Rehabilitation goals of people with spinal cord injuries can be classified against the International Classification of Functioning, Disability and Health Core Set for spinal cord injuries

Objectives: To establish whether inter-professional rehabilitation goals from people with non-traumatic spinal cord injury (SCI) can be classified against the International Classification of Functioning, Disability and Health (ICF) SCI Comprehensive and Brief Core Sets early postacute situation. Setting: Neurological rehabilitation unit. Methods: Rehabilitation goals of 119 patients with mainly incomplete and non-traumatic SCIs were classified against the ICF SCI Core Sets following established linking rules. Results: A total of 119 patients generated 1509 goals with a mean (and s.d.) of 10.5 (9.1) goals per patient during the course of their inpatient rehabilitation stay. Classifying the 1509 rehabilitation goals against the Comprehensive ICF Core Set generated 2909 ICF codes. Only 69 goals (4.6%) were classified as ‘not definable (ND)’. Classifying the 1509 goals against the Brief ICF Core Set generated 2076 ICF codes. However, 751(49.8%) of these goals were classified as ‘ND’. In the majority of goals (95.7%), the ICF code description was not comprehensive enough to fully express the goals set in rehabilitation. In particular, the notion of quality of movement or specificity and measurability aspects of a goal (usually described with the criteria and acronyms SMART) could not be expressed through the ICF codes. Conclusion: Inter-professional rehabilitation goals can be broadly described by the ICF Comprehensive Core Set for SCI but not the Brief Core Set

Impaired respiratory burst contributes to infections in PKCδ-deficient patients

Patients with autosomal recessive protein kinase C δ (PKCδ) deficiency suffer from childhood-onset autoimmunity, including systemic lupus erythematosus. They also suffer from recurrent infections that overlap with those seen in patients with chronic granulomatous disease (CGD), a disease caused by defects of the phagocyte NADPH oxidase and a lack of reactive oxygen species (ROS) production. We studied an international cohort of 17 PKCδ-deficient patients and found that their EBV-B cells and monocyte-derived phagocytes produced only small amounts of ROS and did not phosphorylate p40phox normally after PMA or opsonized Staphylococcus aureus stimulation. Moreover, the patients' circulating phagocytes displayed abnormally low levels of ROS production and markedly reduced neutrophil extracellular trap formation, altogether suggesting a role for PKCδ in activation of the NADPH oxidase complex. Our findings thus show that patients with PKCδ deficiency have impaired NADPH oxidase activity in various myeloid subsets, which may contribute to their CGD-like infectious phenotype

Controlo químico de infestantes

Uma planta é considerada infestante quando nasce espontaneamente num local e momento indesejados, podendo interferir negativamente com a cultura instalada. As infestantes competem com as culturas para o espaço, a luz, água e nutrientes, podendo atrasar e prejudicar as operações de colheita, depreciar o produto final e assegurarem a reinfestação nas culturas seguintes. Dado o modo de propagação diferenciado das diversas espécies de infestantes, com as anuais a propagarem-se por semente e as perenes ou vivazes a assegurarem a sua propagação através de órgãos vegetativos (rizomas, bolbos, tubérculos, etc.), assim, também o seu controlo quer químico, quer mecânico terá que ser diferenciado, ou seja, para controlar infestantes anuais será suficiente destruir a sua parte aérea, enquanto para controlar infestantes perenes teremos que destruir os seus órgãos reprodutivos. O controlo de infestantes poderá ser químico, através da utilização de herbicidas, ou mecânico pela utilização de alfaias agrícolas, tais como a charrua de aivecas, a charrua de discos, a grade de discos, o escarificador e a fresa. Quando a técnica utilizada na instalação das culturas é a sementeira directa, o controlo das infestantes terá que ser obrigatoriamente químico, enquanto se o recurso à mobilização do solo for a técnica mais utilizada (sistema de mobilização tradicional ou sistema de mobilização reduzida), o controlo das infestantes tanto poderá ser químico como mecânico. Neste trabalho iremos abordar apenas, o controlo químico de infestantes

Characterization of greater middle eastern genetic variation for enhanced disease gene discovery

The Greater Middle East (GME) has been a central hub of human migration and population admixture. The tradition of consanguinity, variably practiced in the Persian Gulf region, North Africa, and Central Asia1-3, has resulted in an elevated burden of recessive disease4. Here we generated a whole-exome GME variome from 1,111 unrelated subjects. We detected substantial diversity and admixture in continental and subregional populations, corresponding to several ancient founder populations with little evidence of bottlenecks. Measured consanguinity rates were an order of magnitude above those in other sampled populations, and the GME population exhibited an increased burden of runs of homozygosity (ROHs) but showed no evidence for reduced burden of deleterious variation due to classically theorized ‘genetic purging’. Applying this database to unsolved recessive conditions in the GME population reduced the number of potential disease-causing variants by four- to sevenfold. These results show variegated genetic architecture in GME populations and support future human genetic discoveries in Mendelian and population genetics

Soccer causes degenerative changes in the cervical spine

Background. Radiological changes and degeneration of the cervical spine have been previously described in soccer players. The onset of such changes was 10-20 years earlier than that of the normal population. The aim of this study was to assess these early degenerative changes in amateur active and veteran soccer players in a cross-sectional descriptive study using biomechanical, radiological, and magnetic resonance measures

Mechanical and Thermal Properties of Pumice Powder Filled PPS Composites

Recently, it is common application to use particle materials as fillers to improve engineering properties and lower the cost of finished product. Pumice powder is cheaper than most of traditional particle fillers, however use of pumice powders as a reinforcing material in composites has not been studied in literature. Hence, in this study we have investigated the mechanical and the thermal properties of pumice powder filled polyphenylenesulphide (PPS) composites. PPS composites were reinforced with pumice powder at different loading rates (0, 1, 3.5, and 10 wt%) and they were manufactured by twin screw extruder and injection molding machine. Thermal properties were investigated by thermogravimetric analysis and differential scanning calorimeter methods. Moreover, mechanical properties such as barcol hardness, tensile strength, and modulus of samples were investigated. Thermal properties of composite samples have varied significantly depending on the loading rate. Also mechanical properties of pumice powder filled PPS composites have showed better results than pure PPS. According to test results both of mechanical and thermal properties of composites have improved with pumice powder reinforcement and it is determined that pumice powders can be used instead of traditional particle fillers

Synthesis and characterization of sugar-based methacrylates and their random copolymers by ATRP

Various sugar-based methacrylate monomers have been prepared and randomly copolymerized with methyl methacrylate (MMA) using classical atom transfer radical polymerization (ATRP). Firstly, four different sugar-based methacrylates are synthesized by two-step method: (i) etherification of protected monosaccharides with epichlorohydrin and (ii) following ring-opening reaction of obtained epoxides with methacrylic acid (MAA) in the presence of triethylamine. Next, these monomers are copolymerized with MMA via ATRP at 90 °C to obtain corresponding random copolymers. The molecular weights of the copolymers are determined by both GPC (gel permeation chromatography) and 1H-NMR (nuclear magnetic resonance spectroscopy) analyses and found as 10600~16800 and 12200~18500 g/mol, respectively. Moreover, the copolymer compositions are also determined by 1H-NMR analysis using characteristic signals of the monomers and found as about 94.1~97.8%, which are good agreement with feeding ratio. In addition, the glass transition temperatures of copolymers are found as 101.2~102.9 °C by changing type and composition of sugar-based methacrylate monomers. Overall, a series of well-defined random copolymers comprising different sugar-based methacrylates and methyl methacrylates were successfully synthesized by classical ATRP method

Low pulse pressure as a predictor of death in patients with mild to advanced heart failure

PubMedID: 20548803The prognostic value of pulse pressure has been investigated in heart-failure patients. Low pulse pressure in advanced heart failure and high pulse pressure in mild heart failure have been separately linked to increased mortality rates. We prospectively investigated an association between pulse pressure and 2-year cardiovascular death in an entire heart-failure population. We prospectively enrolled 225 heart-failure patients (New York Heart Association [NYHA] functional class, I-IV; mean age, 56.5 ± 12.3 yr; 188 men). The patients' blood pressures were measured in accordance with recommended guidelines. Pulse pressures were calculated as the difference between systolic and diastolic blood pressure values. The patients were monitored for a mean period of 670 ± 42 days for the occurrence of cardiovascular death. All patients were divided into quartiles according to their pulse pressures (55 mmHg). Pulse pressure decreased as NYHA class worsened (P <0.001). Patients in the <35-mmHg quartile had the lowest plasma sodium concentrations, left ventricular ejection fractions, and systolic myocardial velocities upon echocardiography; and the highest left ventricular dimensions, early diastolic/late diastolic filling velocity ratios, and peak early/peak late diastolic myocardial velocity ratios. Pulse pressure independently predicted death in the patients with advanced heart failure and in the entire population. Upon receiver operating characteristic analysis, a 30-mmHg cutoff value for pulse pressure predicted death with 83.7% sensitivity and 79.7% specificity. Pulse pressure is easily calculated and enables the prediction of cardiovascular death in patients with mild to advanced heart failure. Pulse pressure can be used reliably as a prognostic marker in clinical practice. © 2010 by the Texas Heart® Institute, Houston