Role of surface recombination in perovskite solar cells at the interface of HTL/CH3NH3PbI3

In order to achieve the highest performance of organometal trihalide perovskite solar cells, it is required to recognize the dominant mechanisms which play a key role in a perovskite material. In the following studies, we have focused on the interfacial recombination between the hole transporting layer (HTL) and the perovskite CH3NH3PbI3 in solar cell devices with p–i–n architecture. It has been shown that Cu:NiOx used as HTL drastically decreases a short–circuit photocurrent (Jsc) and an open–circuit voltage (Voc). However, we have found that an addition of PTAA thin layer improves cells quality and, as a consequence, the efficiency of such solar cells increases by 2%. Here, we explain both Jsc and Voc losses with a theory of the "dead layer" of perovskite material where a very high surface recombination occurs. We demonstrate the numerical and experimental studies by the means of series detailed analyses to get in–depth understanding of the physical processes behind it. Using a drift–diffusion model, it is shown that the presence of a parasitic recombination layer influences mostly the current distribution in the simulated samples explaining Jsc and Voc losses. The following results could be useful for improving the quality of perovskite solar cells

Crystalline silicon solar cells with thin poly-SiO_x carrier-selective passivating contacts for perovskite/c-Si tandem applications

Single junction crystalline silicon (c-Si) solar cells are reaching their practical efficiency limit whereas perovskite/c-Si tandem solar cells have achieved efficiencies above the theoretical limit of single junction c-Si solar cells. Next to low-thermal budget silicon heterojunction architecture, high-thermal budget carrier-selective passivating contacts (CSPCs) based on polycrystalline-SiOx (poly-SiOx) also constitute a promising architecture for high efficiency perovskite/c-Si tandem solar cells. In this work, we present the development of c-Si bottom cells based on high temperature poly-SiOx CSPCs and demonstrate novel high efficiency four-terminal (4T) and two-terminal (2T) perovskite/c-Si tandem solar cells. First, we tuned the ultra-thin, thermally grown SiOx. Then we optimized the passivation properties of p-type and n-type doped poly-SiOx CSPCs. Here, we have optimized the p-type doped poly-SiOx CSPC on textured interfaces via a two-step annealing process. Finally, we integrated such bottom solar cells in both 4T and 2T tandems, achieving 28.1% and 23.2% conversion efficiency, respectively.</p

Echinoderms from the Museum of Zoology from the Universidad de Costa Rica

El Museo de Zoología de la Universidad de Costa Rica (MZUCR) se funda en 1966 y alberga la colección de organismos vertebrados e invertebrados más completa de Costa Rica. El MZUCR cuenta actualmente con 24 colec-ciones que contienen más de cinco millones de especíme-nes, y más de 13 000 especies identificadas. Las primeras colecciones datan 1960 e incluyen peces, reptiles, anfibios, poliquetos, crustáceos y equinodermos. Para este último grupo, el MZUCR posee un total de 157 especies, en 1 173 lotes y 4 316 ejemplares. Estas 157 especies representan el 54% del total de especies de equinodermos que posee Costa Rica (293 especies). El resto de especies están repar-tidas en las siguientes instituciones: Academia de la Cien-cias de California (CAS) (4.8%), Instituto Oceanográfico Scripps (SIO) (5.2%), en la Colección Nacional de equino-dermos “Dra. Ma. Elena Caso” de la Universidad Nacional Autónoma de México (ICML-UNAM) (12.7%), Museo de Zoología Comparada de Harvard (MZC) (19.2%), y en el Museo Nacional de Historia Natural del Instituto Smithso-niano (USNM) (35.1%). Es posible que haya material de Costa Rica en el Museo de Historia Natural de Dinamarca (NCD) y en el Museo de Historia Natural de los Ángeles (LACM), sin embargo, no hubo acceso a dichas coleccio-nes. A su vez hay 9.6% de especies que no aparecen en ningún museo, pero están reportadas en la literatura. Con base en esta revisión de colecciones se actualizó el listado taxonómico de equinodermos para Costa Rica que consta de 293 especies, 152 géneros, 75 familias, 30 órdenes y cinco clases. La costa Pacífica de Costa Rica posee 153 especies, seguida por la isla del Coco con 134 y la costa Caribe con 65. Holothuria resultó ser el género más rico con 25 especies.The Museum of Zoology, Universidad de Costa Rica (MZUCR) was founded in 1966 and houses the most complete collection of vertebrates and invertebrates in Costa Rica. The MZUCR currently has 24 collections containing more than five million specimens, and more than 13 000 species. The earliest collections date back to 1960 and include fishes, reptiles, amphibians, polychaetes, crustaceans and echinoderms. For the latter group, the MZUCR has a total of 157 species, in 1 173 lots and 4 316 specimens. These 157 species represent 54% of the total species of echino-derms from Costa Rica. The remaining species are distributed in the following institutions: California Academy of Sciences (CAS) (4.8%), Scripps Oceanographic Institute (SIO) (5.2%), National Echinoderm Collection “Dr. Ma. Elena Caso” from the National Autonomous University of Mexico (ICML-UNAM) (12.7%), the National Museum of Natural History, Smithsonian Institute (USNM) (35.1%), and the Harvard Museum of Comparative Zoology (19.2%). There may be material from Costa Rica in the Natural History Museum of Denmark (NCD) and the Natural History Museum of Los Angeles (LACM), however, there was no access to such collections. There are 9.6% that do not appear in museums, but are reported in the literature. Based on this revision, the taxonomic list of echinoderms for Costa Rica is updated to 293 species, 152 genera, 75 families, 30 orders and 5 classes. The Pacific coast of Costa Rica has 153 species, followed by the Isla del Coco with 134 and the Caribbean coast with 65. Holothuria is the most diverse genus with 25 species.UCR::Vicerrectoría de Docencia::Ciencias Básicas::Facultad de Ciencias::Escuela de BiologíaUCR::Vicerrectoría de Investigación::Unidades de Investigación::Ciencias Básicas::Centro de Investigación en Ciencias del Mar y Limnología (CIMAR)UCR::Vicerrectoría de Investigación::Unidades de Investigación::Artes y Letras::Museo de la Universidad de Costa Ric

Validated Method for Evaluating the Four-Terminal Perovskite/Si Tandem Cell Performance and its Efficiency Potential

Recently perovskite/crystalline Si (cSi) tandem cells draw considerable attention because their high efficiency can reduce the levelized cost of electricity and increase the power density of photovoltaics (PVs) to accelerate the energy transition. While the theoretical limits for tandem cells are well known, the practical limits are less clear. Herein, a new method is presented to calculate the efficiency of a four-terminal (4T) tandem based on the performance of single-junction perovskite and cSi cells, using their detailed-balance efficiency fraction. This calculation method is validated with experiments on 4T perovskite/cSi tandem cells that provide a maximum efficiency of 28.0% and with the literature data available for similar configurations. A maximum efficiency of about 36% is estimated for 4T perovskite/cSi tandem cells that would use present record perovskite and cSi PV cells. This can be regarded as the practical efficiency limit for 4T perovskite/cSi tandem devices

Efficient and Thermally Stable Wide Bandgap Perovskite Solar Cells by Dual-Source Vacuum Deposition

Wide bandgap perovskites are being widely studied in view of their potential applications in tandem devices and other semitransparent photovoltaics. Vacuum deposition of perovskite thin films is advantageous as it allows the fabrication of multilayer devices, fine control over thickness and purity, and it can be upscaled to meet production needs. However, the vacuum processing of multicomponent perovskites (typically used to achieve wide bandgaps) is not straightforward, because one needs to simultaneously control several thermal sources during the deposition. Here a simplified dual-source vacuum deposition method to obtain wide bandgap perovskite films is shown. The solar cells obtained with these materials have similar or even larger efficiency as those including multiple A-cations, but are much more thermally stable, up to 3500 h at 85 °C for a perovskite with a bandgap of 1.64 eV. With optimized thickness, record efficiency of >19% and semitransparent devices with stabilized power output in excess of 17% are achieved

Perovskite contacting passivating barrier layer for solar cells

A hybrid organic -inorganic solar cell is provided that includes a substrate, a\u3cbr/\u3etransparent conductive oxide (TCO) layer deposited on the substrate, an n-type electron transport material (ETM) layer, a p-type hole transport material (HTM) layer, an i-type perovskite layer, and an electrode layer, where the substrate layers are arranged in an n-i-p stack, or a p-i-n stack, where the passivating\u3cbr/\u3ebarrier layer is disposed between the layers of the (i) perovskite and HTM, (ii)\u3cbr/\u3eperovskite and ETM, (iii) perovskite and HTM, and perovskite and ETM, or (iv)\u3cbr/\u3eTCO and ETM, and ETM and perovskite, and perovskite and HTM, or (v) substrate\u3cbr/\u3eand TCO, and TCO and ETM, and ETM and perovskite,and perovskite layer and\u3cbr/\u3eHTM, or (vi) a pair of ETM layers, or (vii) a pair of HTM layers

Using the Hand Laterality Judgement Task to assess motor imagery:a study of practice effects in repeated measurements

The aim of this study was to determine whether there is a practice effect on the Hand Laterality Judgement Task (HLJT). The HLJT task is a mental rotation task that can be used to assess motor imagery ability in stroke patients. Thirty-three healthy individuals performed the HLJT and two control tasks twice at a 3-week interval. Differences in the accuracy and the response times were analysed. The results for all three tasks showed a decrease in the response time between the first and the second assessments (8-20%), and, for the HLJT, also a small (3%) but relevant increase in accuracy. The most likely factor explaining this improvement is that of practice effects. This implies that an improvement in the HLJT scores found over time in clinical research may be partly because of a learning effect, which has to be taken into account when interpreting the results. It is likely that a practice effect occurs in repeated measurements of the HLJT. International Journal of Rehabilitation Research 35:278-280 (C) 2012 Wolters Kluwer Health vertical bar Lippincott Williams & Wilkins