155 research outputs found
Multilayer and conformal antennas using synthetic dielectric substrates
This document is made available in accordance with publisher policies. Please cite only the published version using the reference above. Full terms of use are available
Current conservative management and classification of club foot: A review
© 2016 - IOS Press and the authors. All rights reserved. Clubfoot, known as congenital talipes equinovarus, is one of the complex paediatric foot deformity with the incidence of 1 in every 1000 live births. It consists of four complex foot abnormalities such as forefoot adductus, midfoot cavus, and hindfoot varus and ankle equinus. There are a number of surgical techniques (soft tissue releases, arthrodesis) used to correct clubfoot. However currently the conservative management (manipulation, serial casting, and braces) of clubfoot is considered as the best choice and it is widely accepted among orthopaedists. Clubfoot treated with surgical techniques might suffer various complications such as soft tissues contractures, neurovascular complications, infections, and shortening of the limbs. Although conservative method is generally considered as an effective method, it is still challenging to cure clubfoot in advance stages. Also, the classification of the initial severity of clubfoot is essential to evaluate the outcome of the treatment. In this review, the aim is to review the different types of conservative method and the assessment of clubfoot severity
A Composite Method for Human Foot Structural Modeling
© 2015 The Authors A novel method including range-sensing scanning with texture and foot anatomical structure morphing basing on OpenSim is proposed. Palpation of important anatomical landmarks on foot surface was conducted by a physical therapist, and a range-sensing device, Microsoft Kinect sensor, was adopted for the 3D textured model acquisition. 3D coordinate data of the landmarks were measured and harnessed in OpenSim for subject-specific skeletal scaling based on a generic foot musculoskeletal model. The muscle attachment point coordinates derived from an anatomy database basing on sampling from East Asia people were used for muscle modelling. Then the 3D textured foot surface was registered with the morphed anatomical structures so that an integrated foot model was generated. The surface landmark locations were then compared with the corresponding internal bony sites and the errors were calculated to evaluate the accuracy and validity of this method. The potential error sources such as soft tissue thickness and scaling error were also mentioned and discussed. This technique is useful to create individual anatomically accurate human digital models for product design and development
Ponseti method in the management of clubfoot under 2 years of age: A systematic review
© 2017 Ganesan et al. This is an open access article distributed under the terms of the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original author and source are credited. Background: Congenital talipes equinovarus (CTEV), also known as clubfoot, is common congenital orthopedic foot deformity in children characterized by four components of foot deformities: hindfoot equinus, hindfoot varus, midfoot cavus, and forefoot adduction. Although a number of conservative and surgical methods have been proposed to correct the clubfoot deformity, the relapses of the clubfoot are not uncommon. Several previous literatures discussed about the technical details of Ponseti method, adherence of Ponseti protocol among walking age or older children. However there is a necessity to investigate the relapse pattern, compliance of bracing, number of casts used in treatment and the percentages of surgical referral under two years of age for clear understanding and better practice to achieve successful outcome without or reduce relapse. Therefore this study aims to review the current evidence of Ponseti method (manipulation, casting, percutaneous Achilles tenotomy, and bracing) in the management of clubfoot under two years of age. Materials and methods: Articles were searched from 2000 to 2015, in the following databases to identify the effectiveness of Ponseti method treatment for clubfoot: Medline, Cumulative Index to Nursing and Allied Health Literature (CINHAL), PubMed, and Scopus. The database searches were limited to articles published in English, and articles were focused on the effectiveness of Ponseti method on children with less than 2 years of age. Results: Of the outcome of 1095 articles from four electronic databases, twelve articles were included in the review. Pirani scoring system, Dimeglio scoring system, measuring the range of motion and rate of relapses were used as outcome measures. Conclusions: In conclusion, all reviewed, 12 articles reported that Ponseti method is a very effective method to correct the clubfoot deformities. However, we noticed that relapses occur in nine studies, which is due to the non-adherence of bracing regime and other factors such as low income and social economic status
Designing footwear and braces for children with clubfoot deformity
2014-2015 > Academic research: refereed > Refereed conference paperVersion of RecordPublishe
Developing a three-dimensional (3D) assessment method for clubfoot-A study protocol
© 2018 Ganesan, Luximon, Al-Jumaily, Yip, Gibbons and Chivers. Background: Congenital talipes equinovarus (CTEV) or clubfoot is a common pediatric congenital foot deformity that occurs 1 in 1,000 live births. Clubfoot is characterized by four types of foot deformities: hindfoot equinus; midfoot cavus; forefoot adductus; and hindfoot varus. A structured assessment method for clubfoot is essential for quantifying the initial severity of clubfoot deformity and recording the progress of clubfoot intervention. Aim: This study aims to develop a three-dimensional (3D) assessment method to evaluate the initial severity of the clubfoot and monitor the structural changes of the clubfoot after each casting intervention. In addition, this study explores the relationship between the thermophysiological changes in the clubfoot at each stage of the casting intervention and in the normal foot. Methods: In this study, a total of 10 clubfoot children who are < 2 years old will be recruited. Also, the data of the unaffected feet of a total of 10 children with unilateral clubfoot will be obtained as a reference for normal feet. A Kinect 3D scanner will be used to collect the 3D images of the clubfoot and normal foot, and an Infrared thermography camera (IRT camera) will be used to collect the thermal images of the clubfoot. Three-dimensional scanning and IR imaging will be performed on the foot once a week before casting. In total, 6-8 scanning sessions will be performed for each child participant. The following parameters will be calculated as outcome measures to predict, monitor, and quantify the severity of the clubfoot: Angles cross section parameters, such as length, width, and the radial distance; distance between selected anatomical landmarks, and skin temperature of the clubfoot and normal foot. The skin temperature will be collected on selected areas (forefoot, mid foot, and hindfoot) to find out the relationship between the thermophysiological changes in the clubfoot at each stage of the casting treatment and in the normal foot. Ethics: The study has been reviewed and approved on 17 August 2016 by the Sydney Children's Hospitals Network Human Research Ethics Committee (SCHN HREC), Sydney, Australia. The Human Research Ethics Committee (HREC) registration number for this study is: HREC/16/SCHN/163
Dynamic 3D shape of the plantar surface of the foot using coded structured light:a technical report
The foot provides a crucial contribution to the balance and stability of the musculoskeletal system, and accurate foot measurements are important in applications such as designing custom insoles/footwear. With better understanding of the dynamic behavior of the foot, dynamic foot reconstruction techniques are surfacing as useful ways to properly measure the shape of the foot. This paper presents a novel design and implementation of a structured-light prototype system providing dense three dimensional (3D) measurements of the foot in motion. The input to the system is a video sequence of a foot during a single step; the output is a 3D reconstruction of the plantar surface of the foot for each frame of the input.
Methods
Engineering and clinical tests were carried out to test the accuracy and repeatability of the system. Accuracy experiments involved imaging a planar surface from different orientations and elevations and measuring the fitting errors of the data to a plane. Repeatability experiments were done using reconstructions from 27 different subjects, where for each one both right and left feet were reconstructed in static and dynamic conditions over two different days.
Results
The static accuracy of the system was found to be 0.3 mm with planar test objects. In tests with real feet, the system proved repeatable, with reconstruction differences between trials one week apart averaging 2.4 mm (static case) and 2.8 mm (dynamic case).
Conclusion
The results obtained in the experiments show positive accuracy and repeatability results when compared to current literature. The design also shows to be superior to the systems available in the literature in several factors. Further studies need to be done to quantify the reliability of the system in clinical environment
Apparel sizing using trimmed PAM and OWA operators
This paper is concerned with apparel sizing system design. One of the most important issues in the apparel development process is to define a sizing system that provides a good fit to the majority of the population. A sizing system classifies a specific population into homogeneous subgroups based on some key body dimensions. Standard sizing systems range linearly from very small to very large. However, anthropometric measures do not grow linearly with size, so they can not accommodate all body types. It is important to determine each class in the sizing system based on a real prototype that is as representative as possible of each class. In this paper we propose a methodology to develop an efficient apparel sizing system based on clustering techniques jointly with OWA operators. Our approach is a natural extension and improvement of the methodology proposed by McCulloch, Paal, and Ashdown (1998), and we apply it to the anthropometric database obtained from a anthropometric survey of the Spanish female population, performed during 2006.This paper has been partially supported by grants TIN2009-14392-C02-01, TIN2009-14392-C02-02, GV/2011/004 and P1.1A2009-02. We would like also to thank the Biomechanics Institute of Valencia for providing us the data set, and to the Spanish "Ministerio de Sanidad y Consumo" for having promoted and coordinated the "Anthropometric Study of the Female Population in Spain".Ibanez, M.; Vinue, G.; Alemany Mut, MS.; Simo, A.; Epifanio, I.; Domingo, J.; Ayala, G. (2012). Apparel sizing using trimmed PAM and OWA operators. Expert Systems with Applications. 39(12):10512-10520. https://doi.org/10.1016/j.eswa.2012.02.127S1051210520391
Watching People Making Decisions: A Gogglebox on Online Consumer Interaction
This paper presents a research study, using eye tracking technology, to measure participant cognitive load when encountering micro-decision. It elaborates and improves on a pilot study that was used to test the experiment design. Prior research that led to a taxonomy of decision constructs faced in online transactional processes is discussed. The main findings relate to participants’ subjective cognitive load and task error rates
- …