Voltage programmable liquid optical devices

In this study I have looked at two types of voltage programmable liquid optical device. The first is a rotatable liquid crystal waveplate and the second is an amplitude programmable liquid phase grating. The rotatable waveplate was created by confining a droplet of E7 nematic liquid crystal between two glass substrates in a photolithographically produced square well of 60x60x15µm dimensions. The droplet forms a circular disc shape with two nematic defects at opposite edges of the disc. The optical texture has been examined and the most likely n-director orientation is shown to be Bipolar. Electrodes etched into the sandwiching substrate allow an in-plane electric field to be applied and because of the E7's positive dielectric anisotropy the n-director of the droplet aligns itself with the field. The speed at which this rotation occurs is shown to follow the relationship Ø = 0.0472гV 2 and rotation speeds of 450° /s have been achieved

Electric field induced reversible spreading of droplets into films on lubricant impregnated surfaces

Electric fields can be used to force a droplet to wet a solid surface using an applied voltage. However, significant hysteresis usually occurs associated with pinning forces at the contact line. Here, we report the forced spreading and subsequent retraction of droplets into liquid films in air on lubricant impregnated surfaces (also known as slippery liquid infused porous surfaces) where the contact line is completely mobile. We first confirm that we achieve a complete removal of hysteresis for the electrowetting of droplets above the saturation voltage. We then show that contact angle hysteresis can be reduced to less than 4° whilst retaining the ability to fully spread a droplet into a liquid film using an interface localized from liquid dielectrophoresis (dielectrowetting). In both cases, we find that the cosine of the contact angle has a quadratic dependence on applied voltage, consistent with previous theoretical expectations. Thus, our work demonstrates that fully reversible spreading encompassing a wide range of partial wetting droplet states and a film state can be achieved in air in a controllable manner with very low levels of hysteresis

Bioinspired nanoparticle spray-coating for superhydrophobic flexible materials with oil/water separation capabilities

Much of the inspiration for the creation of superhydrophobic surfaces has come from nature, from plant such as the Sacred Lotus (Nulembo nucifera), where the micro-scale papillae epidermal cells on the surfaces of the leaves are covered with nano-scale epicuticular wax crystalloids. The combination of the surface roughness and the hydrophobic wax coating produces a superhydrophobic wetting state on the leaves allowing them to self-clean and easily shed water. Here a simple scale-up carbon nanoparticle spray coating is presented that mimics the surface of the Sacred Lotus leaves and can be applied to a wide variety of materials, complex structures, and flexible substrates, rendering them super hydrophobic, with contact angles above 160°. The sprayable mixture is produced by combining toluene, polydimethylsiloxane (PDMS), And inherently hydrophobic rapeseed soot. The ability to spray the superhydrophobic coating allows for the hydrophobisation of complex structures such a metallic meshes, which allows for the production of flexible porous superhydrophobic materials that when formed into U-shape channels, can be used to direct flows. The porous meshes, whilst being superhydrophobic, are also oleophilic. Being both superhydrophobic and oleophilic allows oil to pass through the mesh, whilst water remains on the surface. The meshes were tested for their ability to separate mixtures of oil and water in a flow situation. When silicone oil/water mixtures were passed over the meshes, all meshes tested were capable of separating more than 93% of the oil from the mixture

BSE Case Associated with Prion Protein Gene Mutation

Bovine spongiform encephalopathy (BSE) is a transmissible spongiform encephalopathy (TSE) of cattle and was first detected in 1986 in the United Kingdom. It is the most likely cause of variant Creutzfeldt-Jakob disease (CJD) in humans. The origin of BSE remains an enigma. Here we report an H-type BSE case associated with the novel mutation E211K within the prion protein gene (Prnp). Sequence analysis revealed that the animal with H-type BSE was heterozygous at Prnp nucleotides 631 through 633. An identical pathogenic mutation at the homologous codon position (E200K) in the human Prnp has been described as the most common cause of genetic CJD. This finding represents the first report of a confirmed case of BSE with a potential pathogenic mutation within the bovine Prnp gene. A recent epidemiological study revealed that the K211 allele was not detected in 6062 cattle from commercial beef processing plants and 42 cattle breeds, indicating an extremely low prevalence of the E211K variant (less than 1 in 2000) in cattle

Double-sided slippery liquid-infused porous materials using conformable mesh

Often wetting is considered from the perspective of a single surface of a rigid substrate and its topographical properties such as roughness or texture. However, many substrates, such as membranes and meshes, have two useful surfaces. Such flexible substrates also offer the potential to be formed into structures with either a double-sided surface (e.g. by joining the ends of a mesh as a tape) or a single-sided surface (e.g. by ends with a half-twist). When a substrate possesses holes, it is also possible to consider how the spaces in the substrate may be connected or disconnected. This combination of flexibility, holes and connectedness can therefore be used to introduce topological concepts, which are distinct from simple topography. Here, we present a method to create a Slippery Liquid-Infused Porous Surface (SLIPS) coating on flexible conformable doubled-sided meshes and for coating complex geometries. By considering the flexibility and connectedness of a mesh with the surface properties of SLIPS, we show it is possible to create double-sided SLIPS materials with high droplet mobility and droplet control on both faces. We also exemplify the importance of flexibility using a mesh-based SLIPS pipe capable of withstanding laminar and turbulent flows for 180 and 90 minutes, respectively. Finally, we discuss how ideas of topology introduced by the SLIPS mesh might be extended to create completely new types of SLIPS systems, such as Mobius strips and auxetic metamaterials

Low-friction self-centering droplet propulsion and transport using a Leidenfrost herringbone-ratchet structure

A fundamental limitation to the ability to transport sessile droplets is frictional forces arising from surface adhesion. This can be overcome by using the Leidenfrost effect on a heated substrate to levitate the droplet on a cushion of vapor. By structuring the surface under the droplet, the flow of vapor below the droplet can be controlled and this can be used to induce preferential droplet propulsion in a particular direction. However, while propulsion can be induced, the dramatic reduction in frictional forces leads to instability and it is difficult to control droplet motion when transporting droplets along a defined path. Here, we present a self-propulsion and self-centering concept using the principles of negative feedback to enable a droplet to be transported along a defined path. In our implementation, we use a combined herringbone and ratchet design, which provides the ability to control droplet position without compromising on speed. This intrinsic self-centering and correction via negative feedback offers the potential to design paths and tracks for droplets to follow, without the need for walls

A compendium and functional characterization of mammalian genes involved in adaptation to Arctic or Antarctic environments

Many mammals are well adapted to surviving in extremely cold environments. These species have likely accumulated genetic changes that help them efficiently cope with low temperatures. It is not known whether the same genes related to cold adaptation in one species would be under selection in another species. The aims of this study therefore were: to create a compendium of mammalian genes related to adaptations to a low temperature environment; to identify genes related to cold tolerance that have been subjected to independent positive selection in several species; to determine promising candidate genes/pathways/organs for further empirical research on cold adaptation in mammals

Cosmic Flows on 100 Mpc/h Scales: Standardized Minimum Variance Bulk Flow, Shear and Octupole Moments

The low order moments, such as the bulk flow and shear, of the large scale peculiar velocity field are sensitive probes of the matter density fluctuations on very large scales. In practice, however, peculiar velocity surveys are usually sparse and noisy, which can lead to the aliasing of small scale power into what is meant to be a probe of the largest scales. Previously, we developed an optimal ``minimum variance'' (MV) weighting scheme, designed to overcome this problem by minimizing the difference between the measured bulk flow (BF) and that which would be measured by an ideal survey. Here we extend this MV analysis to include the shear and octupole moments, which are designed to have almost no correlations between them so that they are virtually orthogonal. We apply this MV analysis to a compilation of all major peculiar velocity surveys, consisting of 4536 measurements. Our estimate of the BF on scales of ~ 100 Mpc/h has a magnitude of |v|= 416 +/- 78 km/s towards Galactic l = 282 degree +/- 11 degree and b = 6 degree +/- 6 degree. This result is in disagreement with LCDM with WMAP5 cosmological parameters at a high confidence level, but is in good agreement with our previous MV result without an orthogonality constraint, showing that the shear and octupole moments did not contaminate the previous BF measurement. The shear and octupole moments are consistent with WMAP5 power spectrum, although the measurement noise is larger for these moments than for the BF. The relatively low shear moments suggest that the sources responsible for the BF are at large distances.Comment: 13 Pages, 7 figures, 4 tables. Some changes to reflect the published versio

Large-scale genome-wide association studies and meta-analyses of longitudinal change in adult lung function.

BACKGROUND: Genome-wide association studies (GWAS) have identified numerous loci influencing cross-sectional lung function, but less is known about genes influencing longitudinal change in lung function. METHODS: We performed GWAS of the rate of change in forced expiratory volume in the first second (FEV1) in 14 longitudinal, population-based cohort studies comprising 27,249 adults of European ancestry using linear mixed effects model and combined cohort-specific results using fixed effect meta-analysis to identify novel genetic loci associated with longitudinal change in lung function. Gene expression analyses were subsequently performed for identified genetic loci. As a secondary aim, we estimated the mean rate of decline in FEV1 by smoking pattern, irrespective of genotypes, across these 14 studies using meta-analysis. RESULTS: The overall meta-analysis produced suggestive evidence for association at the novel IL16/STARD5/TMC3 locus on chromosome 15 (P  =  5.71 × 10(-7)). In addition, meta-analysis using the five cohorts with ≥3 FEV1 measurements per participant identified the novel ME3 locus on chromosome 11 (P  =  2.18 × 10(-8)) at genome-wide significance. Neither locus was associated with FEV1 decline in two additional cohort studies. We confirmed gene expression of IL16, STARD5, and ME3 in multiple lung tissues. Publicly available microarray data confirmed differential expression of all three genes in lung samples from COPD patients compared with controls. Irrespective of genotypes, the combined estimate for FEV1 decline was 26.9, 29.2 and 35.7 mL/year in never, former, and persistent smokers, respectively. CONCLUSIONS: In this large-scale GWAS, we identified two novel genetic loci in association with the rate of change in FEV1 that harbor candidate genes with biologically plausible functional links to lung function

To respond or not to respond - a personal perspective of intestinal tolerance

For many years, the intestine was one of the poor relations of the immunology world, being a realm inhabited mostly by specialists and those interested in unusual phenomena. However, this has changed dramatically in recent years with the realization of how important the microbiota is in shaping immune function throughout the body, and almost every major immunology institution now includes the intestine as an area of interest. One of the most important aspects of the intestinal immune system is how it discriminates carefully between harmless and harmful antigens, in particular, its ability to generate active tolerance to materials such as commensal bacteria and food proteins. This phenomenon has been recognized for more than 100 years, and it is essential for preventing inflammatory disease in the intestine, but its basis remains enigmatic. Here, I discuss the progress that has been made in understanding oral tolerance during my 40 years in the field and highlight the topics that will be the focus of future research