Ten millennia of hepatitis B virus evolution

Hepatitis B virus (HBV) has been infecting humans for millennia and remains a global health problem, but its past diversity and dispersal routes are largely unknown. We generated HBV genomic data from 137 Eurasians and Native Americans dated between ~10,500 and ~400 years ago. We date the most recent common ancestor of all HBV lineages to between ~20,000 and 12,000 years ago, with the virus present in European and South American hunter-gatherers during the early Holocene. After the European Neolithic transition, Mesolithic HBV strains were replaced by a lineage likely disseminated by early farmers that prevailed throughout western Eurasia for ~4000 years, declining around the end of the 2nd millennium BCE. The only remnant of this prehistoric HBV diversity is the rare genotype G, which appears to have reemerged during the HIV pandemic

Natural Volcanic Material as a Sustainable Photocatalytic Material for Pollutant Degradation under Solar Irradiation

Recently, photocatalysis has been demonstrated as a solid approach for efficient wastewater cleaning. Using natural materials as photocatalysts means a promising solution to develop green catalysts for environmental purposes. This work aimed to study the suitability of a natural volcanic material (La Gomera, Canary Islands, Spain) as a photocatalytic material for the degradation of pollutants in wastewater with solar energy. After analysing the properties of the natural material (BET surface 0.188 m2/g and band-gap of 3 eV), the photocatalytic activity was evaluated at laboratory and pilot plant scale for the degradation of methylene blue (MB) in water (50 mg L−1), at 20 °C, during a period of 4 h, under UV/Vis light and solar irradiation. Photolytic and adsorption studies were developed to distinguish the photocatalytic contribution to the wastewater decontamination process by photocatalysis. Our results enable us to determine the viability of black sand as a photocatalytic material activated by solar irradiation (photodegradation of MB up to 100% by using solar energy), developing a natural and green photocatalytic system with significantly high potential for application in a sustainable wastewater cleaning process

Phonolite Material as Catalyst Support for the Hydrotreatment of Gas Oil and Vegetable Oil Type Feedstocks

Phonolite material has shown to be promising catalyst support for the deoxygenation of triglycerides. In this work, we continue with our previous research by synthesising and testing three acid-treated phonolite-supported Co-Mo, Ni-Mo and Ni-W catalysts for the hydrotreating of atmospheric gas oil and co-processing with rapeseed oil at industrial operating conditions (350–370 °C, WHSV 1–2 h−1, 5.5 MPa) in the continuous regime for more than 270 h. The phonolite-supported catalysts showed hydrotreating activity comparable with commercial catalysts, together with a complete conversion of triglycerides into n-alkanes. During co-processing, the Ni-promoted catalyst showed strong stability, with similar activity previous to the rapeseed oil addition. Our results enable us to evaluate the suitability of phonolite as catalyst support for the development of plausible alternatives to conventional hydrotreating catalysts for the co-processing of middle distillates with vegetable oils

Hydrocracking of Heavy Fischer–Tropsch Wax Distillation Residues and Its Blends with Vacuum Gas Oil Using Phonolite-Based Catalysts

The Fischer–Tropsch heavy fraction is a potential feedstock for transport-fuels production through co-processing with fossil fuel fraction. However, there is still the need of developing new and green catalytic materials able to process this feedstock into valuable outputs. The present work studies the co-hydrocracking of the Fisher–Tropsch heavy fraction (FT-res.) with vacuum gas oil (VGO) at different ratios (FT-res. 9:1 VGO, FT-res. 7:3 VGO, and FT-res. 5:5 VGO) using phonolite-based catalysts (5Ni10W/Ph, 5Ni10Mo/Ph, and 5Co10Mo/Ph), paying attention to the overall conversion, yield, and selectivity of the products and properties. The co-processing experiments were carried out in an autoclave reactor at 450 °C, under 50 bars for 1 and 2 h. The phonolite-based catalysts were active in the hydrocracking of FT-res.:VGO mixtures, presenting different yields to gasoline, diesel, and jet fuel fractions, depending on the time of reaction and type of catalyst. Our results enable us to define the most suitable metal transition composition for the phonolite-based support as a hydrocracking catalyst

Direct Polypropylene and Polyethylene Liquefaction in CO₂ and N₂ Atmospheres Using MgO Light and CaO as Catalysts

The polyolefin to lighter molecules reaction reduces the waste-plastic residues to produce fuels and valuable chemicals. Commercial MgO light and CaO were used as catalysts for the direct polyethylene and polypropylene liquefaction in N2 or CO2 atmospheres. The products were analyzed (ATR-FTIR, GC-FID/TCD, GC-FID, density, refractive index). The use of MgO light and CaO improved the conversion of propylene and ethylene to liquid products. In addition, low gaseous and solid products yields were obtained. A good production of organic liquids in the gasoline, diesel and kerosene boiling range was obtained. The use of CO2, in some cases, led to a higher conversion into liquids compared with the reactions performed in the N2 atmosphere. In addition, the use of the CO2 atmosphere led to a higher content of products with a boiling range in the diesel and kerosene ranges

Brewing Beer from Malt Extract as University Laboratory Experiment to Enhance Chemical Engineering Learning Outcomes Understanding

Brewing beer is one of the most popular food processes in the current society, and it has been widely used as a learning course at many universities. However, most laboratory experiences take a very long time for development. In this work, we discuss the brewing process from malt extract as an intelligent way to reduce the timing for implementation by simplifying some of its stages, such as malting or mashing, but remaining the same core process. During brewing with malt extract, the students deal with this multidisciplinary process, enhancing primary learning outcomes related to the unit operations of chemical engineering applied to the food industry. At the university level, the addition of brewing as a laboratory experiment might directly affect the productive fabric of the area through the development of new beer-related businesses