1,844 research outputs found
Introduction
This is the author accepted manuscript. The final version is available from Bristol Record Society via the DOI in this record Archived with permission of the Bristol Record SocietyBristol Record Society's publications vol. 6
Recommended from our members
Manipulating nanoscale structure to control functionality in printed organic photovoltaic, transistor and bioelectronic devices.
Printed electronics is simultaneously one of the most intensely studied emerging research areas in science and technology and one of the fastest growing commercial markets in the world today. For the past decade the potential for organic electronic (OE) materials to revolutionize this printed electronics space has been widely promoted. Such conviction in the potential of these carbon-based semiconducting materials arises from their ability to be dissolved in solution, and thus the exciting possibility of simply printing a range of multifunctional devices onto flexible substrates at high speeds for very low cost using standard roll-to-roll printing techniques. However, the transition from promising laboratory innovations to large scale prototypes requires precise control of nanoscale material and device structure across large areas during printing fabrication. Maintaining this nanoscale material control during printing presents a significant new challenge that demands the coupling of OE materials and devices with clever nanoscience fabrication approaches that are adapted to the limited thermodynamic levers available. In this review we present an update on the strategies and capabilities that are required in order to manipulate the nanoscale structure of large area printed organic photovoltaic (OPV), transistor and bioelectronics devices in order to control their device functionality. This discussion covers a range of efforts to manipulate the electroactive ink materials and their nanostructured assembly into devices, and also device processing strategies to tune the nanoscale material properties and assembly routes through printing fabrication. The review finishes by highlighting progress in printed OE devices that provide a feedback loop between laboratory nanoscience innovations and their feasibility in adapting to large scale printing fabrication. The ability to control material properties on the nanoscale whilst simultaneously printing functional devices on the square metre scale is prompting innovative developments in the targeted nanoscience required for OPV, transistor and biofunctional devices
Sustainability performance measurement : a preliminary classification framework of models and indicators
In this position paper we focus on the diversity of sustainability measurements. Based on existing research on performance measurement, we propose a preliminary classification framework summarizing sustainability models and indicators. By describing illustrative examples, we claim that several models and indicators can be distinguished with their own peculiarities. Having such a framework is interesting for both academia and business to structure the range of models and indicators and to ultimately select the appropriate sustainability measurement approach. The proposed framework should be validated by further research
EMIC Waves in the Earth\u27s Inner Magnetosphere as a Function of Solar Wind Structures During Solar Maximum
Here we analyze the statistics of electromagnetic ion cyclotron (EMIC) waves observed in the Earth\u27s inner magnetosphere during coronal mass ejection (CME), high-speed stream (HSS), and quiet solar wind (QSW) conditions in the upstream solar wind (SW). For our analysis we use the EMIC wave observations by the two Van Allen Probes during their first magnetic local time (MLT) revolution. The major results of our analysis are as follows: (1) Criteria to identify the HSS, CME, and QSW conditions in the SW are formulated. (2) 54%, 36%, and 10% of EMIC wave events are observed during CME, HSS, and QSW, respectively. (3) 12% of events are closely associated with the fast growth of magnetospheric compression, among which 76%, 24%, and 0% are observed during CME, HSS, and QSW, respectively. (4) A majority of the QSW, HSS-driven, and CME-driven events is observed in the 9–12, 12–24, and 8–24 hr MLT sectors, respectively. (5) CME-driven events are distributed along all L shells, whereas the majority of the HSS-driven and QSW events are confined to L \u3e 3.5. (6) The fractions of events during CME and HSS have a maximum in the near-equatorial region, whereas the fractions of the QSW events have a minimum there. (7) Independent of the SW driver, no strong events are observed below the local O+ gyrofrequency, whereas 65–70% and 30–35% of events are observed between the O+ and He+ gyrofrequencies and above the He+ gyrofrequency, respectively
Partner selection for reverse logistics centres in green supply chains: a fuzzy artificial immune optimisation approach
The design of reverse logistics networks has now emerged as a major issue for manufacturers, not only in developed countries where legislation and societal pressures are strong, but also in developing countries where the adoption of reverse logistics practices may offer a competitive advantage. This paper presents a new model for partner selection for reverse logistic centres in green supply chains. The model offers three advantages. Firstly, it enables economic, environment, and social factors to be considered simultaneously. Secondly, by integrating fuzzy set theory and artificial immune optimization technology, it enables both quantitative and qualitative criteria to be considered simultaneously throughout the whole decision-making process. Thirdly, it extends the flat criteria structure for partner selection evaluation for reverse logistics centres to the more suitable hierarchy structure. The applicability of the model is demonstrated by means of an empirical application based on data from a Chinese electronic equipment and instruments manufacturing company
Science Goals and Overview of the Radiation Belt Storm Probes (RBSP) Energetic Particle, Composition, and Thermal Plasma (ECT) Suite on NASA’s Van Allen Probes Mission
The Radiation Belt Storm Probes (RBSP)-Energetic Particle, Composition, and Thermal Plasma (ECT) suite contains an innovative complement of particle instruments to ensure the highest quality measurements ever made in the inner magnetosphere and radiation belts. The coordinated RBSP-ECT particle measurements, analyzed in combination with fields and waves observations and state-of-the-art theory and modeling, are necessary for understanding the acceleration, global distribution, and variability of radiation belt electrons and ions, key science objectives of NASA’s Living With a Star program and the Van Allen Probes mission. The RBSP-ECT suite consists of three highly-coordinated instruments: the Magnetic Electron Ion Spectrometer (MagEIS), the Helium Oxygen Proton Electron (HOPE) sensor, and the Relativistic Electron Proton Telescope (REPT). Collectively they cover, continuously, the full electron and ion spectra from one eV to 10’s of MeV with sufficient energy resolution, pitch angle coverage and resolution, and with composition measurements in the critical energy range up to 50 keV and also from a few to 50 MeV/nucleon. All three instruments are based on measurement techniques proven in the radiation belts. The instruments use those proven techniques along with innovative new designs, optimized for operation in the most extreme conditions in order to provide unambiguous separation of ions and electrons and clean energy responses even in the presence of extreme penetrating background environments. The design, fabrication and operation of ECT spaceflight instrumentation in the harsh radiation belt environment ensure that particle measurements have the fidelity needed for closure in answering key mission science questions. ECT instrument details are provided in companion papers in this same issue. In this paper, we describe the science objectives of the RBSP-ECT instrument suite on the Van Allen Probe spacecraft within the context of the overall mission objectives, indicate how the characteristics of the instruments satisfy the requirements to achieve these objectives, provide information about science data collection and dissemination, and conclude with a description of some early mission results
Partner selection in green supply chains using PSO – a practical approach
Partner selection is crucial to green supply chain management as the focal firm is responsible for the environmental performance of the whole supply chain. The construction of appropriate selection criteria is an essential, but often neglected pre-requisite in the partner selection process. This paper proposes a three-stage model that combines Dempster-Shafer belief acceptability theory and particle swarm optimization technique for the first time in this application. This enables optimization of both effectiveness, in its consideration of the inter-dependence of a broad range of quantitative and qualitative selection criteria, and efficiency in its use of scarce resources during the criteria construction process to be achieved simultaneously. This also enables both operational and strategic attributes can be selected at different levels of hierarchy criteria in different decision-making environments. The practical efficacy of the model is demonstrated by an application in Company ABC, a large Chinese electronic equipment and instrument manufacturer
Sticky feet:a tribological study of climbing shoe rubber
This study examines the tribological properties of climbing shoe rubbers, challenging the common belief in the climbing community that softer rubbers are inherently grippier. This study investigates the mechanical and wear characteristics of climbing shoe rubbers by employing a high-precision modular mechanical testing environment (Bruker UMT TriboLab) and representative granite counter-surfaces. Key parameters, including surface roughness, Shore A hardness, interfacial adhesion, static and dynamic friction coefficients, and material wear patterns, were analyzed. The mechanical properties of each rubber compound were characterized through Shore A hardness testing and ball indentation–retraction tests, measuring indentation force, energy, and adhesive properties. Sliding friction tests, simulating real climbing conditions, were conducted to understand the tribological behavior of each rubber compound under different loads, further analyzing static and dynamic friction coefficients and wear characteristics. The findings of this study indicate that rubber performance is a convolution of several factors, including material hardness, surface roughness, and interfacial adhesion. Contrary to popular belief, softer rubbers did not consistently exhibit superior tribological characteristics. The findings of this study suggest that climbing shoe selection and design should consider a broader range of material characteristics beyond hardness, emphasizing the role of surface roughness and adhesion in determining overall frictional performance. This research offers valuable insights for the climbing community, providing methodologies to benchmark climbing rubber material characteristics
Use of caffeinated substances and risk of crashes in long distance drivers of commercial vehicles: case-control study
Objective: To determine whether there is an association between use of substances that contain caffeine and the risk of crash in long distance commercial vehicle drivers.Design: Case-control studySetting: New South Wales (NSW) and Western Australia (WA), Australia.Participants: 530 long distance drivers of commercial vehicles who were recently involved in a crash attended by police (cases) and 517 control drivers who had not had a crash while driving a commercial vehicle in the past 12 months.Main outcome measure: The likelihood of a crash associated with the use of substances containing caffeine after adjustment for factors including age, health disorders, sleep patterns, and symptoms of sleep disorders as well as exposures such as kilometres driven, hours slept, breaks taken, and night driving schedules.Results: Forty three percent of drivers reported consuming substances containing caffeine, such as tea, coffee, caffeine tablets, or energy drinks for the express purpose of staying awake. Only 3% reported using illegal stimulants such as amphetamine (“speed”); 3,4 methylenedioxymethamphetamine (ecstasy); and cocaine. After adjustment for potential confounders, drivers who consumed caffeinated substances for this purpose had a 63% reduced likelihood of crashing (odds ratio 0.37, 95% confidence interval 0.27 to 0.50) compared with drivers who did not take caffeinated substances.Conclusions: Caffeinated substances are associated with a reduced risk of crashing for long distance commercial motor vehicle drivers. While comprehensive mandated strategies for fatigue management remain a priority, the use of caffeinated substances could be a useful adjunct strategy in the maintenance of alertness while driving
- …