89 research outputs found
Optimized FRP Wrapping Schemes for Circular Concrete Columns under Axial Compression
This study investigates the behavior and failure modes of fiber-reinforced polymer (FRP) confined concrete wrapped with different FRP schemes, including fully wrapped, partially wrapped, and nonuniformly-wrapped concrete cylinders. By using the same amount of FRP, this study proposes a new wrapping scheme that provides a higher compressive strength and strain for FRP-confined concrete, in comparison with conventional fully wrapping schemes. A total of 33 specimens were cast and tested, with three of these specimens acting as reference specimens and the remaining specimens wrapped with different types of FRP (CFRP and GFRP) by different wrapping schemes. For specimens that belong to the descending branch type, the partially-wrapped specimens had a lower compressive strength but a higher axial strain as compared to the corresponding fully-wrapped specimens. In addition, the nonuniformly-wrapped specimens achieved both a higher compressive strength and axial strain in comparison with the fully-wrapped specimens. Furthermore, the partially-wrapping scheme changes the failure modes of the specimens and the angle of the failure surface. A new equation that can be used to predict the axial strain of concrete cylinders wrapped partially with FRP is proposed
Creep and residual properties of cracked macro-synthetic fibre reinforced concretes
[EN] This study analysed the creep behaviour of five concretes incorporating 0.5% by volume of four macro-synthetic fibres (MSFs) and one steel fibre. After 28 d moist curing, prisms were pre-loaded up to a crack opening of 0.5 mm and held for 90 d in three different environments - ambient laboratory air, seawater at 45 degrees C and air flow at 45 degrees C. Sustained loads were then applied on three specimens from each group while the other prisms remained unloaded. The remaining residual capacity was evaluated by bending tests. It was concluded that the residual capacity of cracked MSF concretes is not affected by long-term loading.The authors wish to thank the technicians of ICITECH, where the experimental work was developed. The financial support of the project FISNE with reference BIA2012-35776, supported by the Spanish Ministry of Economy and Competiveness and the FEDER fund, is also gratefully acknowledged. The doctoral scholarship of M. E. Bossio was supported by the project EuroTANGO (European Commission - EACEA).Serna Ros, P.; MartĂ Vargas, JR.; Bossio, ME.; Zerbino, R. (2016). Creep and residual properties of cracked macro-synthetic fibre reinforced concretes. Magazine of Concrete Research. 68(4):197-207. https://doi.org/10.1680/macr.15.00111S19720768
Flexural strengthening of RC continuous slab strips using NSM CFRP laminates
To assess the effectiveness of the near surface mounted (NSM) technique, in terms of load carrying and moment
redistribution capacities, for the flexural strengthening of continuous reinforced concrete (RC) slabs, an
experimental program was carried out. The experimental program is composed of three series of three slab strips of
two equal span length, in order to verify the possibility of increasing the negative (at the intermediate support
region) resisting bending moment in 25% and 50% and maintaining moment redistribution levels of 15%, 30% and
45%. Though the flexural resistance of the NSM strengthened sections has exceeded the target values, the moment
redistribution was relatively low, and the increase of the load carrying capacity of the strengthened slabs did not
exceed 25%. This experimental program is analyzed to highlight the possibilities of NSM technique for statically
indeterminate RC slabs in terms of flexural strengthening effectiveness, moment redistribution and ductility
performance. Using a FEM-based computer program, which predictive performance was appraised using the
obtained experimental results, a high effective NSM flexural strengthening strategy is proposed, capable of
enhancing the slabâs load carrying capacity and maintaining high levels of ductility.The study reported in this paper forms a part of the research program "CUTINEMO - Carbon fiber laminates applied according to the near surface mounted technique to increase the flexural resistance to negative moments of continuous reinforced concrete structures" supported by FCT, PTDC/ECM/73099/2006. The authors wish to acknowledge the support also provided by the S&P, Casais and Artecanter Companies. The first Author acknowledges the financial support of National Council for Scientific and Technological Development (CNPq) - Brazil, Ph.D. Grant no. 200953/2007-9. The second Author wishes to acknowledge the support provided by FCT, by means of the SFRH/BSAB/818/2008 and SFRH/BSAB/913/2009 sabbatical grants
Shear strengthening of concrete members with TRM jackets: Effect of shear span-to-depth ratio, material and amount of external reinforcement
An experimental work on reinforced concrete (RC) rectangular beams strengthened in shear with textile reinforced mortar (TRM) jackets is presented in this paper, with focus on the following investigated parameters: (a) the amount of external TRM reinforcement ratio, Ïf, by means of using different number of textile layers and different types of textile fibre materials (carbon, glass, basalt); (b) the textile geometry, and (c) the shear span-to-depth ratio, a/d. In total, 22 tests were conducted on simply supported rectangular RC beams under (three-point bending) monotonic loading. The experimental results revealed that: (1) TRM is very effective when the failure is attributed to debonding of the TRM jacket from the concrete substrate; (2) the trend of effective strains for carbon, glass and basalt TRM jackets is descending for increasing values of the TRM reinforcement ratio, Ïf, when failure is associated to debonding of the jacket; (3) the effect of textile geometry is significant only for low values of Ïf, resulting in variances in the capacity enhancement and the failure modes, and (4) the shear span-to-depth ratio has practically no effect to the failure mode nor to the TRM jacket contribution to the total shear resistance of the RC beams
The theoretical principles of the critical shear crack theory for punching shear failures and derivation of consistent closed-form design expressions
An experimental and analytical investigation of reinforced concrete beam-column joints strengthened with a range of CFRP schemes applied only to the beam
This paper investigates the experimental and analytical behaviour of beam-column joints that are subjected to a combination of torque, flexural and direct shear forces, where different Carbon Fibre Polymer (CFRP) strengthening wraps have been applied only to the beam. These wrapping schemes have previously been determined by the research community as an effective method of enhancing the torsional capacities of simply supported reinforced concrete beams. In this investigation, four 3/4-scale exterior beam-column joints were subjected to combined monotonic loading; three different beam wrapping schemes were employed to strengthen the beam region of the joint. The paper suggests a series of rational formulae, based on the space truss mechanism, which can be used to evaluate the joint shear demand of the beams wrapped in these various ways. Further, an iterative model, based on the average stress-strain method, has been introduced to predict joint strength. The proposed analytical approaches show good agreement with the experimental results. The experimental outcomes along with the adopted analytical methods reflect the consistent influence of the wrapping ratio, the interaction between the combined forces, the concrete strut capacity and the fibre orientation on the joint forces, the failure mode and the distortion levels. A large rise in the strut force resulting from shear stresses generated from this combination of forces is demonstrated and leads to a sudden-brittle failure. Likewise, increases in the beamsâ main steel rebar strains are identified at the column face, again influenced by the load interactions and the wrapping systems used
Glass macrofiber selfâcompacting concrete: Fiber distribution and mechanical properties in thin walls and slabs
An Enhanced UHPC-Grout Shear Connection for Steel-Concrete Composite Bridges with Precast Decks
Fire design of concrete structures: structural behaviour and assessment: state-of-the-art report
- âŠ