84 research outputs found

    Characterising the Apertif primary beam response

    Get PDF
    Context. Phased Array Feeds (PAFs) are multi element receivers in the focal plane of a telescope that make it possible to form simultaneously multiple beams on the sky by combining the complex gains of the individual antenna elements. Recently the Westerbork Synthesis Radio Telescope (WSRT) was upgraded with PAF receivers and carried out several observing programs including two imaging surveys and a time domain survey. The Apertif imaging surveys use a configuration, where 40 partially overlapping compound beams (CBs) are simultaneously formed on the sky and arranged in an approximately rectangular shape. Aims. This manuscript aims to characterise the response of the 40 Apertif CBs to create frequency-resolved, I, XX and YY polarization empirical beam shapes. The measured CB maps can be used for image deconvolution, primary beam correction and mosaicing of Apertif imaging data. Methods. We use drift scan measurements to measure the response of each of the 40 CBs of Apertif. We derive beam maps for all individual beams in I, XX and YY polarisation in 10 or 18 frequency bins over the same bandwidth as the Apertif imaging surveys. We sample the main lobe of the beams and the side lobes up to a radius of 0.6 degrees from the beam centres. In addition, we derive beam maps for each individual WSRT dish as well. Results. We present the frequency and time dependence of the beam shapes and sizes. We compare the compound beam shapes derived with the drift scan method to beam shapes derived with an independent method using a Gaussian Process Regression comparison between the Apertif continuum images and the NRAO VLA Sky Survey (NVSS) catalogue. We find a good agreement between the beam shapes derived with the two independent methods.Comment: Accepted for publication by A&A, 14 pages, 15 figure

    Characterising the Apertif primary beam response

    Get PDF
    Context. Phased array feeds (PAFs) are multi-element receivers in the focal plane of a telescope that make it possible to simultaneously form multiple beams on the sky by combining the complex gains of the individual antenna elements. Recently, the Westerbork Synthesis Radio Telescope (WSRT) was upgraded with PAF receivers to carry out several observing programs, including two imaging surveys and a time-domain survey. The Apertif imaging surveys use a configuration of 40 partially overlapping compound beams (CBs) simultaneously formed on the sky and arranged in an approximately rectangular shape. Aims. This work is aimed at characterising the response of the 40 Apertif CBs to create frequency-resolved I, XX, and YY polarization empirical beam shapes. The measured CB maps can be used for the image deconvolution, primary beam correction, and mosaicking processes of Apertif imaging data. Methods. We used drift scan measurements to measure the response of each of the 40 Apertif CBs. We derived beam maps for all individual beams in I, XX, and YY polarisation in 10 or 18 frequency bins over the same bandwidth as the Apertif imaging surveys. We sampled the main lobe of the beams and the side lobes up to a radius of 0.6 degrees from the beam centres. In addition, we derived beam maps for each individual WSRT dish. Results. We present the frequency and time dependence of the beam shapes and sizes. We compared the compound beam shapes derived with the drift scan method to beam shapes derived with an independent method using a Gaussian Process Regression comparison between the Apertif continuum images and the NRAO VLA Sky Survey (NVSS) catalogue. We find a good agreement between the beam shapes derived with the two independent methods

    The Primordial Binary Population - I: A near-infrared adaptive optics search for close visual companions to A star members of Scorpius OB2

    Get PDF
    We present the results of a near-infrared adaptive optics survey with the aim to detect close companions to Hipparcos members in the three subgroups of the nearby OB association Sco OB2: Upper Scorpius (US), Upper Centaurus Lupus (UCL) and Lower Centaurus Crux (LCC). We have targeted 199 A-type and late B-type stars in the Ks band, and a subset also in the J and H band. We find 151 stellar components other than the target stars. A brightness criterion is used to separate these components into 77 background stars and 74 candidate physical companion stars. Out of these 74 candidate companions, 41 have not been reported before (14 in US; 13 in UCL; 14 in LCC). Companion star masses range from 0.1 to 3 Msun. The mass ratio distribution follows f(q) = q^-0.33, which excludes random pairing. No close (rho < 3.75'') companion stars or background stars are found in the magnitude range 12 < Ks < 14. The lack of stars with these properties cannot be explained by low-number statistics, and may imply a lower limit on the companion mass of ~ 0.1 Msun. Close stellar components with Ks > 14 are observed. If these components are very low-mass companion stars, a gap in the companion mass distribution might be present. The small number of close low-mass companion stars could support the embryo-ejection formation scenario for brown dwarfs. Our findings are compared with and complementary to visual, spectroscopic, and astrometric data on binarity in Sco OB2. We find an overall companion star fraction of 0.52 in this association. This paper is the first step toward our goal to derive the primordial binary population in Sco OB2.Comment: 27 pages, to accepted by A&

    Dynamical Formation of Close Binary Systems in Globular Clusters

    Get PDF
    We know from observations that globular clusters are very efficient catalysts in forming unusual short-period binary systems or their offspring, such as low-mass X-ray binaries (LMXBs; neutron stars accreting matter from low-mass stellar companions), cataclysmic variables (CVs; white dwarfs accreting matter from stellar companions), and millisecond pulsars (MSPs; rotating neutron stars with spin periods of a few ms). Although there has been little direct evidence, the overabundance of these objects in globular clusters has been attributed by numerous authors to the high densities in the cores, which leads to an increase in the formation rate of exotic binary systems through close stellar encounters. Many such close binary systems emit X-radiation at low luminosities (L_x < 10^{34} erg/s) and are being found in large numbers through observations with the Chandra X-ray Observatory. Here we present conclusive observational evidence for a link between the number of close binaries observed in X-rays in a globular cluster and the stellar encounter rate of the cluster. We also make an estimate of the total number of LMXBs in globular clusters in our Galaxy.Comment: 11 pages, 1 b&w figure, 1 color figur

    Climate migration is about people, not numbers

    Get PDF
    It has become increasingly common to argue that climate change will lead to mass migrations. In this chapter, we examine the large numbers often invoked to underline alarming climate migration narratives. We outline the methodological limitations to their production. We argue for a greater diversity of knowledges about climate migration, rooted in qualitative and mixed methods. We also question the usefulness of numbers to progressive agendas for climate action. Large numbers are used for rhetorical effect to create fear of climate migration, but this approach backfires when they are used to justify security-oriented, anti-migrant agendas. In addition, quantification helps present migration as a management problem with decisions based on meeting quantitative targets, instead of prioritising peoples’ needs, rights, and freedoms

    New high precision orbital and physical parameters of the double-lined low-mass spectroscopic binary BY Draconis

    Get PDF
    We present the most precise to date orbital and physical parameters of the well known short period (P=5.975 d), eccentric (e=0.3) double-lined spectroscopic binary BY Draconis, a prototype of a class of late-type, active, spotted flare stars. We calculate the full spectroscopic/astrometric orbital solution by combining our precise radial velocities (RVs) and the archival astrometric measurements from the Palomar Testbed Interferometer (PTI). The RVs were derived based on the high resolution echelle spectra taken between 2004 and 2008 with the Keck I/HIRES, Shane/CAT/HamSpec and TNG/SARG telescopes/spectrographs using our novel iodine-cell technique for double-lined binary stars. The RVs and available PTI astrometric data spanning over 8 years allow us to reach 0.2-0.5% level of precision in M sin3(i) and the parallax but the geometry of the orbit (i=154 deg) hampers the absolute mass precision to 3.3%, which is still an order of magnitude better than for previous studies. We compare our results with a set of Yonsei-Yale theoretical stellar isochrones and conclude that BY Dra is probably a main sequence system more metal-rich than the Sun. Using the orbital inclination and the available rotational velocities of the components, we also conclude that the rotational axes of the components are likely misaligned with the orbital angular momentum. Given BY Dra's main sequence status, late spectral type and the relatively short orbital period, its high orbital eccentricity and probable spin-orbit misalignment are not in agreement with the tidal theory. This disagreement may possibly be explained by smaller rotational velocities of the components and the presence of a substellar mass companion to BY Dra AB.Comment: 10 pages, 7 figures, 4 tables, to appear in MNRA

    Chromatic periodic activity down to 120 MHz in a Fast Radio Burst

    Get PDF
    Fast radio bursts (FRBs) are extragalactic astrophysical transients whose brightness requires emitters that are highly energetic, yet compact enough to produce the short, millisecond-duration bursts. FRBs have thus far been detected between 300 MHz and 8 GHz, but lower-frequency emission has remained elusive. A subset of FRBs is known to repeat, and one of those sources, FRB 20180916B, does so with a 16.3 day activity period. Using simultaneous Apertif and LOFAR data, we show that FRB 20180916B emits down to 120 MHz, and that its activity window is both narrower and earlier at higher frequencies. Binary wind interaction models predict a narrower periodic activity window at lower frequencies, which is the opposite of our observations. Our detections establish that low-frequency FRB emission can escape the local medium. For bursts of the same fluence, FRB 20180916B is more active below 200 MHz than at 1.4 GHz. Combining our results with previous upper-limits on the all-sky FRB rate at 150 MHz, we find that there are 3-450 FRBs/sky/day above 50 Jy ms at 90% confidence. We are able to rule out the scenario in which companion winds cause FRB periodicity. We also demonstrate that some FRBs live in clean environments that do not absorb or scatter low-frequency radiation.Comment: 50 pages, 14 figures, 3 tables, submitte

    Repeating fast radio bursts with WSRT/Apertif

    Get PDF
    Context. Repeating fast radio bursts (FRBs) present excellent opportunities to identify FRB progenitors and host environments as well as to decipher the underlying emission mechanism. Detailed studies of repeating FRBs might also hold clues as to the origin of FRBs as a population. Aims. We aim to detect bursts from the first two repeating FRBs, FRB 121102 (R1) and FRB 180814.J0422+73 (R2), and to characterise their repeat statistics. We also want to significantly improve the sky localisation of R2 and identify its host galaxy. Methods. We used the Westerbork Synthesis Radio Telescope to conduct extensive follow-up of these two repeating FRBs. The new phased-array feed system, Apertif, allows one to cover the entire sky position uncertainty of R2 with fine spatial resolution in a single pointing. The data were searched for bursts around the known dispersion measures of the two sources. We characterise the energy distribution and the clustering of detected R1 bursts. Results. We detected 30 bursts from R1. The non-Poissonian nature is clearly evident from the burst arrival times, which is consistent with earlier claims. Our measurements indicate a dispersion measure (DM) of 563.5(2) pc cm(-3), suggesting a significant increase in DM over the past few years. Assuming a constant position angle across the burst, we place an upper limit of 8% on the linear polarisation fraction for the brightest burst in our sample. We did not detect any bursts from R2. Conclusions. A single power-law might not fit the R1 burst energy distribution across the full energy range or widely separated detections. Our observations provide improved constraints on the clustering of R1 bursts. Our stringent upper limits on the linear polarisation fraction imply a significant depolarisation, either intrinsic to the emission mechanism or caused by the intervening medium at 1400 MHz, which is not observed at higher frequencies. The non-detection of any bursts from R2, despite nearly 300 h of observations, implies either a highly clustered nature of the bursts, a steep spectral index, or a combination of the two assuming that the source is still active. Another possibility is that R2 has turned off completely, either permanently or for an extended period of time

    First release of Apertif imaging survey data

    Get PDF
    Context. Apertif is a phased-array feed system for the Westerbork Synthesis Radio Telescope, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program utilizing this upgrade started on 1 July 2019, with the last observations taken on 28 February 2022. The imaging survey component provides radio continuum, polarization, and spectral line data. Aims. Public release of data is critical for maximizing the legacy of a survey. Toward that end, we describe the release of data products from the first year of survey operations, through 30 June 2020. In particular, we focus on defining quality control metrics for the processed data products. Methods. The Apertif imaging pipeline, Apercal, automatically produces non-primary beam corrected continuum images, polarization images and cubes, and uncleaned spectral line and dirty beam cubes for each beam of an Apertif imaging observation. For this release, processed data products are considered on a beam-by-beam basis within an observation. We validate the continuum images by using metrics that identify deviations from Gaussian noise in the residual images. If the continuum image passes validation, we release all processed data products for a given beam. We apply further validation to the polarization and line data products and provide flags indicating the quality of those data products. Results. We release all raw observational data from the first year of survey observations, for a total of 221 observations of 160 independent target fields, covering approximately one thousand square degrees of sky. Images and cubes are released on a per beam basis, and 3374 beams (of 7640 considered) are released. The median noise in the continuum images is 41.4 uJy beam(-1), with a slightly lower median noise of 36.9 uJy beam(-1) in the Stokes V polarization image. The median angular resolution is 11.6 \u27\u27/sin delta. The median noise for all line cubes, with a spectral resolution of 36.6 kHz, is 1.6 mJy beam(-1), corresponding to a 3-sigma H i column density sensitivity of 1.8 x 10(20) atoms cm(-2) over 20 km s(-1) (for a median angular resolution of 24 \u27\u27 x 15 \u27\u27). Line cubes at lower frequency have slightly higher noise values, consistent with the global RFI environment and overall Apertif system performance. We also provide primary beam images for each individual Apertif compound beam. The data are made accessible using a Virtual Observatory interface and can be queried using a variety of standard tools
    corecore