Validation of aerosol backscatter profiles from Raman lidar and ceilometer using balloon-borne measurements

Remote-sensing measurements by light detection and ranging (lidar) instruments are fundamental for the monitoring of altitude-resolved aerosol optical properties. Here we validate vertical profiles of aerosol backscatter coefficient ( aer) measured by two independent lidar systems using co-located balloon-borne measurements performed by Compact Optical Backscatter Aerosol Detector (COBALD) sondes. COBALD provides high-precision in situ measurements of aer at two wavelengths (455 and 940 nm). The two analyzed lidar systems are the research Raman Lidar for Meteorological Observations (RALMO) and the commercial CHM15K ceilometer (Lufft, Germany). We consider in total 17 RALMO and 31 CHM15K profiles, colocated with simultaneous COBALD soundings performed throughout the years 2014–2019 at the MeteoSwiss observatory of Payerne (Switzerland). The RALMO (355 nm) and CHM15K (1064 nm) measurements are converted to 455 and 940 nm, respectively, using the Ångström exponent profiles retrieved from COBALD data. To account for the different receiver field-of-view (FOV) angles between the two lidars (0.01–0.02 ) and COBALD (6 ), we derive a custom-made correction using Mie-theory scattering simulations. Our analysis shows that both lidar instruments achieve on average a good agreement with COBALD measurements in the boundary layer and free troposphere, up to 6 km altitude. For medium-high-aerosol-content measurements at altitudes below 3 km, the mean standard deviation difference in aer calculated from all considered soundings is -2% 37%(-0:018 0.237Mm-1 sr-1 at 455 nm) for RALMO-COBALD and C5% 43% (C0.009 0.185Mm-1 sr-1 at 940 mm) for CHM15K- COBALD. Above 3 km altitude, absolute deviations generally decrease, while relative deviations increase due to the prevalence of air masses with low aerosol content. Uncertainties related to the FOV correction and spatial- and temporalvariability effects (associated with the balloon’s drift with altitude and different integration times) contribute to the large standard deviations observed at low altitudes. The lack of information on the aerosol size distribution and the high atmospheric variability prevent an accurate quantification of these effects. Nevertheless, the excellent agreement observed in individual profiles, including fine and complex structures in the aer vertical distribution, shows that under optimal conditions, the discrepancies with the in situ measurements are typically comparable to the estimated statistical uncertainties in the remote-sensing measurements. Therefore, we conclude that aer profiles measured by the RALMO and CHM15K lidar systems are in good agreement with in situ measurements by COBALD sondes up to 6 km altitude.Swiss National Science Foundation (SNSF) European Commission PZ00P2 168114 200021_159950/

Effects of excluding grazing on the vegetation and soils of degraded sparse-elm grassland in the Horqin Sandy Land, China

Livestock grazing is a crucial cause of vegetation degradation and desertification in sandy lands. The sparse-elm grassland of Horqin Sandy Land, China has suffered severe degradation of biodiversity and ecosystem services. Management to exclude grazing is often necessary for ecological restoration, especially in arid and semi-arid regions. We report effects on vegetation and soils in a 10-year experiment to exclude livestock, completely or seasonally, in comparison with a continuously grazed area in Horqin. Complete exclusion of grazing and restriction of grazing to summer both led to significantly increased plant cover and density relative to the grazed control. Species richness increased, reflected in higher Shannon-Wiener indices; only complete exclusion increased the Simpson diversity index, whereas Pielou evenness was significantly lowest under seasonal grazing. Exclosure treatments were also associated with improved soil texture, and increased water retention, available nitrogen, total nitrogen, total carbon and total phosphorus. Soil pH and C/N ratio were highest under the seasonal grazing regime. The results indicated that exclosure management indeed improved biodiversity and ecosystem services in an erosion-prone region. Although total exclosure was most effective in restoration of degraded sparse-elm grassland, seasonal grazing management was highly beneficial and represented a good compromise with resource utilization and economic development

Spatial variation of aerosol optical properties around the high-alpine site Jungfraujoch (3580 m a.s.l.)

This paper presents results of the extensive field campaign CLACE 2010 (Cloud and Aerosol Characterization Experiment) performed in summer 2010 at the Jungfraujoch (JFJ) and the Kleine Scheidegg (KLS) in the Swiss Alps. The main goal of this campaign was to investigate the vertical variability of aerosol optical properties around the JFJ and to show the consistency of the different employed measurement techniques considering explicitly the effects of relative humidity (RH) on the aerosol light scattering. Various aerosol optical and microphysical parameters were recorded using in-situ and remote sensing techniques. In-situ measurements of aerosol size distribution, light scattering, light absorption and scattering enhancement due to water uptake were performed at the JFJ at 3580 m a.s.l.. A unique set-up allowed remote sensing measurements of aerosol columnar and vertical properties from the KLS located about 1500 m below and within the line of sight to the JFJ (horizontal distance of approx. 4.5 km). In addition, two satellite retrievals from the Spinning Enhanced Visible and Infrared Imager (SEVIRI) and the Moderate Resolution Imaging Spectroradiometer (MODIS) as well as back trajectory analyses were added to the comparison to account for a wider geographical context. All in-situ and remote sensing measurements were in clear correspondence. The ambient extinction coefficient measured in situ at the JFJ agreed well with the KLS-based LIDAR (Light Detection and Ranging) retrieval at the altitude-level of the JFJ under plausible assumptions on the LIDAR ratio. However, we can show that the quality of this comparison is affected by orographic effects due to the exposed location of the JFJ on a saddle between two mountains and next to a large glacier. The local RH around the JFJ was often higher than in the optical path of the LIDAR measurement, especially when the wind originated from the south via the glacier, leading to orographic clouds which remained lower than the LIDAR beam. Furthermore, the dominance of long-range transported Saharan dust was observed in all measurements for several days, however only for a shorter time period in the in-situ measurements due to the vertical structure of the dust plume. The optical properties of the aerosol column retrieved from SEVIRI and MODIS showed the same magnitude and a similar temporal evolution as the measurements at the KLS and the JFJ. Remaining differences are attributed to the complex terrain and simplifications in the aerosol retrieval scheme in general

Synergy processing of diverse ground-based remote sensing and in situ data using the GRASP algorithm: applications to radiometer, lidar and radiosonde observations

International audienceAbstract. The exploration of aerosol retrieval synergies from diverse combinations of ground-based passive Sun-photometric measurements with collocated active lidar ground-based and radiosonde observations using versatile Generalized Retrieval of Atmosphere and Surface Properties (GRASP) algorithm is presented. Several potentially fruitful aspects of observation synergy were considered. First, a set of passive and active ground-based observations collected during both day- and nighttime was inverted simultaneously under the assumption of temporal continuity of aerosol properties. Such an approach explores the complementarity of the information in different observations and results in a robust and consistent processing of all observations. For example, the interpretation of the nighttime active observations usually suffers from the lack of information about aerosol particles sizes, shapes and complex refractive index. In the realized synergy retrievals, the information propagating from the nearby Sun-photometric observations provides sufficient constraints for reliable interpretation of both day- and nighttime lidar observations. Second, the synergetic processing of such complementary observations with enhanced information content allows for optimizing the aerosol model used in the retrieval. Specifically, the external mixture of several aerosol components with predetermined sizes, shapes and composition has been identified as an efficient approach for achieving reliable retrieval of aerosol properties in several situations. This approach allows for achieving consistent and accurate aerosol retrievals from processing stand-alone advanced lidar observations with reduced information content about aerosol columnar properties. Third, the potential of synergy processing of the ground-based Sun-photometric and lidar observations, with the in situ backscatter sonde measurements was explored using the data from KAUST.15 and KAUST.16 field campaigns held at King Abdullah University of Science and Technology (KAUST) in the August of 2015 and 2016. The inclusion of radiosonde data has been demonstrated to provide significant additional constraints to validate and improve the accuracy and scope of aerosol profiling. The results of all retrieval setups used for processing both synergy and stand-alone observation data sets are discussed and intercompared

Comparison of ozonesonde measurements in the upper troposphere and lower Stratosphere in Northern India with reanalysis and chemistry-climate-model data

Abstract The variability and trend of ozone (O3) in the Upper troposphere and Lower Stratosphere (UTLS) over the Asian region needs to be accurately quantified. Ozone in the UTLS radiatively heats this region and cools the upper parts of the stratosphere. This results in an impact on relative humidity, static stability in the UTLS region and tropical tropopause temperature. A major challenge for understanding ozone chemistry in the UTLS is sparse observations and thus the representation of precursor gases in model emission inventories. Here, we evaluate ozonesonde measurements during August 2016 at Nainital, in the Himalayas, against ozone from multiple reanalyses and the ECHAM6-HAMMOZ model. We find that compared to measurements both reanalyses and ECHAM6-HAMMOZ control simulation overestimate ozone mixing ratios in the troposphere (20 ppb) and in the UTLS (55 ppb). We performed sensitivity simulations using the ECHAM6-HAMMOZ model for a 50% reduction in the emission of (1) NOx and (2) VOCs. The model simulations with NOX reduction agree better with the ozonesonde observations in the lower troposphere and in the UTLS. Thus, neither reanalyses nor ECHAM6-HAMMOZ results can reproduce observed O3 over the South Asian region. For a better representation of O3 in the ECHAM6-HAMMOZ model, NOX emission should be reduced by 50% in the emission inventory. A larger number of observations of ozone and precursor gases over the South Asian region would improve the assessment of ozone chemistry in models

Observational evidence of particle hygroscopic growth in the upper troposphere-lower stratosphere (UTLS) over the Tibetan Plateau

We measured the vertical profiles of backscatter ratio (BSR) using the balloon-borne, lightweight Compact Optical Backscatter AerosoL Detector (COBALD) instruments above Linzhi, located in the southeastern Tibetan Plateau, in the summer of 2014. An enhanced aerosol layer in the upper troposphere–lower stratosphere (UTLS), with BSR (455 nm) > 1.1 and BSR (940 nm) > 1.4, was observed. The color index (CI) of the enhanced aerosol layer, defined as the ratio of aerosol backscatter ratios (ABSRs) at wavelengths of 940 and 455 nm, varied from 4 to 8, indicating the prevalence of fine particles with a mode radius of less than 0.1 µm. We find that unlike the very small particles (mode radius smaller than 0.04 µm) at low relative humidity (RHi < 40 %), the relatively large particles in the aerosol layer were generally very hydrophilic as their size increased dramatically with relative humidity. This result indicates that water vapor can play a very important role in increasing the size of fine particles in the UTLS over the Tibetan Plateau. Our observations provide observation-based evidence supporting the idea that aerosol particle hygroscopic growth is an important factor influencing the radiative properties of the Asian Tropopause Aerosol Layer (ATAL) during the Asian summer monsoon.ISSN:1680-7375ISSN:1680-736

Understanding cryogenic frost point hygrometer measurements after contamination by mixed-phase clouds

Abstract. Balloon-borne water vapour measurements in the (sub)tropical upper troposphere and lower stratosphere (UTLS) by means of frost point hygrometers provide important information on air chemistry and climate. However, the risk of contamination from sublimating hydrometeors collected by the intake tube may render these measurements difficult, particularly after crossing low clouds containing supercooled droplets. A large set of measurements during the 2016–2017 StratoClim balloon campaigns at the southern slopes of the Himalayas allows us to perform an in-depth analysis of this type of contamination. We investigate the efficiency of wall-contact and freezing of supercooled droplets in the intake tube and the subsequent sublimation in the UTLS using Computational Fluid Dynamics (CFD). We find that the airflow can enter the intake tube with impingement angles up to 60°, owing to the pendulum motion of the payload. Supercooled droplets with radii > 70 μm, as they frequently occur in mid-tropospheric clouds, typically undergo contact freezing when entering the intake tube, whereas only about 50 % of droplets with 10 μm radius freeze, and droplets 100 ppmv) in the stratosphere. Furthermore, we use CFD to differentiate between stratospheric water vapour contamination by an icy intake tube and contamination caused by outgassing from the balloon and payload, revealing that the latter starts playing a role only at high altitudes (