179 research outputs found
Recommended from our members
The new BELUGA setup for collocated turbulence and radiation measurements using a tethered balloon: First applications in the cloudy Arctic boundary layer
The new BELUGA (Balloon-bornE moduLar Utility for profilinG the lower Atmosphere) tethered balloon system is introduced. It combines a set of instruments to measure turbulent and radiative parameters and energy fluxes. BELUGA enables collocated measurements either at a constant altitude or as vertical profiles up to 1.5km in height. In particular, the instrument payload of BELUGA comprises three modular instrument packages for high-resolution meteorological, wind vector and broadband radiation measurements. Collocated data acquisition allows for estimates of the driving parameters in the energy balance at various heights. Heating rates and net irradiances can be related to turbulent fluxes and local turbulence parameters such as dissipation rates. In this paper the technical setup, the instrument performance, and the measurement strategy of BELUGA are explained. Furthermore, the high vertical resolution due to the slow ascent speed is highlighted as a major advantage of tethered balloon-borne observations. Three illustrative case studies of the first application of BELUGA in the Arctic atmospheric boundary layer are presented. As a first example, measurements of a single-layer stratocumulus are discussed. They show a pronounced cloud top radiative cooling of up to 6K h-1. To put this into context, a second case elaborates respective measurements with BELUGA in a cloudless situation. In a third example, a multilayer stratocumulus was probed, revealing reduced turbulence and negligible cloud top radiative cooling for the lower cloud layer. In all three cases the net radiative fluxes are much higher than turbulent fluxes. Altogether, BELUGA has proven its robust performance in cloudy conditions of the Arctic atmospheric boundary layer
New-particle formation events in a continental boundary layer: first results from the SATURN experiment
International audienceDuring the SATURN experiment, which took place from 27 May to 14 June 2002, new particle formation in the continental boundary layer was investigated. Simultaneous ground-based and tethered-balloon-borne measurements were performed, including meteorological parameters, particle number concentrations and size distributions, gaseous precursor concentrations and SODAR and LIDAR observations. Newly formed particles were observed inside the residual layer, before the break-up process of the nocturnal inversion, and inside the mixing layer throughout the break-up of the nocturnal inversion and during the evolution of the planetary boundary layer.</p
Cloud geometry from oxygen-A-band observations through an aircraft side window
During the ACRIDICON-CHUVA (Aerosol, Cloud, Precipitation,
and Radiation Interactions and Dynamics of Convective Cloud Systems–Cloud
Processes of the Main Precipitation Systems in Brazil: A Contribution to
Cloud Resolving Modeling and to the GPM (Global Precipitation Measurement)) aircraft campaign in September 2014 over the
Amazon, among other topics, aerosol effects on the development of cloud
microphysical profiles during the burning season were studied. Hyperspectral
remote sensing with the imaging spectrometer specMACS provided cloud
microphysical information for sun-illuminated cloud sides. In order to derive
profiles of phase or effective radius from cloud side observations, vertical
location information is indispensable. For this purpose, spectral
measurements of cloud-side-reflected radiation in the oxygen A absorption
band collected by specMACS were used to determine absorption path length
between cloud sides and the instrument aboard the aircraft. From these data,
horizontal distance and eventually vertical height were derived.
It is shown that, depending on aircraft altitude and sensor viewing
direction, an unambiguous relationship of absorption and distance exists and
can be used to retrieve cloud geometrical parameters. A comparison to
distance and height information from stereo image analysis (using data of an
independent camera) demonstrates the efficiency of the approach. Uncertainty
estimates due to method, instrument and environmental factors are provided.
The main sources of uncertainty are unknown in cloud absorption path
contributions due to complex 3-D geometry or unknown microphysical
properties, variable surface albedo and aerosol distribution. A systematic
difference of 3.8 km between the stereo and spectral method is found which can
be attributed to 3-D geometry effects not considered in the method's
simplified cloud model. If this offset is considered, typical differences
found are 1.6 km for distance and 230 m for vertical position at a typical
distance around 20 km between sensor and convective cloud elements of
typically 1–10 km horizontal and vertical extent.</p
Additional global climate cooling by clouds due to ice crystal complexity
Ice crystal submicron structures have a large impact on the optical properties of cirrus clouds and consequently on their radiative effect. Although there is growing evidence that atmospheric ice crystals are rarely pristine, direct in situ observations of the degree of ice crystal complexity are largely missing. Here we show a comprehensive in situ data set of ice crystal complexity coupled with measurements of the cloud angular scattering functions collected during a number of observational airborne campaigns at diverse geographical locations. Our results demonstrate that an overwhelming fraction (between 61 % and 81 %) of atmospheric ice crystals sampled in the different regions contain mesoscopic deformations and, as a consequence, a similar flat and featureless angular scattering function is observed. A comparison between the measurements and a database of optical particle properties showed that severely roughened hexagonal aggregates optimally represent the measurements in the observed angular range. Based on this optical model, a new parameterization of the cloud bulk asymmetry factor was introduced and its effects were tested in a global climate model. The modelling results suggest that, due to ice crystal complexity, ice-containing clouds can induce an additional short-wave cooling effect of −1.12 W m2 on the top-of-the-atmosphere radiative budget that has not yet been considered
In-situ observations of young contrails – overview and selected results from the CONCERT campaign
Lineshaped contrails were detected with the research aircraft Falcon during the CONCERT – CONtrail and Cirrus ExpeRimenT – campaign in October/November 2008. The Falcon was equipped with a set of instruments to measure the particle size distribution, shape, extinction and chemical composition as well as trace gas mixing ratios of sulfur dioxide (SO<sub>2</sub>), reactive nitrogen and halogen species (NO, NO<sub>y</sub>, HNO<sub>3</sub>, HONO, HCl), ozone (O<sub>3</sub>) and carbon monoxide (CO). During 12 mission flights over Europe, numerous contrails, cirrus clouds and a volcanic aerosol layer were probed at altitudes between 8.5 and 11.6 km and at temperatures above 213 K. 22 contrails from 11 different aircraft were observed near and below ice saturation. The observed NO mixing ratios, ice crystal and soot number densities are compared to a process based contrail model. On 19 November 2008 the contrail from a CRJ-2 aircraft was penetrated in 10.1 km altitude at a temperature of 221 K. The contrail had mean ice crystal number densities of 125 cm<sup>−3</sup> with effective radii <i>r</i><sub>eff</sub> of 2.6 μm. The presence of particles with <i>r</i>>50 μm in the less than 2 min old contrail suggests that natural cirrus crystals were entrained in the contrail. Mean HONO/NO (HONO/NO<sub>y</sub>) ratios of 0.037 (0.024) and the fuel sulfur conversion efficiency to H<sub>2</sub>SO<sub>4</sub> (&epsilon;<sub><i>S</i>↓</sub>) of 2.9 % observed in the CRJ-2 contrail are in the range of previous measurements in the gaseous aircraft exhaust. On 31 October 2010 aviation NO emissions could have contributed by more than 40% to the regional scale NO levels in the mid-latitude lowest stratosphere. The CONCERT observations help to better quantify the climate impact from contrails and will be used to investigate the chemical processing of trace gases on contrails
Arctic change and possible influence on mid-latitude climate and weather: a US CLIVAR White Paper
The Arctic has warmed more than twice as fast as the global average since the mid 20th century,
a phenomenon known as Arctic amplification (AA). These profound changes to the Arctic system
have coincided with a period of ostensibly more frequent events of extreme weather across the
Northern Hemisphere (NH) mid-latitudes, including extreme heat and rainfall events and recent
severe winters. Though winter temperatures have generally warmed since 1960 over mid-to-high
latitudes, the acceleration in the rate of warming at high-latitudes, relative to the rest of the NH,
started approximately in 1990. Trends since 1990 show cooling over the NH continents, especially
in Northern Eurasia.
The possible link between Arctic change and mid-latitude climate and weather has spurred a rush
of new observational and modeling studies. A number of workshops held during 2013-2014 have
helped frame the problem and have called for continuing and enhancing efforts for improving
our understanding of Arctic-mid-latitude linkages and its attribution to the occurrence of extreme
climate and weather events. Although these workshops have outlined some of the major challenges
and provided broad recommendations, further efforts are needed to synthesize the diversified
research results to identify where community consensus and gaps exist.
Building upon findings and recommendations of the previous workshops, the US CLIVAR Working
Group on Arctic Change and Possible Influence on Mid-latitude Climate and Weather convened an
international workshop at Georgetown University in Washington, DC, on February 1-3, 2017. Experts
in the fields of atmosphere, ocean, and cryosphere sciences assembled to assess the rapidly evolving
state of understanding, identify consensus on knowledge and gaps in research, and develop specific
actions to accelerate progress within the research community. With more than 100 participants,
the workshop was the largest and most comprehensive gathering of climate scientists to address
the topic to date. In this white paper, we synthesize and discuss outcomes from this workshop and
activities involving many of the working group members
COVID-19 severity correlates with airway epithelium-immune cell interactions identified by single-cell analysis
To investigate the immune response and mechanisms associated with severe coronavirus disease 2019 (COVID-19), we performed single-cell RNA sequencing on nasopharyngeal and bronchial samples from 19 clinically well-characterized patients with moderate or critical disease and from five healthy controls. We identified airway epithelial cell types and states vulnerable to severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2) infection. In patients with COVID-19, epithelial cells showed an average three-fold increase in expression of the SARS-CoV-2 entry receptor ACE2, which correlated with interferon signals by immune cells. Compared to moderate cases, critical cases exhibited stronger interactions between epithelial and immune cells, as indicated by ligand–receptor expression profiles, and activated immune cells, including inflammatory macrophages expressing CCL2, CCL3, CCL20, CXCL1, CXCL3, CXCL10, IL8, IL1B and TNF. The transcriptional differences in critical cases compared to moderate cases likely contribute to clinical observations of heightened inflammatory tissue damage, lung injury and respiratory failure. Our data suggest that pharmacologic inhibition of the CCR1 and/or CCR5 pathways might suppress immune hyperactivation in critical COVID-19
Engineering yield and rate of reductive biotransformation in Escherichia coli by partial cyclization of the pentose phosphate pathway and PTS-independent glucose transport
Optimization of yields and productivities in reductive whole-cell biotransformations is an important issue for the industrial application of such processes. In a recent study with Escherichia coli, we analyzed the reduction of the prochiral β-ketoester methyl acetoacetate by an R-specific alcohol dehydrogenase (ADH) to the chiral hydroxy ester (R)-methyl 3-hydroxybutyrate (MHB) using glucose as substrate for the generation of NADPH. Deletion of the phosphofructokinase gene pfkA almost doubled the yield to 4.8 mol MHB per mole of glucose, and it was assumed that this effect was due to a partial cyclization of the pentose phosphate pathway (PPP). Here, this partial cyclization was confirmed by 13C metabolic flux analysis, which revealed a negative net flux from glucose 6-phosphate to fructose 6-phosphate catalyzed by phosphoglucose isomerase. For further process optimization, the genes encoding the glucose facilitator (glf) and glucokinase (glk) of Zymomonas mobilis were overexpressed in recombinant E. coli strains carrying ADH and deletions of either pgi (phosphoglucose isomerase), or pfkA, or pfkA plus pfkB. In all cases, the glucose uptake rate was increased (30–47%), and for strains Δpgi and ΔpfkA also, the specific MHB production rate was increased by 15% and 20%, respectively. The yield of the latter two strains slightly dropped by 11% and 6%, but was still 73% and 132% higher compared to the reference strain with intact pgi and pfkA genes and expressing glf and glk. Thus, metabolic engineering strategies are presented for improving yield and rate of reductive redox biocatalysis by partial cyclization of the PPP and by increasing glucose uptake, respectively
Challenges in QCD matter physics - The Compressed Baryonic Matter experiment at FAIR
Substantial experimental and theoretical efforts worldwide are devoted to
explore the phase diagram of strongly interacting matter. At LHC and top RHIC
energies, QCD matter is studied at very high temperatures and nearly vanishing
net-baryon densities. There is evidence that a Quark-Gluon-Plasma (QGP) was
created at experiments at RHIC and LHC. The transition from the QGP back to the
hadron gas is found to be a smooth cross over. For larger net-baryon densities
and lower temperatures, it is expected that the QCD phase diagram exhibits a
rich structure, such as a first-order phase transition between hadronic and
partonic matter which terminates in a critical point, or exotic phases like
quarkyonic matter. The discovery of these landmarks would be a breakthrough in
our understanding of the strong interaction and is therefore in the focus of
various high-energy heavy-ion research programs. The Compressed Baryonic Matter
(CBM) experiment at FAIR will play a unique role in the exploration of the QCD
phase diagram in the region of high net-baryon densities, because it is
designed to run at unprecedented interaction rates. High-rate operation is the
key prerequisite for high-precision measurements of multi-differential
observables and of rare diagnostic probes which are sensitive to the dense
phase of the nuclear fireball. The goal of the CBM experiment at SIS100
(sqrt(s_NN) = 2.7 - 4.9 GeV) is to discover fundamental properties of QCD
matter: the phase structure at large baryon-chemical potentials (mu_B > 500
MeV), effects of chiral symmetry, and the equation-of-state at high density as
it is expected to occur in the core of neutron stars. In this article, we
review the motivation for and the physics programme of CBM, including
activities before the start of data taking in 2022, in the context of the
worldwide efforts to explore high-density QCD matter.Comment: 15 pages, 11 figures. Published in European Physical Journal
- …