradation process.&nbsp

Knowledge and Practice of Oral Health and Hygiene and Oral Health Status among School Going Adolescents in a Rural Area of Sylhet District, Bangladesh

A cross-sectional, descriptive study was done at a rural high school in Zakiganj Upazila of Sylhet District, Bangladesh, between January and December of 2014, to determine knowledge and practice of oral health and hygiene and oral health status among school going adolescents. Students from three classes: class VIII, IX and X, and aged 12-16 years were taken for the study. Study samples were collected by using simple random sampling technique. A total of 90 students were divided into two age groups: 12-14 years and 15-16 years. A pre-designed, self-administered questionnaire was used for demographic survey and knowledge of oral health and hygiene (a 10-point questionnaire) and practice (a 7-point questionnaire). Then a plane mouth mirror and periodontal probe was used for examining oral health status in those school children. Oral hygiene status was measured by simplified Green and Vermillion Oral Hygiene Index. The mean age of the respondents was 14.37±0.50 years. Females were 68 (75.6%) and males were 22 (24.4%). 31 (34.4%) were from class VIII, 30 (33.3%) from class IX and 29 (32.2%) were from class X. 33.3% of the respondents have scored below the mean of the total knowledge score while 66.7% has scored above the mean (6.86±2.05). Pearson’s correlation coefficient (+0.342) revealed that an increase in knowledge score would lead to increase in practice score. The younger group had higher mean knowledge score than older group (7.15+1.35 vs. 6.58+2.54; P=0.017); however, no significant difference was found between males and females (6.90±1.74 vs. 6.85±2.15; P=0.432). There was no significant difference in Debris Index (DI), Calculous Index (CI) and Oral Health Index (OHI) scores in between age groups and genders. On educational status, significant difference was observed only in OHI score (P=0.001) among those three classes of students. Overall, only 31% had good oral hygiene, while 59% respondents had fair and 10% had poor oral hygiene status

HIV and AIDS in Bangladesh

Bangladesh initiated an early response to the HIV epidemic starting in the mid-1980s. Since then, the res-ponse has been enhanced considerably, and many HIV-prevention interventions among the most at-risk populations and the general youth are being undertaken. Alongside prevention activities, gathering of data has been a key activity fostered by both the Government and individual development partners. This paper reviews available sources of data, including routine surveillance (HIV and behavioural among most at-risk populations), general population surveys, and various research studies with the aim to understand the dynamics of the HIV epidemic in Bangladesh. Available data show that the HIV epidemic is still at relatively low levels and is concentrated mainly among injecting drug users (IDUs) in Dhaka city. In addition, when the passively-reported cases were analyzed, another population group that appears to be especially vulnerable is migrant workers who leave their families and travel abroad for work. However, all sources of data confirm that risk behaviours that make individuals vulnerable to HIV are high—this is apparent within most at-risk populations and the general population (adult males and youth males and females). Based on the current activities and the sources of data, modelling exercises of the future of the HIV epidemic in Dhaka suggest that, if interventions are not enhanced further, Bangladesh is likely to start with an IDU-driven epidemic, similar to other neighbouring countries, which will then move to other population groups, including sex workers, males who have sex with males, clients of sex workers, and ultimately their families. This review reiterates the often repeated message that if Bangladesh wants to be an example of how to avert an HIV epidemic, it needs to act now using evidence-based programming

Estimating Catastrophic Costs due to Pulmonary Tuberculosis in Bangladesh

To eliminate TB from the country by the year 2030, the Bangladesh National Tuberculosis (TB) Program is providing free treatment to the TB patients since 1993. However, the patients are still to make Out-of-their Pocket (OOP) payment, particularly before their enrollment Directly Observed Treatment Short-course (DOTS). This places a significant economic burden on poor-households. We, therefore, aimed to estimate the Catastrophic Health Expenditure (CHE) due to TB as well as understand associated difficulties faced by the families when a productive family member age (15–55) suffers from TB. The majority of the OOP expenditures occur before enrolling in. We conducted a cross-sectional study using multistage sampling in the areas of Bangladesh where Building Resources Across Communities (BRAC) provided TB treatment during June 2016. In total, 900 new TB patients, aged 15–55 years, were randomly selected from a list collected from BRAC program. CHE was defined as the OOP payments that exceeded 10% of total consumption expenditure of the family and 40% of total non-food expenditure/capacity-to-pay. Regular and Bayesian simulation techniques with 10,000 replications of re-sampling with replacement were used to examine robustness of the study findings. We also used linear regression and logit model to identify the drivers of OOP payments and CHE, respectively. The average total cost-of-illness per patient was 124 US$, of which 68% was indirect cost. The average CHE was 4.3% of the total consumption and 3.1% of non-food expenditure among the surveyed households. The poorest quintile of the households experienced higher CHE than their richest counterpart, 5% vs. 1%. Multiple regression model showed that the risk of CHE increased among male patients with smear-negative TB and delayed enrolling in the DOTS. Findings suggested that specific groups are more vulnerable to CHE who needs to be brought under innovative safety-net schemes

HIV and AIDS in Bangladesh

Bangladesh initiated an early response to the HIV epidemic starting in the mid-1980s. Since then, the res-ponse has been enhanced considerably, and many HIV-prevention interventions among the most at-risk populations and the general youth are being undertaken. Alongside prevention activities, gathering of data has been a key activity fostered by both the Government and individual development partners. This paper reviews available sources of data, including routine surveillance (HIV and behavioural among most at-risk populations), general population surveys, and various research studies with the aim to understand the dynamics of the HIV epidemic in Bangladesh. Available data show that the HIV epidemic is still at relatively low levels and is concentrated mainly among injecting drug users (IDUs) in Dhaka city. In addition, when the passively-reported cases were analyzed, another population group that appears to be especially vulnerable is migrant workers who leave their families and travel abroad for work. However, all sources of data confirm that risk behaviours that make individuals vulnerable to HIV are high-this is apparent within most at-risk populations and the general population (adult males and youth males and females). Based on the current activities and the sources of data, modelling exercises of the future of the HIV epidemic in Dhaka suggest that, if interventions are not enhanced further, Bangladesh is likely to start with an IDU-driven epidemic, similar to other neighbouring countries, which will then move to other population groups, including sex workers, males who have sex with males, clients of sex workers, and ultimately their families. This review reiterates the often repeated message that if Bangladesh wants to be an example of how to avert an HIV epidemic, it needs to act now using evidence-based programming

Spatial pattern and land surface features associated with cloud-to-ground lightning in Bangladesh : an exploratory study

Severe weather events such as lightning appear to be a significant threat to humans and property in South Asia, an area known for intense convective activity directly related to the tropical climate of these areas. The current study was conducted in Bangladesh and examined the association between cloud-to-ground (CG) lightning and ground surface properties, with the aim of improving existing knowledge regarding this phenomenon. GLD360 data from 2015 to 2020 were used to describe the seasonal lightning climatology. Elevation, land use and land cover, vegetation and surface heat flux data were used to examine all land surface features possibly associated with CG lightning occurrence. Hot and cold spot spatial patterning was calculated using local indicators of spatial association. Results indicated a strong CG lightning seasonality. CG stroke density varied considerably across seasons with the pre-monsoon exhibiting the highest density. This was followed by occurrences in the monsoon season. The March–June period experienced 73% of the total observed. Elevation appeared to influence the post-monsoon CG stroke, however, its role in the other seasons was more difficult to define. The land cover/lightning index indicated that waterbodies and herbaceous wetlands had more influence than other land cover types, both during the day and at night, and it appeared that latent heat flux played a major role. The CG stroke hot and cold spot locations varied diurnally. The findings suggest that large-scale irrigation practices, especially during the pre-monsoon months, can influence the observed spatiotemporal pattern. The production of hotspot maps could be an initial step in the development of a reliable lightning monitoring system and play a part in increasing public awareness of this issue

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries

Covid-19 waste facemask conundrum: A facile way of utilization through fabricating composite material with unsaturated polyester resin and evaluation of its mechanical properties

Since the outbreak of novel coronavirus (COVID-19), the use of personal protective equipment (PPE) has increased profusely. Among all the PPEs, face masks are the most picked ones by the mass people for protective purpose. This spawned extensive daily use of face masks and production of masks had to augment to keep up this booming demand. Such extensive use of face masks has resulted in a huge waste generation. Lack of proper disposal, waste management and waste recycling have already led this waste to pervade in the environment. In quest of finding a solution, here in this research, a composite material was fabricated utilizing waste face mask (WFM) with unsaturated polyester resin (UPR) and the mechanical properties were evaluated. The composites were fabricated by incorporating 1%, 2%, 3%, 4% and 5% WFM (by weight) within the UPR matrix in the shredded form following hand lay-up technique. Tensile properties, i.e., tensile strength (TS), tensile modulus (TM) and percentage elongation at break (% EB) as well as flexural properties, i.e., bending strength (BS) and bending modulus (BM) were evaluated for the fabricated composites. According to the results obtained, the 2% WFM loaded composites showed highest values of TS, TM, BS and BM which are 31.61 N/mm2, 1551.41 N/mm2, 66.53 N/mm2 and 4632.71 N/mm2 respectively. These values of 2% WFM loaded composite are 69.58%, 107.78%, 129.49% and 152% higher than the values of the control sample (UPR). Such results depict the successfulness of WFM's incorporation as a reinforcing material in the composite materials. Attenuated Total Reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), water uptake and thickness swelling tests were also carried out for the fabricated composites. FTIR of the collected WFM revealed the fiber to be of polypropylene and the existing functional groups were also identified. The SEM images confirmed the proper adhesion of WFM and UPR in terms of mechanical bonding rather than chemical bonding. Water absorption and dimension change was investigated by water uptake and thickness swelling test. To sum up, the way we have utilized WFM as a reinforcing agent in a composite material, this could be a possible solution for the face mask's waste conundrum