Monolithic mass sensor fabricated using a conventional technology with attogram resolution in air conditions

Premi a l'excel·lència investigadora. Àmbit de les Ciències Tecnològiques. 2008Monolithic mass sensors for ultrasensitive mass detection in air conditions have been fabricated using a conventional 0.35 μm complementary metal-oxide-semiconductor (CMOS) process. The mass sensors are based on electrostatically excited submicrometer scale cantilevers integrated with CMOS electronics. The devices have been calibrated obtaining an experimental sensitivity of 6×10−11 g/cm2 Hz equivalent to 0.9 ag/Hz for locally deposited mass. Results from time-resolved mass measurements are also presented. An evaluation of the mass resolution have been performed obtaining a value of 2.4×10−17 g in air conditions, resulting in an improvement of these devices from previous works in terms of sensitivity, resolution, and fabrication process complexity

Procedimientos de criba para la escoliosis

754 escolares, de 5 o y 8o de EGB, han sido explorados para detectar escoliosis importantes. Las técnicas de exploración han sido dos: la «Prueba de Inclinarse hacia Adelante» (PIA) y mediante el uso del Inclinómetro (IN). Los resultados obtenidos son los siguientes: la PIA ha mostrado que el 43 % de los escolares tenía una actitud escoliótica, el IN ha revelado que el 5,5 % de los escolares presentaban un ángulo de inclinación comprendido entre 5o y 10° y sólo el 1,85 % lo tenían mayor de 10o . Diversos autores han establecido que sólo uno de cada 300 niños es tributario de algún tipo de tratamiento para la escoliosis. A la vista de nuestros resultados, se considera que la PIA es inaceptable por el elevado porcentaje de falsos positivos que debe de dar.The screening test for scoliosis was performed on 754 schoolchildren aged 11 and 14 years. Two screening tests were performed: the «Forward Bending Test» (FBT) and the Inclinometer (IN). Through FBT scoliosis was detected in 43 % of these children. The inclinometer measurement was between 5 o and 10o in a 5,5 % and morethan 10° in a 1,85 %. Otheraut hors consider that treatment ¡s mandatory in 1/300 children. So, the FBT is not acceptable as a screening test

Modularity, criticality, and evolvability of a developmental gene regulatory network

The existence of discrete phenotypic traits suggests that the complex regulatory processes which produce them are functionally modular. These processes are usually represented by networks. Only modular networks can be partitioned into intelligible subcircuits able to evolve relatively independently. Traditionally, functional modularity is approximated by detection of modularity in network structure. However, the correlation between structure and function is loose. Many regulatory networks exhibit modular behaviour without structural modularity. Here we partition an experimentally tractable regulatory network—the gap gene system of dipteran insects—using an alternative approach. We show that this system, although not structurally modular, is composed of dynamical modules driving different aspects of whole-network behaviour. All these subcircuits share the same regulatory structure, but differ in components and sensitivity to regulatory interactions. Some subcircuits are in a state of criticality, while others are not, which explains the observed differential evolvability of the various expression features in the system

VHF band-pass filter based on a single CMOS-MEMS doubleended tuning fork resonator

AbstractThis paper presents a single Double-Ended Tuning Fork (DETF) MEMS resonator-based band-pass filter fabricated on a commercial standard CMOS technology. The accurate design of this resonator demonstrates the ability to perform filtering without the need of coupling multiple resonators. The main characteristic is to define the out-of-phase mode resonance frequency of the DETF smaller than the in-phase mode frequency. The electrical characterization shows that this stand-alone band-pass filter presents a 44.4MHz central frequency with a 0.6% bandwidth in air

Characterization of the response to zinc deficiency in the cyanobacterium Anabaena sp. strain PCC 7120

Zur regulators control zinc homeostasis by repressing target genes under zinc-sufficient conditions in a wide variety of bacteria. This paper describes how part of a survey of duplicated genes led to the identification of the open reading frame all2473 as the gene encoding the Zur regulator of the cyanobacterium Anabaena sp. strain PCC 7120. All2473 binds to DNA in a zinc-dependent manner, and its DNA-binding sequence was characterized, which allowed us to determine the relative contribution of particular nucleotides to Zur binding. A zur mutant was found to be impaired in the regulation of zinc homeostasis, showing sensitivity to elevated concentrations of zinc but not other metals. In an effort to characterize the Zur regulon in Anabaena, 23 genes containing upstream putative Zur-binding sequences were identified and found to be regulated by Zur. These genes are organized in six single transcriptional units and six operons, some of them containing multiple Zur-regulated promoters. The identities of genes of the Zur regulon indicate that Anabaena adapts to conditions of zinc deficiency by replacing zinc metalloproteins with paralogues that fulfill the same function but presumably with a lower zinc demand, and with inducing putative metallochaperones and membrane transport systems likely being involved in the scavenging of extracellular zinc, including plasma membrane ABC transport systems and outer membrane TonB-dependent receptors. Among the Zur-regulated genes, the ones showing the highest induction level encode proteins of the outer membrane, suggesting a primary role for components of this cell compartment in the capture of zinc cations from the extracellular medium.Ministerio de Ciencia e Innovación y Fondo Social Europeo BFU2007-66589/BMC BFU2010-19544Junta de Andalucía y FEDER P07-CVI-0316

The neural basis of perceived intensity in natural and artificial touch

Electrical stimulation of sensory nerves is a powerful tool for studying neural coding because it can activate neural populations in ways that natural stimulation cannot. Electrical stimulation of the nerve has also been used to restore sensation to patients who have suffered the loss of a limb. We have used long-term implanted electrical interfaces to elucidate the neural basis of perceived intensity in the sense of touch. To this end, we assessed the sensory correlates of neural firing rate and neuronal population recruitment independently by varying two parameters of nerve stimulation: pulse frequency and pulse width. Specifically, two amputees, chronically implanted with peripheral nerve electrodes, performed each of three psychophysical tasks-intensity discrimination, magnitude scaling, and intensity matching-in response to electrical stimulation of their somatosensory nerves. We found that stimulation pulse width and pulse frequency had systematic, cooperative effects on perceived tactile intensity and that the artificial tactile sensations could be reliably matched to skin indentations on the intact limb. We identified a quantity we termed the activation charge rate (ACR), derived from stimulation parameters, that predicted the magnitude of artificial tactile percepts across all testing conditions. On the basis of principles of nerve fiber recruitment, the ACR represents the total population spike count in the activated neural population. Our findings support the hypothesis that population spike count drives the magnitude of tactile percepts and indicate that sensory magnitude can be manipulated systematically by varying a single stimulation quantity

Frequency fluctuations in silicon nanoresonators

Frequency stability is key to performance of nanoresonators. This stability is thought to reach a limit with the resonator's ability to resolve thermally-induced vibrations. Although measurements and predictions of resonator stability usually disregard fluctuations in the mechanical frequency response, these fluctuations have recently attracted considerable theoretical interest. However, their existence is very difficult to demonstrate experimentally. Here, through a literature review, we show that all studies of frequency stability report values several orders of magnitude larger than the limit imposed by thermomechanical noise. We studied a monocrystalline silicon nanoresonator at room temperature, and found a similar discrepancy. We propose a new method to show this was due to the presence of frequency fluctuations, of unexpected level. The fluctuations were not due to the instrumentation system, or to any other of the known sources investigated. These results challenge our current understanding of frequency fluctuations and call for a change in practices