Photoinduced Oxygen Evolution Catalysis Promoted by Polyoxometalate Salts of Cationic Photosensitizers

The insoluble salt Cs15K[Co9(H2O)6(OH)3(HPO4)2(PW9O34)3] (CsCo9) is tested as heterogeneous oxygen evolution catalyst in light-induced experiments, when combined with the homogeneous photosensitizer [Ru(bpy)3]2+ and the oxidant Na2S2O8 in neutral pH. Oxygen evolution occurs in parallel to a solid transformation. Post-catalytic essays indicate that the CsCo9 salt is transformed into the corresponding [Ru(bpy)3]2+ salt, upon cesium loss. Remarkably, analogous photoactivated oxygen evolution experiments starting with the [Ru(bpy)3](5+x)K(6−2x)[Co9(H2O)6(OH)3(HPO4)2(PW9O34)3]·(39+x)H2O (RuCo9) salt demonstrate much higher efficiency and kinetics. The origin of this improved performance is at the cation-anion, photosensitizer-catalyst pairing in the solid state. This is beneficial for the electron transfer event, and for the long-term stability of the photosensitizer. The latter was confirmed as the limiting process during these oxygen evolution reactions, with the polyoxometalate catalyst exhibiting robust performance in multiple cycles, upon addition of photosensitizer, and/or oxidant to the reaction mixture

Cobalt Hexacyanoferrate on BiVO4 Photoanodes for Robust Water Splitting

The efficient integration of photoactive and catalytic materials is key to promoting photoelectrochemical water splitting as a sustainable energy technology built on solar power. Here, we report highly stable water splitting photoanodes from BiVO4 photoactive cores decorated with CoFe Prussian blue-type electrocatalysts (CoFe-PB). This combination decreases the onset potential of BiVO4 by,similar to 0.8 V (down to 0.3 V vs reversible hydrogen electrode (RHE)) and increases the photovoltage by 0.45 V. The presence of the catalyst also leads to a remarkable 6-fold enhancement of the photocurrent at 1.23 V versus RHE, while keeping the light-harvesting ability of BiVO4. Structural and mechanistic studies indicate that CoFe-PB effectively acts as a true catalyst on BiVO4. This mechanism, stemming from the adequate alignment of the energy levels, as showed by density functional theory calculations, allows CoFe-PB to outperform all previous catalyst/BiVO4 junctions and, in addition, leads to noteworthy long-term stability. A bare 10-15% decrease in photocurrent was observed after more than 50 h of operation under light irradiation

Unraveling Charge Transfer in CoFe Prussian Blue Modified BiVO4 Photoanodes

Catalyst modification of metal oxide photoanodes can result in markedly improved water oxidation efficiency. However, the reasons for improvement are often subtle and controversial. Upon depositing a CoFe Prussian blue (CoFe-PB) water oxidation catalyst on BiVO4, a large photocurrent increase and onset potential shift (up to 0.8 V) are observed, resulting in a substantially more efficient system with high stability. To elucidate the origin of this enhancement, we used time-resolved spectroscopies to compare the dynamics of photogenerated holes in modified and unmodified BiVO4 films. Even in the absence of strong positive bias, a fast (pre-ms), largely irreversible hole transfer from BiVO4 to CoFe-PB is observed. This process retards recombination, enabling holes to accumulate in the catalyst. Holes in CoFe-PB remain reactive, oxidizing water at a similar rate to holes in pristine BiVO4. CoFe-PB therefore enhances performance by presenting a favorable interface for efficient hole transfer, combined with the catalytic function necessary to drive water oxidation

Multimodal Prussian blue analogs as contrast agents for X-ray computed tomography

Prussian blue analogs (PBAs) are versatile materials with a wide range of applications. Due to their tunability, intrinsic biocompatibility, as well as low toxicity, these nanoscale coordination polymers have been successfully studied as multimodal contrast agents for multiple imaging techniques. Herein, we report the expanded biomedical application of PBAs to X-ray computed tomography (CT). In our systematic study of the series A{Mn^(II)[Fe^(III)(CN)6]} (A = K^+, Rb^+, Cs^+), we showed that derivatives incorporating Rb+ and Cs+ ions in the tetrahedral sites of the parent face-centered cubic cyano-bridged networks exhibited substantially increased X-ray attenuation coefficients, thus yielding significant contrast compared to the clinically approved X-ray contrast agent iohexol at the same concentrations. Additionally, our μ-CT studies revealed that these PBAs could be useful as dual-energy CT contrast agents for different biological specimens by using the lower varying scanning X-ray tube voltages. Finally, in vitro studies using U87-Luc cells treated with PBAs, including cellular CT imaging and bioluminescence cell viability assays, revealed that PBAs were taken up by the glioblastoma cells, with moderate biocompatibility at concentrations below the mM range

Multimodal Prussian blue analogs as contrast agents for X-ray computed tomography

Prussian blue analogs (PBAs) are versatile materials with a wide range of applications. Due to their tunability, intrinsic biocompatibility, as well as low toxicity, these nanoscale coordination polymers have been successfully studied as multimodal contrast agents for multiple imaging techniques. Herein, we report the expanded biomedical application of PBAs to X-ray computed tomography (CT). In our systematic study of the series A{Mn^(II)[Fe^(III)(CN)6]} (A = K^+, Rb^+, Cs^+), we showed that derivatives incorporating Rb+ and Cs+ ions in the tetrahedral sites of the parent face-centered cubic cyano-bridged networks exhibited substantially increased X-ray attenuation coefficients, thus yielding significant contrast compared to the clinically approved X-ray contrast agent iohexol at the same concentrations. Additionally, our μ-CT studies revealed that these PBAs could be useful as dual-energy CT contrast agents for different biological specimens by using the lower varying scanning X-ray tube voltages. Finally, in vitro studies using U87-Luc cells treated with PBAs, including cellular CT imaging and bioluminescence cell viability assays, revealed that PBAs were taken up by the glioblastoma cells, with moderate biocompatibility at concentrations below the mM range

Mössbauer thermal scan study of a spin crossover system

Programmable Velocity equipment was used to perform a Mössbauer Thermal Scans to allow a quasi-continuous temperature study of the magnetic transition between the low-spin and a high-spin configurations in [Fe(Htrz)2(trz)](BF4) system. The material was studied both in bulk as in nanoparticles sample forms.Facultad de Ciencias ExactasInstituto de Física La PlataInstituto de Investigaciones Fisicoquímicas Teóricas y Aplicada

Conducting Anilate-Based Mixed-Valence Fe(II)Fe(III) Coordination Polymer: Small-polaron Hopping Model for Oxalate-Type Fe(II)Fe(III) 2D Networks

The mixed-valence FeIIFeIII 2D coordination polymer formulated as [TAG][FeIIFeIII(ClCNAn)3]·(solvate) 1 (TAG = tris(amino)-guanidinium, ClCNAn2− = chlorocyanoanilate dianionic ligand) crystallized in the polar trigonal space group P3. In the solid-state structure, determined both at 150 and at 10 K, anionic 2D honeycomb layers [FeIIFeIII(ClCNAn)3]− establish in the ab plane, with an intralayer metal−metal distance of 7.860 Å, alternating with cationic layers of TAG. The similar Fe−O distances suggest electron delocalization and an average oxidation state of +2.5 for each Fe center. The cation imposes its C3 symmetry to the structure and engages in intermolecular N−H···Cl hydrogen bonding with the ligand. Magnetic susceptibility characterization indicates magnetic ordering below 4 K and the presence of a hysteresis loop at 2 K with a coercive field of 60 Oe. Mössbauer measurements are in agreement with the existence of Fe(+2.5) ions at RT and statistic charge localization at 10 K. The compound shows semiconducting behavior with the in-plane conductivity of 2 × 10−3 S/cm, 3 orders of magnitude higher than the perpendicular one. A small-polaron hopping model has been applied to a series of oxalate-type FeIIFeIII 2D coordination polymers, providing a clear explanation on the much higher conductivity of the anilate-based systems than the oxalate ones

Mössbauer thermal scan study of a spin crossover system

Programmable Velocity equipment was used to perform a Mössbauer Thermal Scans to allow a quasi-continuous temperature study of the magnetic transition between the low-spin and a high-spin configurations in [Fe(Htrz)2(trz)](BF4) system. The material was studied both in bulk as in nanoparticles sample forms.Facultad de Ciencias ExactasInstituto de Física La PlataInstituto de Investigaciones Fisicoquímicas Teóricas y Aplicada

Enhanced Photoelectrochemical Water Splitting of Hematite Multilayer Nanowires Photoanode with Tuning Surface State via Bottom-up Interfacial Engineering

The optimization of multiple interfaces in hematite (α-Fe_2O_3) based composites for photoelectrochemical water splitting to facilitate charge transport in the bulk is of paramount importance to obtain enhanced solar-to-fuel efficiency. Herein, we report the fabrication of ITO/Fe_2O_3/Fe_2TiO_5/FeNiOOH multi-layer nanowires and a series of systematic experiments designed to elucidate the mechanism underlying the interfacial coupling effect of the quaternary hematite composite. The hierarchical ITO/Fe_2O_3/Fe_2TiO_5/FeNiOOH nanowires display photocurrents that are more than an order of magnitude greater than those of pristine Fe_2O_3 nanowires (from 0.205 mA cm^(−2) to 2.2 mA cm^(−2) at 1.23 V vs. RHE and 1 Sun), and higher than those of most of the recently reported state-of-the-art hematite composites. Structural, compositional and electrochemical investigations disclose that the surface states (SS) are finely regulated via the atomic addition of an Fe_2TiO_5 layer and FeNiOOH nanodots, while the upgrading of back contact conductivity and charge donor densities originate from the epitaxial relationship and enhanced Sn doping contributed from the ITO underlayer. We attribute the superior water oxidation performance to the interfacial coupling effect of the ITO underlayer (Sn doping and back contact conductivity promoter), the atomic level Fe_2TiO_5 coating (Ti doping, surface state density and energy level modulation) and the FeNiOOH nanodot electrocatalyst (regulating surface state energy level). Our work suggests an effective pathway for rational designing of highly active and cost-effective integrated photoanodes for photoelectrochemical water splitting

Pressure and Temperature Spin Crossover Sensors with Optical Detection

Iron(II) spin crossover molecular materials are made of coordination centres switchable between two states by temperature, pressure or a visible light irradiation. The relevant macroscopic parameter which monitors the magnetic state of a given solid is the high-spin (HS) fraction denoted nHS, i.e., the relative population of HS molecules. Each spin crossover material is distinguished by a transition temperature T1/2 where 50% of active molecules have switched to the low-spin (LS) state. In strongly interacting systems, the thermal spin switching occurs abruptly at T1/2. Applying pressure induces a shift from HS to LS states, which is the direct consequence of the lower volume for the LS molecule. Each material has thus a well defined pressure value P1/2. In both cases the spin state change is easily detectable by optical means thanks to a thermo/piezochromic effect that is often encountered in these materials. In this contribution, we discuss potential use of spin crossover molecular materials as temperature and pressure sensors with optical detection. The ones presenting smooth transitions behaviour, which have not been seriously considered for any application, are spotlighted as potential sensors which should stimulate a large interest on this well investigated class of materials