Cubic di-μ-amido-bis[bis(η5-cyclopentadienyl)ytterbium(III)]

The title compound, [Yb2(C5H5)4(NH2)2], was synthesized in a Parr high-pressure vessel starting from monoclinic [Cp2YbNH2]2 (where Cp = cyclopentadienyl). The complex is located on a special position of site symmetry mmm with just an eighth of the complex in the asymmetric unit. The Yb atom is in a distorted tetrahedral coordination environment, coordinated by two cyclopentadienyl rings and two amino groups forming a dimeric complex bridged through the amino groups. This compound represents the high-pressure cubic modification of monoclinic [Cp2YbNH2]2 obtained at 250 bar (1 bar = 105 Pa) under an atmosphere of argon

One-Pot Synthesis of Single-Source Precursors for Nanocrystalline LED Phosphors M2Si5N8:Eu2+ (M = Sr, Ba)

Highly efficient red-emitting nitridosilicate phosphors Sr2Si5N8:Eu2+ and Ba1.5Sr0.5Si5N8:Eu2+ (doping level 1%) applicable to phosphor converted pc-LEDs were synthesized in nanocrystalline form at low temperatures employing a novel single-source precursor approach. Synthesis starts from nanocrystalline silicon and uses mixed metal amides M(NH2)2 with M = Sr, Ba, Eu as reactive intermediates. In a second approach, a single-source precursor mixture obtained from a one-pot reaction of the corresponding elements (Sr/Ba, Eu, Si) was obtained in supercritical ammonia. Thermoanalytical in situ investigations gain a deeper insight into the degradation mechanism of the mixed metal amide precursors and revealed the onset for the formation of the 2-5-8 phosphor materials at temperatures slightly above 900°C. Formation of the products is complete below 1400°C. Under these conditions, the nitridosilicate phosphors form spherically shaped particles with crystallites of 200 nm in size. Spherical particles are desirable for phosphor application because light extraction may be improved by decreased light trapping and re-absorption losses. As a major advantage of the one-pot precursor approach, the exact Sr/Ba content in the solid solution series Sr2−xBaxSi2N8:Eu2+ and the doping concentration of Eu2+ can easily be controlled in a wide range by the relative amount of the elemental starting materials (Sr, Ba, Eu, Si). Simultaneously, thorough mixing of these elements down to an atomic level (Sr, Ba, Eu) or at least at nanoscopic dimensions (silicon) is achieved by the solution approach. As a consequence, no milling and pre-reaction steps are necessary which might give rise to contamination. Advantageously, this approach can easily be extended to large-scale processes by simultaneously preserving complete mixing. Furthermore, the influence of the starting materials (single-source precursor, nanocrystalline silicon) and the reaction conditions on the crystal shape and finally on the luminescence properties of the products was investigated. The obtained nanophosphors exhibit luminescence properties comparable to coarsely crystalline nitridosilicate phosphor powders prepared by conventional high-temperature processing

Synthesis, Structure, and Dynamics of Tris(η5-cyclopentadienyl)lanthanides and Bis(η5-cyclopentadienyl)[bis(trimethylsilyl)amido]cerium(III)

The crystal structures of tris(η5-cyclopentadienyl)lanthanides (Ln = Ce, Dy, Ho) have been determined using different X-ray diffraction methods. Cp3Ce and Cp3Ho (Cp = cyclopentadienyl) crystal data needed special solution and refinement methods, due to the occurrence of intrinsic twinning in these species. Our results do not agree with the previously published cell constants of Cp3Ho. The space group and unit cell parameters of Cp3Dy have been derived from powder diffraction experiments. High-resolution 13C solid-state NMR data of Cp3La are presented, giving evidence of the dynamics and bonding situation of the Cp ligands. Cp3Ce turned out to be a reactive reagent for the synthesis of bis(η5-cyclopentadienyl)[bis(trimethylsilyl)amido]cerium(III)

Mixed Valence Europium Nitridosilicate Eu2SiN3

The mixed valence europium nitridosilicate Eu2SiN3 has been synthesized at 900°C in welded tantalum ampules starting from europium and silicon diimide Si(NH)2 in a lithium flux. The structure of the black material has been determined by single-crystal X-ray diffraction analysis (Cmca (no. 64), a=542.3(11) pm, b=1061.0(2) pm, c=1162.9(2) pm, Z=8, 767 independent reflections, 37 parameters, R1=0.017, wR2=0.032). Eu2SiN3 is a chain-type silicate comprising one-dimensional infinite nonbranched zweier chains of corner-sharing SiN4 tetrahedra running parallel [100] with a maximum stretching factor fs=1.0. The compound is isostructural with Ca2PN3 and Rb2TiO3, and it represents the first example of a nonbranched chain silicate in the class of nitridosilicates. There are two crystallographically distinct europium sites (at two different Wyckoff positions 8f) being occupied with Eu2+ and Eu3+, respectively. 151Eu Mössbauer spectroscopy of Eu2SiN3 differentiates unequivocally these two europium atoms and confirms their equiatomic multiplicity, showing static mixed valence with a constant ratio of the Eu2+ and Eu3+ signals over the whole temperature range. The Eu2+ site shows magnetic hyperfine field splitting at 4.2 K. Magnetic susceptibility measurements exhibit Curie-Weiss behavior above 24 K with an effective magnetic moment of 7.5 μB/f.u. and a small contribution of Eu3+, in accordance with Eu2+ and Eu3+ in equiatomic ratio. Ferromagnetic ordering at unusually high temperature is detected at TC=24 K. DFT calculations of Eu2SiN3 reveal a band gap of ∼0.2 eV, which is in agreement with the black color of the compound. Both DFT calculations and lattice energetic calculations (MAPLE) corroborate the assignment of two crystallographically independent Eu sites to Eu2+ and Eu3+

Cs10Ta29.27O78

Single crystals of caesium tantalate(V), Cs10Ta29.27O78, were obtained as a serendipitous product in a welded tantalum ampoule by a blank reaction of CsBr and bis­muth subnitrate [Bi5O(OH)9(NO3)4] with the container material. The crystal structure of the title compound is made up of a three-dimensional framework constituted by two types of layers, viz. (Ta6O15)n and (Ta3O9)n, parallel to (001), which are linked together by TaO6 octa­hedra (3m. symmetry) along [001]. This framework has cavities where three independent Cs+ ions (3m. and m2 symmetry, respectively) are located. The compound reveals a Ta deficiency at one trigonal prismatic coordinated site ( m2 symmetry). The composition of the title compound was verified by energy-dispersive X-ray analysis of single crystals

Frontal lobe connectivity and network community characteristics are associated with the outcome of subthalamic nucleus deep brain stimulation in patients with Parkinson's disease

Deep brain stimulation (DBS) of the subthalamic nucleus (STN) is nowadays an evidence-based state of the art therapy option for motor and non-motor symptoms in patients with Parkinson’s disease (PD). However, the exact anatomical regions of the cerebral network that are targeted by STN–DBS have not been precisely described and no definitive pre-intervention predictors of the clinical response exist. In this study, we test the hypothesis that the clinical effectiveness of STN–DBS depends on the connectivity profile of the targeted brain networks. Therefore, we used diffusion-weighted imaging (DWI) and probabilistic tractography to reconstruct the anatomical networks and the graph theoretical framework to quantify the connectivity profile. DWI was obtained pre-operatively from 15 PD patients who underwent DBS (mean age = 67.87 ± 7.88, 11 males, H&Y score = 3.5 ± 0.8) using a 3T MRI scanner (Philips Achieva). The pre-operative connectivity properties of a network encompassing frontal, prefrontal cortex and cingulate gyrus were directly linked to the postoperative clinical outcome. Eccentricity as a topological-characteristic of the network defining how cerebral regions are embedded in relation to distant sites correlated inversely with the applied voltage at the active electrode for optimal clinical response. We found that network topology and pre-operative connectivity patterns have direct influence on the clinical response to DBS and may serve as important and independent predictors of the postoperative clinical outcome

Giant nonlinear optical activity of achiral origin in planar metasurfaces with quadratic and cubic nonlinearities

3D chirality is shown to be unnecessary for introducing strong circular dichroism for harmonic generations. Specifically, near-unity circular dichroism for both second-harmonic generation and third-harmonic generations is demonstrated on suitably designed ultrathin plasmonic metasurfaces with only 2D planar chirality. The study opens up new routes for designing chip-type biosensing platform, which may allow for highly sensitive detection of bio- and chemical molecules with weak chirality

On the Breeds of Cattle—Historic and Current Classifications

Classification of cattle breeds contributes to our understanding of the history of cattle and is essential for an effective conservation of genetic diversity. Here we review the various classifications over the last two centuries and compare the most recent classifications with genetic data. The classifications devised during the 19th to the late 20th century were in line with the Linnaean taxonomy and emphasized cranial or horn morphology. Subsequent classifications were based on coat color, geographic origin or molecular markers. Several theories were developed that linked breed characteristics either to a supposed ancestral aurochs subspecies or to a presumed ethnic origin. Most of the older classifications have now been discarded, but have introduced several Latin terms that are still in use. The most consistent classification was proposed in 1995 by Felius and emphasizes the geographic origin of breeds. This is largely in agreement with the breed clusters indicated by a biochemical and molecular genetic analysis, which reflect either groups of breeds with a common geographic origin or single breeds that have expanded by export and/or crossbreeding. We propose that this information is also relevant for managing the genetic diversity of cattl

D* Production in Deep Inelastic Scattering at HERA

This paper presents measurements of D^{*\pm} production in deep inelastic scattering from collisions between 27.5 GeV positrons and 820 GeV protons. The data have been taken with the ZEUS detector at HERA. The decay channel $D^{*+}\to (D^0 \to K^- \pi^+) \pi^+$ (+ c.c.) has been used in the study. The $e^+p$ cross section for inclusive D^{*\pm} production with $5<Q^2<100 GeV^2$ and $y<0.7$ is 5.3 \pms 1.0 \pms 0.8 nb in the kinematic region {$1.3<p_T(D^{*\pm})<9.0$ GeV and $| \eta(D^{*\pm}) |<1.5$}. Differential cross sections as functions of p_T(D^{*\pm}), $\eta(D^{*\pm}), W$ and $Q^2$ are compared with next-to-leading order QCD calculations based on the photon-gluon fusion production mechanism. After an extrapolation of the cross section to the full kinematic region in p_T(D^{*\pm}) and $\eta$(D^{*\pm}), the charm contribution $F_2^{c\bar{c}}(x,Q^2)$ to the proton structure function is determined for Bjorken $x$ between 2 $\cdot$ 10$^{-4}$ and 5 $\cdot$ 10$^{-3}$.Comment: 17 pages including 4 figure