811 research outputs found
Magnetic Properties of Dilute Alloys: Equations for Magnetization and its Structural Fluctuations
The dilute Heisenberg ferromagnet is studied taking into account fluctuations
of magnetization caused by disorder. A self-consistent system of equations for
magnetization and its mean quadratic fluctuations is derived within the
configurationally averaged two-time temperature Green's function method. This
system of equations is analised at low concentration of non-magnetic
impurities. Mean relative quadratic fluctuations of magnetization are revealed
to be proportional to the square of concentration of impurities.Comment: 16 pages, LaTe
Metal insulator transition and magnetotransport anomalies in perovskite SrIr0.5Ru0.5O3 thin films
We investigated the nature of transport and magnetic properties in SrIr0.5Ru0.5O3 (SIRO), which has characteristics intermediate between a correlated non-Fermi liquid state and an itinerant Fermi liquid state, by growing perovskite thin films on various substrates (e.g., SrTiO3 (001), (LaAlO3)(0.3)(Sr2TaAlO6)(0.7) (001), and LaAlO3 (001)). We observed systematic variation of underlying substrate dependent metal-to-insulator transition temperatures (T-MIT similar to 80K on SrTiO3, similar to 90 K on (LaAlO3)(0.3)(Sr2TaAlO6)(0.7), and similar to 100K on LaAlO3) in resistivity. At temperature 300K >= T >= T-MIT, SIRO is metallic and its resistivity follows a T-3/2 power law, whereas insulating nature at T 25 K, with negative MR proportional to B-1/2 and positive MR proportional to B-2; consistent with the localized-to-normal transport crossover dynamics. Furthermore, observed spin glass like behavior of SIRO on SrTiO3 (001) at T < 25 K in the localized regime validates the hypothesis that (Anderson) localization favors glassy ordering. These remarkable features provide a promising approach for future applications and of fundamental interest in oxide thin films. (C) 2015 AIP Publishing LLC.open1186sciescopu
Magnetism and magnetoelectricity in the polar oxide Îą-Cu2V2O7
Single crystals of the orthorhombic polar oxide alpha-Cu2V2O7 with space group Fdd2 are synthesized and their physical properties are measured. Neutron powder diffraction is also performed on a polycrystal sample to extract the magnetic structure. The ground state is shown to be weakly ferromagnetic, that is, collinearly antiferromagnetic in the a-direction with a small remanent magnetization in the c-direction. When an external magnetic field is applied in the c-direction, further spin canting, accompanied by the induced electric polarization, occurs. It is demonstrated that the magnetoelectric effect in alpha-Cu2V2O7 is adequately described if spin-dependent p-d hybridization due to spin-orbit coupling as well as magnetic domain effects are simultaneously taken into account. We discuss the implication of the present result in the search for materials with multiferroicity and/or magnetoelectricity. Copyright (C) EPLA, 2016open11122sciescopu
Construction of a 3He magnetic force microscope with a vector magnet
We constructed a He-3 magnetic force microscope operating at the base temperature of 300 mK under a vector magnetic field of 2-2-9 T in the x-y-z direction. Fiber optic interferometry as a detection scheme is employed in which two home-built fiber walkers are used for the alignment between the cantilever and the optical fiber. The noise level of the laser interferometer is close to its thermodynamic limit. The capabilities of the sub-Kelvin and vector field are demonstrated by imaging the coexistence of magnetism and superconductivity in a ferromagnetic superconductor (ErNi2B2C) at T = 500 mK and by probing a dipole shape of a single Abrikosov vortex with an in-plane tip magnetization. (C) 2016 AIP Publishing LLC.open1111sciescopu
Clothing insulation and temperature, layer and mass of clothing under comfortable environmental conditions
This study was designed to investigate the relationship between the microclimate temperature and clothing insulation (Icl) under comfortable environmental conditions. In total, 20 subjects (13 women, 7 men) took part in this study. Four environmental temperatures were chosen: 14??C (to represent March/April), 25??C (May/June), 29??C (July/August), and 23??C (September/October). Wind speed (0.14ms-1) and humidity (45%) were held constant. Clothing microclimate temperatures were measured at the chest (Tchest) and on the interscapular region (Tscapular). Clothing temperature of the innermost layer (Tinnermost) was measured on this layer 30 mm above the centre of the left breast. Subjects were free to choose the clothing that offered them thermal comfort under each environmental condition. We found the following results. 1) All clothing factors except the number of lower clothing layers (Llower), showed differences between the different environmental conditions (P<0.05). The ranges of Tchest were 31.6 to 33.5??C and 32.2 to 33.4??C in Tscapular. The range of Tinnermost was 28.6 to 32.0??C. The range of the upper clothing layers (Lupper) and total clothing mass (Mtotal) was 1.1 to 3.2 layers and 473 to 1659 g respectively. The range of Icl was 0.78 to 2.10 clo. 2) Post hoc analyses showed that analysis of Tinnermost produced the same results as for that of Icl. Likewise, the analysis of Lupper produced the same result as the analysis of the number of total layers (Ltotal) within an outfit. 3) Air temperature (ta) had positive relationships with Tchest and Tscapular and with Tinnermost but had inverse correlations with Icl, Mtotal, Lupper and Ltotal. Tchest, Tscapular, and Tinnermost increased as ta rose. 4) Icl had inverse relationships with Tchest and Tinnermost, but positive relationships with Mtotal, Lupper and Ltotal. Icl could be estimated by Mtotal, Lupper, and Tscapular using a multivariate linear regression model. 5) Lupper had positive relationships with Icl and Mtotal, but Llower did not. Subjects hardly changed Llower under environmental comfort conditions between March and October. This indicates that each of the Tchest, Mtotal, and Lupper was a factor in predicting Icl. Tinnermost might also be a more influential factor than the clothing microclimate temperature.open1
Bi-Functional Silica Nanoparticles Doped with Iron Oxide and CdTe Prepared by a Facile Method
Cadmium telluride (CdTe) and iron oxide nanoparticles doped silica nanospheres were prepared by a multistep method. Iron oxide nanoparticles were first coated with silica and then modified with amino group. Thereafter, CdTe nanoparticles were assembled on the particle surfaces by their strong interaction with amino group. Finally, an outer silica shell was deposited. The final products were characterized by X-ray powder diffraction, transmission electron microscopy, vibration sample magnetometer, photoluminescence spectra, Fourier transform infrared spectra (FT-IR), and fluorescent microscopy. The characterization results showed that the final nanomaterial possessed a saturation magnetization of about 5.8 emu gâ1and an emission peak at 588 nm when the excitation wavelength fixed at 380 nm
Intra-arterial delivery of triolein emulsion increases vascular permeability in skeletal muscles of rabbits
<p>Abstract</p> <p>Background</p> <p>To test the hypothesis that triolein emulsion will increase vascular permeability of skeletal muscle.</p> <p>Methods</p> <p>Triolein emulsion was infused into the superficial femoral artery in rabbits (triolein group, n = 12). As a control, saline was infused (saline group, n = 18). Pre- and post-contrast T1-weighted MR images were obtained two hours after infusion. The MR images were qualitatively and quantitatively evaluated by assessing the contrast enhancement of the ipsilateral muscles. Histologic examination was performed in all rabbits.</p> <p>Results</p> <p>The ipsilateral muscles of the rabbits in the triolein group showed contrast enhancement, as opposed to in the ipsilateral muscles of the rabbits in the saline group. The contrast enhancement of the lesions was statistically significant (p < 0.001). Histologic findings showed that most examination areas of the triolein and saline groups had a normal appearance.</p> <p>Conclusion</p> <p>Rabbit thigh muscle revealed significantly increased vascular permeability with triolein emulsion; this was clearly demonstrated on the postcontrast MR images.</p
A Recombinant Secondary Antibody Mimic as a Target-specific Signal Amplifier and an Antibody Immobilizer in Immunoassays
We construct a novel recombinant secondary antibody mimic, GST-ABD, which can bind to the Fc regions of target-bound primary antibodies and acquire multiple HRPs simultaneously. We produce it in tenth of mg quantities with a bacterial overexpression system and simple purification procedures, significantly reducing the manufacturing cost and time without the use of animals. GST-ABD is effectively conjugated with 3 HRPs per molecule on an average and selectively bind to the Fc region of primary antibodies derived from three different species (mouse, rabbit, and rat). HRP-conjugated GST-ABD (HRP-GST-ABD) is successfully used as an alternative to secondary antibodies to amplify target-specific signals in both ELISA and immunohistochemistry regardless of the target molecules and origin of primary antibodies used. GST-ABD also successfully serves as an anchoring adaptor on the surface of GSH-coated plates for immobilizing antigen-capturing antibodies in an orientation-controlled manner for sandwich-type indirect ELISA through simple molecular recognition without any complicated chemical modification.clos
Performance of CMS muon reconstruction in pp collision events at sqrt(s) = 7 TeV
The performance of muon reconstruction, identification, and triggering in CMS
has been studied using 40 inverse picobarns of data collected in pp collisions
at sqrt(s) = 7 TeV at the LHC in 2010. A few benchmark sets of selection
criteria covering a wide range of physics analysis needs have been examined.
For all considered selections, the efficiency to reconstruct and identify a
muon with a transverse momentum pT larger than a few GeV is above 95% over the
whole region of pseudorapidity covered by the CMS muon system, abs(eta) < 2.4,
while the probability to misidentify a hadron as a muon is well below 1%. The
efficiency to trigger on single muons with pT above a few GeV is higher than
90% over the full eta range, and typically substantially better. The overall
momentum scale is measured to a precision of 0.2% with muons from Z decays. The
transverse momentum resolution varies from 1% to 6% depending on pseudorapidity
for muons with pT below 100 GeV and, using cosmic rays, it is shown to be
better than 10% in the central region up to pT = 1 TeV. Observed distributions
of all quantities are well reproduced by the Monte Carlo simulation.Comment: Replaced with published version. Added journal reference and DO
- âŚ