33 research outputs found
The DC06 Outer Tracker Simulation
This note gives an overview of the Outer Tracker simulation for the 2006 Data Challenge (DC06). It covers the Outer Tracker detector description used in Gauss/Geant to simulate hits in the Outer Tracker and the digitisation of the hits in Boole. It concludes with the expected performance of the Outer Tracker
Alignment of the LHCb detector with Kalman filter fitted tracks
The LHCb detector, operating at the Large Hadron Collider at CERN, is a single arm spectrometer optimised for the detection of forward b and anti-b production for b physics studies. The reconstruction of vertices and tracks is done by silicon micro-strip and gaseous straw-tube based detectors. To obtain excellent momentum, mass and vertex resolutions, the detectors need to be aligned well within the hit resolution for a given detector. We present a general and easy to configure alignment framework which uses the closed from method of alignment with Kalman filter fitted tracks to determine the alignment parameters. This allows us to use the standard LHCb track model and fit, and correctly take complexities such as multiple scattering and energy loss corrections into account. With this framework it is possible to align any detector for any degree of freedom
First studies of T-station alignment with simulated data
The alignment of the tracking stations using tracks fitted using standard LHCb track fit is studied. The procedure is presented together with two examples using simulated data. The first scenario presents the alignment of the IT and OT layers using beam-gas events at 450~GeV with no magnetic field. The second scenario is the alignment of the OT layers and IT boxes, layers and ladders with magnet-on data using minimum bias events at nominal energy. The results are validated by refitting J/ tracks using the misaligned geometry compared to the re-aligned case as well as the default. It is shown that after alignment the J mass resolution is degraded by at most 3~\%
Alignment of LHCb tracking stations with tracks fitted with a Kalman filter
The LHCb detector, operating at the Large Hadron Collider at CERN, is a single arm spectrometer optimized for the detection of the forward b anti-b production for b physics studies. The reconstruction of vertices and tracks is done by silicon micro-strips and gaseous straw-tube based detectors. In order to achieve good mass resolution for resonances the tracking detectors should be aligned to a precision of the order of ten microns. A software framework has been developed to achieve these goals and has been tested in various configurations. After a description of the software, we present alignment results and show in particular for the first time that a global solving for alignment using a locally parameterized track trajectory can be achieved
Detecting high indoor crowd density with Wi-Fi localization: a statistical mechanics approach
Application of vertex and mass constraints in track-based alignment
The software alignment of planar tracking detectors using samples of charged
particle trajectories may lead to global detector distortions that affect
vertex and momentum resolution. We present an alignment procedure that
constrains such distortions by making use of samples of decay vertices
reconstructed from two or more trajectories and putting constraints on their
invariant mass. We illustrate the method by using a sample of invariant-mass
constrained vertices from D^0 --> K^- pi^+ decays to remove a curvature bias in
the LHCb spectrometer.Comment: 18 pages, 6 figure
First observation of Bs -> D_{s2}^{*+} X mu nu decays
Using data collected with the LHCb detector in proton-proton collisions at a
centre-of-mass energy of 7 TeV, the semileptonic decays Bs -> Ds+ X mu nu and
Bs -> D0 K+ X mu nu are detected. Two structures are observed in the D0 K+ mass
spectrum at masses consistent with the known D^+_{s1}(2536) and
$D^{*+}_{s2}(2573) mesons. The measured branching fractions relative to the
total Bs semileptonic rate are B(Bs -> D_{s2}^{*+} X mu nu)/B(Bs -> X mu nu)=
(3.3\pm 1.0\pm 0.4)%, and B(Bs -> D_{s1}^+ X munu)/B(Bs -> X mu nu)= (5.4\pm
1.2\pm 0.5)%, where the first uncertainty is statistical and the second is
systematic. This is the first observation of the D_{s2}^{*+} state in Bs
decays; we also measure its mass and width.Comment: 8 pages 2 figures. Published in Physics Letters
Prompt K_short production in pp collisions at sqrt(s)=0.9 TeV
The production of K_short mesons in pp collisions at a centre-of-mass energy
of 0.9 TeV is studied with the LHCb detector at the Large Hadron Collider. The
luminosity of the analysed sample is determined using a novel technique,
involving measurements of the beam currents, sizes and positions, and is found
to be 6.8 +/- 1.0 microbarn^-1. The differential prompt K_short production
cross-section is measured as a function of the K_short transverse momentum and
rapidity in the region 0 < pT < 1.6 GeV/c and 2.5 < y < 4.0. The data are found
to be in reasonable agreement with previous measurements and generator
expectations.Comment: 6+18 pages, 6 figures, updated author lis
The selection
This note presents a possible selection algorithm for \jpsimumu at LHCb with a total selection efficiency of for inclusive \jpsi events.The retention rates for -inclusive and minimum bias events are RR_{b-\incl} = (1.26 \pm 0.08) \times 10^{-3} and . The expected annual number of \jpsi events is . The reconstructed mass for a sample of 100 \kilo inclusive \jpsi events is M_{J/\psi} = 3096.33 \pm 0.07 \mevctwo with a mass resolution of \sigma_{J/\psi} = 9.943 \pm 0.058 \mevctwo