Morphology and Orientation Selection of Non-Metallic Inclusions in Electrified Molten Metal

The effect of electric current on morphology and orientation selection of non-metallic inclusions in molten metal has been investigated using theoretical modelling and numerical calculation. Two geometric factors, namely the circularity (fc) and alignment ratio (fe) were introduced to describe the inclusions shape and configuration. Electric current free energy was calculated and the values were used to determine the thermodynamic preference between different microstructures. Electric current promotes the development of inclusion along the current direction by either expatiating directional growth or enhancing directional agglomeration. Reconfiguration of the inclusions to reduce the system electric resistance drives the phenomena. The morphology and orientation selection follows the routine to reduce electric free energy. The numerical results are in agreement with our experimental observations

Oxygen tri-clusters make glass highly crack-resistant

Identifying key structural factors that surmount their intrinsic brittleness and poor crack initiation resistance (CR) is crucial for designing glass efficiently and predictably. In this study, we present three significant discoveries that contribute to the design of glasses with superior mechanical performances. Firstly, the CR of the aluminosilicate glasses exhibited a drastic increase when the alumina content surpasses a critical threshold. Secondly, the fraction of three-coordinated oxygens (i.e., oxygen tri-cluster fraction [(3)O]) was successfully quantified using our new Nuclear Magnetic Resonance technique. Thirdly, a correlation between the evolution trend of the [(3)O] and the alumina content was established, which aligns closely with the CR trend. These findings suggest that oxygen tri-clusters play a crucial role in significantly enhancing CR in aluminosilicate glasses.</p

A Spectrum Efficient Self-Admission Framework for Coexisting IEEE 802.15.4 Networks under Heterogeneous Traffics

Due to the limited bandwidth resource and the interference among networks, it is challengeable to coordinate the bandwidth resource of multiple IEEE 802.15.4-based wireless personal area networks (WPANs) with heterogeneous traffics, especially in a distributed mode. In this paper, to handle this problem, we first propose a renewal carrier sense multiple access (CSMA)-based self-admission access mechanism for coexisting WPANs in order to maximize the frequency resource utilization and satisfy the diverse rate requirements of heterogeneous traffics. Secondly, we propose the time-space-hard core point process (TS-HCPP) to abstract the renewal CSMA-based self-admission access process for the IEEE 802.15.4 network with multi-channels. TS-HCPP considers the correlation of time and space, and appropriately judges the strong interference between coexisting WPANs, which can solve the density underestimation problems of traditional HCPP. Finally, relying on the TS-HCPP, we obtain the optimum combination of access parameters, which meets the minimum service rate requirements for heterogeneous traffics and maximizes the frequency resource utilization. The simulation results show that the density of coexisting WPANs evaluated by the TS-HCPP matches the experimental results, and an improvement in spectral efficiency of coexisting WPANs can be achieved in our proposed self-admission framework

Effects of yeast culture on broiler growth performance, nutrient digestibility and caecal microbiota

This study was conducted to evaluate the effects of yeast culture (YC) supplementation on the growth performance, apparent nutrient digestibility and caecal microflora of broiler chickens. A total of 360 one-day-old Arbor Acres broiler chickens were randomly assigned to six dietary treatments containing 0.2%, 0.4%, 0.6%, 0.8% and 1% YC. The experiment lasted for 42 days. Diet and faecal samples were collected for analysis of dry matter, crude protein, ether extract, calcium and phosphorus. Caecal microbiota on days 21 and 42 were measured using polymerase chain reaction-denaturing gradient gel electrophoresis (PCR-DGGE) and real-time PCR. Dietary supplementation with YC did not affect feed intake. On day 42, the 0.8% YC group showed optimal growth and feed efficiency, as well as higher levels of apparent digestibility of ether extract, calcium and phosphorus. On day 21, both 0.8% and 1% YC groups exhibited a significant increase in Ruminococcus, Propionibacterium clostridiales, and Bifidobacterium density. The density of Bacteroides in the YC groups was significantly higher than that of the control group. On day 42, the densities of Bacteroides, Sphingomonas and Bifidobacterium were higher in the 0.8% YC group, whereas a significant decrease was observed in the number of Enterobacteriaceae. These results serve as evidence that dietary supplementation with 0.8% YC not only moderately optimized the feed efficiency and the apparent digestibility of ether extract, calcium and phosphorus, but also positively influenced the caecal bacterial density and diversity in broiler chickens.Keywords: Arbor Acres broiler, caecal microflora, yeast culture supplementatio

Magnetic phase diagram in Eu1−x_{1-x}Lax_xFe2_2As2_2 single crystals

We have systematically measured resistivity, susceptibility and specific heat under different magnetic fields (H) in Eu$_{1-x}$La$_x$Fe$_2$As$_2$ single crystals. It is found that a metamagnetic transition from A-type antiferromagnetism to ferromagnetism occurs at a critical field for magnetic sublattice of $Eu^{2+}$. The jump of specific heat is suppressed and shifts to low temperature with increasing H up to the critical value, then shifts to high temperature with further increasing H. Such behavior supports the metamagnetic transition. Detailed H-T phase diagrams for x=0 and 0.15 crystals are given, and possible magnetic structure is proposed. Magnetoresistance measurements indicate that there exists a strong coupling between local moment of $Eu^{2+}$ and charge in Fe-As layer. These results are very significant to understand the underlying physics of FeAs superconductors.Comment: 5 pages, 4 figure

Magnetoresistance Effect in Spin-Polarized Junctions of Ferromagnetically Contacting Multiple Conductive Paths: Applications to Atomic Wires and Carbon Nanotubes

For spin-polarized junctions of ferromagnetically contacting multiple conductive paths, such as ferromagnet (FM)/atomic wires/FM and FM/carbon nanotubes/FM junctions, we theoretically investigate spin-dependent transport to elucidate the intrinsic relation between the number of paths and conduction, and to enhance the magnetoresistance (MR) ratio. When many paths are randomly located between the two FMs, electronic wave interference between the FMs appears, and then the MR ratio increases with increasing number of paths. Furthermore, at each number of paths, the MR ratio for carbon nanotubes becomes larger than that for atomic wires, reflecting the characteristic shape of points in contact with the FM.Comment: 7 pages, 3 figures, accepted for publication in Phys. Rev.

Large extraordinary Hall effect in [Pt/Co]5/Ru/[Co/Pt]5 multilayer

This Brief Report presents giant extraordinary Hall effect (EHE) in the Ru-mediated antiferromagnetically coupled [Pt/Co]5/Ru/[Co/Pt]5 multilayers (MLs) compared with those MLs without the Ru spacer. The enhancement of the EHE is attributed to the strong Ru/Co interface scattering. Through the variation in the Pt layer thickness and the temperature, we determine the relation between the Hall voltage and the longitudinal resistivity. It is found that the conventional scaling analysis has difficulties in consistently interpreting our data

Transport Measurements on Nano-engineered Two Dimensional Superconducting Wire Networks

Superconducting triangular Nb wire networks with high normal-state resistance are fabricated by using a negative tone hydrogen silsesquioxane (HSQ) resist. Robust magnetoresistance oscillations are observed up to high magnetic fields and maintained at low temperatures, due to the eective reduction of wire dimensions. Well-defined dips appear at integral and rational values (1/2, 1/3, 1/4) of the reduced flux f = Phi/Phi_0, which is the first observation in the triangular wire networks. These results are well consistent with theoretical calculations for the reduced critical temperature as a function of f.Comment: 4 pages, 3 figure

Quantitative trait loci for the diurnal flag leaf starch content during the early grain-filling stage in wheat (Triticum aestivum L.)

Starch is a product of photosynthetic activities in leaves. Wheat yields largely depend on photosynthetic carbon fixation and carbohydrate metabolism in flag leaves. The mapping of quantitative trait loci (QTLs) associated with flag leaf starch content (FLSC) in wheat (Triticum aestivum L.) was completed using unconditional and conditional QTL analyses. The FLSC of this population during the early grain-filling stage was measured at six stages in six environments. Combining unconditional and conditional QTL mapping methods, eight unconditional QTLs and nine conditional QTLs were detected, with five QTLs identified as unconditional and conditional QTLs. Four unconditional QTLs (i.e. qFLS-1B, qFLS-1D-1, qFLS-4A, and qFLS-7D-1) and one conditional QTL (i.e. qFLS-3A-1) were identified in two of six environments. Two QTLs (qFLS-1D-2 and qFLS-7D-1), which significantly affected the FLSC, were identified using the unconditional QTL mapping method, while three QTLs (i.e. qFLS-1A, qFLS-3A-1, and qFLS-7D-1) were detected using the conditional QTL mapping method. Our findings provide new insights into the genetic mechanism and regulatory network underlying the diurnal FLSC in wheat

Top-illuminated dye-sensitized solar cells with a room-temperature- processed ZnO photoanode on metal substrates and a Pt-coated Ga-doped ZnO counter electrode

We report on top-illuminated, fluorine tin oxide/indium tin oxide-free (FTO/ITO-free), dye-sensitized solar cells (DSCs) using room-temperature- processed ZnO layers on metal substrates as the working electrodes and Pt-coated Ga-doped ZnO layers (GZO) as the counter electrodes. These top-illuminated DSCs with GZO render comparable efficiency to those employing commercial FTO counter electrodes. Despite a lower current density, the top-illuminated DSCs result in a higher fill factor than conventional DSCs due to a low ohmic loss at the electrode/semiconductor interface. The effect of metal substrate on the performance of the resulting top-illuminated DSCs is also studied by employing various metals with different work functions. Ti is shown to be a suitable metal to be used as the working electrode in the top-illuminated device architecture owing to its low ohmic loss at the electrode/semiconductor interface, minimum catalytic activity on redox reactions and high resistance to corrosion by liquid electrolytes. © 2011 IOP Publishing Ltd