1,923 research outputs found

    Low carbon housing: lessons from Elm Tree Mews

    Get PDF
    This report sets out the findings from a low carbon housing trial at Elm Tree Mews, York, and discusses the technical and policy issues that arise from it. The Government has set an ambitious target for all new housing to be zero carbon by 2016. With the application of good insulation, improved efficiencies and renewable energy, this is theoretically possible. However, there is growing concern that, in practice, even existing carbon standards are not being achieved and that this performance gap has the potential to undermine zero carbon housing policy. The report seeks to address these concerns through the detailed evaluation of a low carbon development at Elm Tree Mews. The report: * evaluates the energy/carbon performance of the dwellings prior to occupation and in use; * analyses the procurement, design and construction processes that give rise to the performance achieved; * explores the resident experience; * draws out lessons for the development of zero carbon housing and the implications for government policy; and * proposes a programme for change, designed to close the performance gap

    Evidence for heat losses via party wall cavities in masonry construction

    Get PDF
    This paper presents empirical evidence and analysis that supports the existence of a significant heat loss mechanism resulting from air movement through cavities in party walls in masonry construction. A range of heat loss experiments were undertaken as part of the Stamford Brook housing field trial in Altrincham in the United Kingdom. Co-heating tests showed a large discrepancy between the predicted and measured whole house heat loss coefficients. Analysis of the co-heating results, along with internal temperature data, thermal imaging and a theoretical analysis indicated that the most likely explanation for the discrepancy was bypassing of the thermal insulation via the uninsulated party wall cavities. The data show that such a bypass mechanism is potentially the largest single contributor to heat loss in terraced dwellings built to the 2006 revision of the Building Regulations. A comparable convective heat bypass associated with masonry party walls was identified in the late 1970s during the course of the Twin Rivers Project in the United States, albeit in a somewhat different construction from that used at Stamford Brook. A similar effect was also reported in the United Kingdom in the mid 1990s. However, it appears that no action was taken at that time either to confirm the results, to develop any technical solutions, or to amend standards for calculating heat losses from buildings. Current conventions for heat loss calculations in the United Kingdom do not take account of heat losses associated with party walls and it is suggested by the authors that such conventions may need to be updated to take account of the effect described in this paper. In the final part of the paper, the authors propose straightforward solutions to prevent bypassing of roof insulation via party walls by for example filling the cavity of the party wall with mineral fibre insulation, or by inserting a cavity closer across the cavity in the plane of the roof insulation.Practical application: The heat bypass mechanism described in this paper is believed by the authors to contribute to a significant proportion of heat loss from buildings in the UK constructed with clear cavities such as those found in separating walls between cavity masonry dwellings. It is proposed that relatively simple design changes could be undertaken to eliminate such heat loss pathways from new buildings. In addition, simple and cost effective measures are envisaged that could be used to minimise or eliminate the bypass from existing buildings. Such an approach could give rise to a significant reduction in carbon emissions from UK housing

    Airtightness of buildings — towards higher performance: Final Report — Domestic Sector Airtightness

    Get PDF
    This report constitutes milestone D11 — Final Report — Domestic Sector Airtightness of the Communities and Local Government/ODPM Project reference CI 61/6/16 (BD2429) Airtightness of Buildings — Towards Higher Performance (Borland and Bell, 2003). This report presents the overall conclusions and key messages obtained from the project through design assessments, construction observations, discussions with developers and pressurisation test results. It also summarises discussion on the airtight performance of current UK housing, the implementation and impact of current and future legislation, and identifies potential areas for future work

    Evaluating the impact of an enhanced energy performance standard on load-bearing masonry domestic construction: Understanding the gap between designed and real performance: lessons from Stamford Brook.

    Get PDF
    This report is aimed at those with interests in the procurement, design and construction of new dwellings both now and in the coming years as the Government’s increasingly stringent targets for low and zero carbon housing approach. It conveys the results of a research project, carried out between 2001 and 2008, that was designed to evaluate the extent to which low carbon housing standards can be achieved in the context of a large commercial housing development. The research was led by Leeds Metropolitan University in collaboration with University College London and was based on the Stamford Brook development in Altrincham, Cheshire. The project partners were the National Trust, Redrow and Taylor Wimpey and some 60 percent of the planned 700 dwelling development has been completed up to June 2008. As the UK house building industry and its suppliers grapple with the challenges of achieving zero carbon housing by 2016, the lessons arising from this project are timely and of considerable value. Stamford Brook has demonstrated that designing masonry dwellings to achieve an enhanced energy standard is feasible and that a number of innovative approaches, particularly in the area of airtightness, can be successful. The dwellings, as built, exceed the Building Regulations requirements in force at the time but tests on the completed dwellings and longer term monitoring of performance has shown that, overall, energy consumption and carbon emissions, under standard occupancy, are around 20 to 25 percent higher than design predictions. In the case of heat loss, the discrepancy can be much higher. The report contains much evidence of considerable potential but points out that realising the design potential requires a fundamental reappraisal of processes within the industry from design and construction to the relationship with its supply chain and the development of the workforce. The researchers conclude that, even when builders try hard, current mainstream technical and organisational practices together with industry cultures present barriers to consistent delivery of low and zero carbon performance. They suggest that the underlying reasons for this are deeply embedded at all levels of the house building industry. They point out also that without fundamental change in processes and cultures, technological innovations, whether they be based on traditional construction or modern methods are unlikely to reach their full potential. The report sets out a series of wide ranging implications for new housing in the UK, which are given in Chapter 14 and concludes by firmly declaring that cooperation between government, developers, supply chains, educators and researchers will be crucial to improvement. The recommendations in this report are already being put into practice by the researchers at Leeds Metropolitan University and University College London in their teaching and in further research projects. The implications of the work have been discussed across the industry at a series of workshops undertaken in 2008 as part of the LowCarb4Real project (see http://www.leedsmet.ac.uk/as/cebe/projects/lowcarb4real/index.htm). In addition, the learning is having an impact on the work of the developers (Redrow and Taylor Wimpey) who, with remarkable foresight and enthusiasm, hosted the project. This report seeks to make the findings more widely available and is offered for consideration by everyone who has a part to play in making low and zero carbon housing a reality

    Metabolic profile of long-distance migratory flight and stopover in a shorebird

    Get PDF
    Migrating birds often complete long non-stop flights during which body energy stores exclusively support energetic demands. The metabolic correlates of such long-distance travel in free-living migrants are as yet poorly studied. Bar-tailed godwits, Limosa lapponica taymyrensis, undertake a 4500 km flight to their single spring stopover site and thus provide an excellent model in which to determine the energy fuels associated with endurance travel. To this end, we evaluated plasma concentrations of six key metabolites in arriving godwits caught immediately upon landing near their stopover site. Initial metabolite levels were compared with levels after 5 h of inactive rest to determine how flight per se affects energy metabolism. Birds refuelling on the stopover site were also examined. Arriving godwits displayed elevated plasma free fatty acids, glycerol and butyrate, confirming the importance of lipid fuel in the support of extended migratory activity. Furthermore, elevated plasma triglycerides in these birds suggest that fatty acid provisioning is facilitated through hepatic synthesis and release of neutral lipids, as previously hypothesized for small migrants with high mass-specific metabolic rates. Finally, elevations in plasma uric acid suggest that protein breakdown contributes to the support of long-distance movement, to possibly maintain citric acid cycle intermediates, gluconeogenesis and/or water balance

    Bark beetle population dynamics in the Anthropocene: Challenges and solutions

    Get PDF
    Tree-killing bark beetles are the most economically important insects in conifer forests worldwide. However, despite N200 years of research, the drivers of population eruptions and crashes are still not fully understood and the existing knowledge is thus insufficient to face the challenges posed by the Anthropocene. We critically analyze potential biotic and abiotic drivers of population dynamics of an exemplary species, the European spruce bark beetle (ESBB) (Ips typographus) and present a multivariate approach that integrates the many drivers governing this bark beetle system. We call for hypothesis-driven, large-scale collaborative research efforts to improve our understanding of the population dynamics of this and other bark beetle pests. Our approach can serve as a blueprint for tackling other eruptive forest insects

    Species of Botryosphaeriaceae occurring on Proteaceae

    Get PDF
    The Botryosphaeriaceae includes several species that are serious canker and leaf pathogens of Proteaceae. In the present study, sequence data for the ITS nrDNA region were used in conjunction with morphological observations to resolve the taxonomy of species of Botryosphaeriaceae associated with Proteaceae. Neofusicoccum luteum was confirmed from Buckinghamia and Banksia in Australia, and on Protea cynaroides in South Africa. A major pathogen of Banksia coccinea in Australia was shown to be N. australe and not N. luteum as previously reported. Neofusicoccum protearum was previously reported on Proteaceae from Australia, Madeira, Portugal and South Africa, and is shown here to also occur in Hawaii and Tenerife (Canary Islands). Furthermore, several previous records of N. ribis on Proteaceae were shown to be N. parvum. Saccharata capensis is described as a new species that is morphologically similar to S. proteae. There is no information currently available regarding its potential importance as plant pathogen and pathogenicity tests should be conducted with it in the future

    Chromium sequencing: The doors open for genomics of obligate plant pathogens

    Get PDF
    It is challenging to sequence and assemble genomes of obligate plant pathogens and microorganisms because of limited amounts of DNA, comparatively large genomes and high numbers of repeat regions. We sequenced the 1.2 gigabase genome of an obligate rust fungus, Austropuccinia psidii, the cause of rust on Myrtaceae, with a Chromium 10X library. This technology has mostly been applied for single-cell sequencing in immunological studies of mammals. We compared scaffolds of a genome assembled from the Chromium library with one assembled from combined paired-end and mate-pair libraries, sequenced with Illumina HiSeq. Chromium 10X provided a superior assembly, in terms of number of scaffolds, N50 and number of genes recovered. It required less DNA than other methods and was sequenced and assembled at a lower cost. Chromium sequencing could provide a solution to sequence and assemble genomes of obligate plant pathogens where the amount of available DNA is a limiting factor. © 2018 Future Science. All rights reserved

    Ophiostoma denticiliatum sp. nov. and other Ophiostoma species associated with the birch bark beetle in southern Norway

    Get PDF
    Ophiostomatoid fungi were isolated from Scolytus ratzeburgi infesting Betula pendula and B. pubescens in Norway. Fungi were identified based on morphology, DNA sequence comparison for two gene regions and phylogenetic analyses. The most abundant fungus was Ophiostoma karelicum, suggesting a specific relationship between the fungus, the vector insect and the host tree. Our results suggest that O. karelicum occurs across the geographic range of S. ratzeburgi and its close relatedness to the Dutch elm disease fungi suggests that it could be important if introduced into other parts of the world. Other fungi, only occasionally isolated from S. ratzeburgi, were identified as O. quercus and a novel taxon, described here as O. denticiliatum sp. nov
    corecore