High-power test results of a 3 GHz single-cell cavity

Compact, reliable and little consuming accelerators are required for the treatment of tumours with ions. TERA proposes the "cyclinac", composed of a high-frequency, fast-cycling linac which boosts the energy of the particles previously accelerated in a cyclotron. The dimensions of the linac can be reduced if high gradients are used. TERA initiated a high-gradient test program to understand the operational limit of such structures. The program foresees the design, prototyping and high-power test of several high-gradient structures operating at 3 and 5.7 GHz. The high-power tests of the 3 GHz single-cell cavity were completed in Winter 2012. The maximum BDR threshold measured for Emax of 170 MV/m and RF pulses of 2.5 \mu s was 3 x 10-6 bpp/m

Design and vertical tests of double-quarter wave cavity prototypes for the high-luminosity LHC crab cavity system

Crab crossing is essential for high-luminosity colliders. The high-luminosity Large Hadron Collider (HL-LHC) will equip one of its interaction points (IP1) with double-quarter wave (DQW) crab cavities. A DQW cavity is a new generation of deflecting rf cavities that stands out for its compactness and broad frequency separation between fundamental and first high-order modes. The deflecting kick is provided by its fundamental mode. Each HL-LHC DQW cavity shall provide a nominal deflecting voltage of 3.4 MV, although up to 5.0 MV may be required. A proof-of-principle (POP) DQW cavity was limited by quench at 4.6 MV. This paper describes a new, highly optimized cavity, designated the DQW SPS series, which satisfies dimensional, cryogenic, manufacturing, and impedance requirements for beam tests at the Super Proton Synchrotron (SPS) and operation in the LHC. Two prototypes of this DQW SPS series were fabricated by U.S. industry and cold tested after following a conventional superconducting radio-frequency surface treatment. Both units outperformed the POP cavity, reaching a deflecting voltage of 5.3–5.9 MV. This voltage—the highest reached by a DQW cavity—is well beyond the nominal voltage of 3.4 MV and may even operate at the ultimate voltage of 5.0 MV with a sufficient margin. This paper covers fabrication, surface preparation, and cryogenic rf test results and implications

TERA high gradient test program of RF cavities for medical linear accelerators

The scientific community and the medical industries are putting a considerable effort into the design of compact, reliable and cheap accelerators for hadrontherapy. Up to now only circular accelerators are used to deliver beams with energies suitable for the treatment of deep seated tumors. The TERA Foundation has proposed and designed a hadrontherapy facility based on the cyclinac concept: a high gradient linear accelerator placed downstream of a cyclotron used as an injector. The overall length of the linac, and therefore its final cost, is almost inversely proportional to the average accelerating gradient achieved in the linac

Design and Vertical Tests of SPS-series Double-Quarter Wave (DQW) Cavity Prototypes for the HL-LHC Crab Cavity System

Crab crossing is essential for high-luminosity colliders. The High Luminosity Large Hadron Collider (HL-LHC) will equip one of its Interaction Points (IP1) with Double-Quarter Wave (DQW) crab cavities. A DQW cavity is a new generation of deflecting RF cavities that stands out for its compactness and broad frequency separation between fundamental and first high-order modes. The deflecting kick is provided by its fundamental mode. Each HL-LHC DQW cavity shall provide a nominal deflecting voltage of 3.4 MV, although up to 5.0 MV may be required. A Proof-of-Principle (PoP) DQW cavity was limited by quench at 4.6 MV. This paper describes a new, highly optimized cavity, designated DQW SPS-series, which satisfies dimensional, cryogenic, manufacturing and impedance requirements for beam tests at SPS and operation in LHC. Two prototypes of this DQW SPS-series were fabricated by US industry and cold tested after following conventional SRF surface treatment. Both units outperformed the PoP cavity, reaching a deflecting voltage of 5.3-5.9 MV. This voltage - the highest reached by a DQW cavity - is well beyond the nominal voltage of 3.4 MV and may even operate at the ultimate voltage of 5.0MVwith sufficient margin. This paper covers fabrication, surface preparation and cryogenic RF test results and implications

Crab Cavities for ILC

For the 14 mrad crossing angle proposed, crab cavity systems are fundamentally anticipated for the viable operation of the International Linear Collider (ILC), in order to maximise its luminosity performance. Since 2021, a specialist development team have been defining optimum crab cavity technologies which can fulfil the operational requirements for ILC, both for its baseline centre-of-mass energy of 250 GeV, but also extending those requirements out to higher beam collision intensities. Five design teams have established crab cavity technology solutions, which have the capability to also operate up to 1 TeV centre-of-mass. This presentation showcases the key performance capabilities of these designs and their associated benefits for both manufacture and integration into the ILC Interaction Point. The recommended outcome of the recently conducted crab cavity technology down-selection, will also be highlighted

Evolution of innovation policy in Emilia-Romagna and Valencia: Similar reality, similar results?

This is an author's accepted manuscript of an article published in: “European Planning Studies"; Volume 22, Issue 11, 2014; copyright Taylor & Francis; available online at: http://dx.doi.org/10.1080/09654313.2013.831398[EN] This paper examines the evolution of regional innovation policy in Emilia-Romagna and Valencia, two regions with similar economic features that implemented close innovation policies in the 1970s and 1980s. We investigate whether their similarities have led to parallel targets, policy tools and governance developments. We show that innovation policy in both regions suffered from the effects of privatization, budget constraints and changes to manufacturing during the 1990s and we highlight the consequences. Although Emilia-Romagna experienced deeper changes to its innovation policy, privatizations and/or the replacement of public funds promoted commercial approaches and induced market failures in both regions. The worst effects of these policies were the implementation of less-risky innovation projects, the shift towards extraregional projects and markets, and the favouring of large firms.López Estornell, M.; Barberá Tomás, JD.; Garcia Reche, A.; Mas Verdú, F. (2013). Evolution of innovation policy in Emilia-Romagna and Valencia: Similar reality, similar results?. European Planning Studies. 22(11):2287-2304. doi:10.1080/09654313.2013.831398S22872304221

Burkitt-like lymphoma with 11q aberration: A germinal center derived lymphoma genetically unrelated to Burkitt lymphoma

Burkitt-like lymphoma with 11q aberration is characterized by pathological features and gene expression profile resembling Burkitt lymphoma but lack MYC rearrangement and carries an 11q-arm aberration with proximal gains and telomeric losses. Whether these lymphomas are a distinct category or a particular variant of other recognized entities is controversial. To improve the understanding of Burkitt-like lymphoma with 11q aberration we have performed an analysis of copy number alterations and targeted sequencing of a large panel of B-cell lymphoma related genes in 11 cases. Most patients had localized nodal disease and a favourable outcome after therapy. Histologically, they were high grade B-cell lymphoma, not otherwise specified (8 cases), diffuse large B-cell lymphoma (2 cases) and only one was considered as atypical Burkitt lymphoma. All cases had a germinal center B-cell signature and phenotype with frequent LMO2 expression. Burkitt-like lymphoma with 11q aberration had frequent gains of 12q12-q21.1 and losses of 6q12.1-q21, and lacked common Burkitt lymphoma or diffuse large B-cell lymphoma alterations. Potential driver mutations were found in 27 genes, particularly involving BTG2, DDX3X, ETS1, EP300, and GNA13. However, ID3, TCF3, or CCND3 mutations were absent in all cases. These results suggest that Burkitt-like lymphoma with 11q aberration is a germinal center derived lymphoma closer to high grade B-cell lymphoma or diffuse large B-cell lymphoma rather than Burkitt lymphoma.Copyright © 2019, Ferrata Storti Foundation

CIBERER : Spanish national network for research on rare diseases: A highly productive collaborative initiative

Altres ajuts: Instituto de Salud Carlos III (ISCIII); Ministerio de Ciencia e Innovación.CIBER (Center for Biomedical Network Research; Centro de Investigación Biomédica En Red) is a public national consortium created in 2006 under the umbrella of the Spanish National Institute of Health Carlos III (ISCIII). This innovative research structure comprises 11 different specific areas dedicated to the main public health priorities in the National Health System. CIBERER, the thematic area of CIBER focused on rare diseases (RDs) currently consists of 75 research groups belonging to universities, research centers, and hospitals of the entire country. CIBERER's mission is to be a center prioritizing and favoring collaboration and cooperation between biomedical and clinical research groups, with special emphasis on the aspects of genetic, molecular, biochemical, and cellular research of RDs. This research is the basis for providing new tools for the diagnosis and therapy of low-prevalence diseases, in line with the International Rare Diseases Research Consortium (IRDiRC) objectives, thus favoring translational research between the scientific environment of the laboratory and the clinical setting of health centers. In this article, we intend to review CIBERER's 15-year journey and summarize the main results obtained in terms of internationalization, scientific production, contributions toward the discovery of new therapies and novel genes associated to diseases, cooperation with patients' associations and many other topics related to RD research

High gradient test of a 3 GHz single-cell cavity

Pro­ton and car­bon ion beams pre­sent ad­van­ta­geous depth-dose dis­tri­bu­tions with re­spect to X-rays. Car­bon ions allow a bet­ter con­trol of "ra­diore­sis­tant" tu­mours due to their high­er bi­o­log­i­cal re­sponse. For deep-seat­ed tu­mours pro­ton and car­bon ion beams of some nA and en­er­gies of about 200 MeV and 400 MeV/u re­spec­tive­ly are need­ed. For these ap­pli­ca­tions TERA pro­posed the "cy­clinac": a high-fre­quen­cy linac which boosts the hadrons ac­cel­er­at­ed by a cy­clotron. The di­men­sions of the com­plex can be re­duced if high­er ac­cel­er­at­ing gra­di­ents are achieved in the linac. To test the max­i­mum achiev­able fields, a 3 GHz cav­i­ty has been built by TERA. The 19 mm-long cell is fore­seen to be ex­cit­ed at 200 Hz by 3 us RF puls­es and should reach a 40 MV/m ac­cel­er­at­ing gra­di­ent, which cor­re­sponds to a peak sur­face elec­tric field Es of 260 MV/m. In a first high-pow­er test per­formed at CTF3 the cell was op­er­at­ed at 50 Hz with a max­i­mum peak power of 1 MW. The max­i­mum Es achieved was above 350 MV/m. The break­down rate at these field val­ues was around 10-1 bpp/m. The max­i­mum value of the mod­i­fied Poynt­ing vec­tor is close to the best val­ues achieved by high gra­di­ent struc­tures at 12 and 30 GHz