Potassium, Calcium, and Magnesium Bridging of AOT to Mica at Constant Ionic Strength.

The bridging effect of a series of common cations between the anionic mica surface and the AOT anion has been studied in a condition of constant ionic strength and surfactant concentration. It was found that sodium ions did not show any bridging effect in this system; however, calcium, magnesium, and potassium all caused adsorption of the organic to the mica surface. The concentrations at which bridging occurred was probed, revealing that only a very low bridging cation concentration was required for binding. The bridged layer stability was also investigated, and the interaction was shown to be a weak one, with the bound layer in equilibrium with the species in the bulk and easily removed. Even maintaining ionic strength and bridging ion concentration was not sufficient to retain the layer when the free organic in solution was removed.We thank EPSRC and BP plc for the funding (RG8620) that made this work possible

Towards a neutron and X-ray reflectometry environment for the study of solid–liquid interfaces under shear

Funder: Infineum UK LtdAbstract: A novel neutron and X-ray reflectometry sample environment is presented for the study of surface-active molecules at solid–liquid interfaces under shear. Neutron reflectometry was successfully used to characterise the iron oxide–dodecane interface at a shear rate of 7.0×102s-1 using a combination of conventional reflectometry theory coupled with the summation of reflected intensities to describe reflectivity from thicker films. Additionally, the structure adopted by glycerol monooleate (GMO), an Organic Friction Modifier, when adsorbed at the iron oxide–dodecane interface at a shear rate of 7.0×102s-1 was studied. It was found that GMO forms a surface layer that appears unaltered by the effect of shear, where the thickness of the GMO layer was found to be 24.3-10.2+9.9 Å under direct shear at 7.0×102s-1 and 25.8-5.2+4.4 Å when not directly under shear. Finally, a model to analyse X-ray reflectometry data collected with the sample environment is also described and applied to data collected at 3.0×103s-1

Effect of nonionic and amphoteric surfactants on salivary pellicles reconstituted in vitro

Surfactants are important components of oral care products. Sodium dodecyl sulfate (SDS) is the most common because of its foaming properties, taste and low cost. However, the use of ionic surfactants, especially SDS, is related to several oral mucosa conditions. Thus, there is a high interest in using non‐ ionic and amphoteric surfactants as they are less irritant. To better understand the performance of these surfactants in oral care products, we investigated their interaction with salivary pellicles i.e., the proteinaceous films that cover surfaces exposed to saliva. Specifically, we focused on pentaethylene glycol monododecyl ether (C12E5) and cocamidopropyl betaine (CAPB) as model nonionic and amphoteric surfactants respectively, and investigated their interaction with reconstituted salivary pellicles with various surface techniques: Quartz Crystal Microbalance with Dissipation, Ellipsometry, Force Spectroscopy and Neutron Reflectometry. Both C12E5 and CAPB were gentler on pellicles than SDS, removing a lower amount. However, their interaction with pellicles differed. Our work indicates that CAPB would mainly interact with the mucin components of pellicles, leading to collapse and dehydration. In contrast, exposure to C12E5 had a minimal effect on the pellicles, mainly resulting in the replacement/solubilisation of some of the components anchoring pellicles to their substrate

Measurement of gas-phase OH radical oxidation and film thickness of organic films at the air–water interface using material extracted from urban, remote and wood smoke aerosol

The presence of an organic film on a cloud droplet or aqueous aerosol particle has the potential to alter the chemical, optical and physical properties of the droplet or particle. In the study presented, water insoluble organic materials extracted from urban, remote (Antarctica) and wood burning atmospheric aerosol were found to have stable, compressible, films at the air–water interface that were typically ∼6–18 Å thick. These films are reactive towards gas-phase OH radicals and decay exponentially, with bimolecular rate constants for reaction with gas-phase OH radicals of typically 0.08–1.5 × 10−10 cm3 molecule−1 s−1. These bimolecular rate constants equate to initial OH radical uptake coefficients estimated to be ∼0.6–1 except woodsmoke (∼0.05). The film thickness and the neutron scattering length density of the extracted atmosphere aerosol material (from urban, remote and wood burning) were measured by neutron reflection as they were exposed to OH radicals. For the first time neutron reflection has been demonstrated as an excellent technique for studying the thin films formed at air–water interfaces from materials extracted from atmospheric aerosol samples. Additionally, the kinetics of gas-phase OH radicals with a proxy compound, the lipid 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) was studied displaying significantly different behaviour, thus demonstrating it is not a good proxy for atmospheric materials that may form films at the air–water interface. The atmospheric lifetimes, with respect to OH radical oxidation, of the insoluble organic materials extracted from atmospheric aerosol at the air–water interface were a few hours. Relative to a possible physical atmospheric lifetime of 4 days, the oxidation of these films is important and needs inclusion in atmospheric models. The optical properties of these films were previously reported [Shepherd et al., Atmos. Chem. Phys., 2018, 18, 5235–5252] and there is a significant change in top of the atmosphere albedo for these thin films on core–shell atmospheric aerosol using the film thickness data and confirmation of stable film formation at the air–water interface presented here

Neutron reflection study of the adsorption of the phosphate surfactant NaDEHP onto alumina from water.

The adsorption of a phosphorus analogue of the surfactant AOT, sodium bis(2-ethylhexyl) phosphate (NaDEHP), at the water/alumina interface is described. The material is found to adsorb as an essentially water-free bilayer from neutron reflection measurements. This is similar to the behavior of AOT under comparable conditions, although AOT forms a thicker, more hydrated layer. The NaDEHP shows rather little variation with added salt, but a small thickening of the layer on increasing the pH, in contrast to the behavior of AOT.We thank BP plc and EPSRC for financial support for this work as well as the ISIS and ILL staff and scientists for the allocation of beam time and technical assistance with NR measurements. We also appreciate Chris Sporikou at Department of Chemistry, University of Cambridge, for help with the surfactant synthesis.This is the final version of the article. It first appeared at http://dx.doi.org/10.1021/la504837

Polarized Neutron Reflectometry of Nickel Corrosion Inhibitors.

Polarized neutron reflectometry has been used to investigate the detailed adsorption behavior and corrosion inhibition mechanism of two surfactants on a nickel surface under acidic conditions. Both the corrosion of the nickel surface and the structure of the adsorbed surfactant layer could be monitored in situ by the use of different solvent contrasts. Layer thicknesses and roughnesses were evaluated over a range of pH values, showing distinctly the superior corrosion inhibition of one negatively charged surfactant (sodium dodecyl sulfate) compared to a positively charged example (dodecyl trimethylammonium bromide) due to its stronger binding interaction with the surface. It was found that adequate corrosion inhibition occurs at significantly less than full surface coverage.X-ray photoelectron spectra were obtained at the National Engineering and Physical Sciences Research Council (EPSRC) XPS User’s Service (NEXUS) at Newcastle University, an EPSRC midrange facility. NR data were obtained on the D17 instrument, and samples were treated in the laboratories of the Partnership for Soft Condensed Matter (PSCM) at the Institut Laue-Langevin. M.H.W. is grateful for funding from the Oppenheimer Trust.This is the final version of the article. It first appeared from the American Chemical Society via http://dx.doi.org/10.1021/acs.langmuir.5b0171

The development and validation of a scoring tool to predict the operative duration of elective laparoscopic cholecystectomy

Background: The ability to accurately predict operative duration has the potential to optimise theatre efficiency and utilisation, thus reducing costs and increasing staff and patient satisfaction. With laparoscopic cholecystectomy being one of the most commonly performed procedures worldwide, a tool to predict operative duration could be extremely beneficial to healthcare organisations. Methods: Data collected from the CholeS study on patients undergoing cholecystectomy in UK and Irish hospitals between 04/2014 and 05/2014 were used to study operative duration. A multivariable binary logistic regression model was produced in order to identify significant independent predictors of long (> 90 min) operations. The resulting model was converted to a risk score, which was subsequently validated on second cohort of patients using ROC curves. Results: After exclusions, data were available for 7227 patients in the derivation (CholeS) cohort. The median operative duration was 60 min (interquartile range 45–85), with 17.7% of operations lasting longer than 90 min. Ten factors were found to be significant independent predictors of operative durations > 90 min, including ASA, age, previous surgical admissions, BMI, gallbladder wall thickness and CBD diameter. A risk score was then produced from these factors, and applied to a cohort of 2405 patients from a tertiary centre for external validation. This returned an area under the ROC curve of 0.708 (SE = 0.013, p  90 min increasing more than eightfold from 5.1 to 41.8% in the extremes of the score. Conclusion: The scoring tool produced in this study was found to be significantly predictive of long operative durations on validation in an external cohort. As such, the tool may have the potential to enable organisations to better organise theatre lists and deliver greater efficiencies in care

Influence of surfactants on a pre-adsorbed cationic layer: Removal and modification.

Removal of organic species from solid surfaces is a crucial process. The use of oppositely charged surfactants provides a potential method for enhanced removal. Neutron reflectometry has been used to investigate the complex behaviour of a pre-adsorbed and tenacious layer of the cationic surfactant didodecyldimethylammonium bromide (DDAB) on a mica surface, during exposure to different organic species in solution. The anionic surfactant sodium dodecylsulfate (SDS) was shown to be able to remove the cationic layer, but only if anionic micelles were present in solution. To facilitate comparison with the behaviour of a non-ionic surfactant, the direct adsorption of pentaethylene glycol monododecyl ether (C12E5) to mica was also studied; low surface coverage adsorption was seen at the critical micelle concentration and above. C12E5 was then found not to remove the cationic layer, but did include into the layer to some degree. The presence of cationic surfactant on the mica was however shown to significantly modify the adsorption behaviour of the non-ionic surfactant.BP plc as part of EPSRC iCASE awar

Spontaneous Formation of Cushioned Model Membranes Promoted by an Intrinsically Disordered Protein

In this article, it is shown that by exposing commonly used lipids for biomembrane mimicking studies, to a solution containing the histidine-rich intrinsically disordered protein histatin 5, a protein cushion spontaneously forms underneath the bilayer. The underlying mechanism is attributed to have an electrostatic origin, and it is hypothesized that the observed behavior is due to proton charge fluctuations promoting attractive electrostatic interactions between the positively charged proteins and the anionic surfaces, with concomitant counterion release. Hence, we anticipate that this novel "green" approach of forming cushioned bilayers can be an important tool to mimic the cell membrane without the disturbance of the solid substrate, thereby achieving a further understanding of protein-cell interactions