Continental rifting parallel to ancient collisional belts: an effect of the mechanical anisotropy of the lithospheric mantle

International audienceAnalysis of major rift systems suggests that the preexisting structure of the lithosphere is a key parameter in the rifting process. Rift propagation is not random, but tends to follow the trend of the orogenic fabric of the plates, systematically reactivating ancient lithospheric structures. Continental rifts often display a clear component of strikeŝ lip deformation, in particular in the early rifting stage. Moreover, although the close temporal and spatial association between flood basalt eruption and continental breakup suggests that mantle plumes play an important role in the rifting process, there is a paradox between the pinpoint thermal and stress perturbation generated by an upwelling mantle plume and the planar geometry of rifts. These observations suggest that the deformation of the lithosphere, especially during rifting, is controlled by its preexisting structure. On the other hand, (1) the plasticity anisotropy of olivine single crystal and aggregates, (2) the strong crystallographic orientation of olivine observed in mantle xenoliths and lherzolite massifs, and (3) seismic anisotropy data, which require a tectonic fabric in the upper mantle coherent over large areas, suggest that preservation within the lithospheric mantle of a lattice preferred orientation (LPO) of olivine crystals may induce a large-scale mechanical anisotropy of the lithospheric mantle. We use a polycrystal plasticity model to investigate the effect of a preexisting mantle fabric on the continental breakup process. We assess the deformation of an anisotropic continental lithosphere in response to an axi-symmetric tensional stress field produced by an upwelling mantle plume by calculating the deformation of textured olivine polycrystals representative of the lithospheric mantle at different positions above a plume head. Model results show that a LPO-induced mechanical anisotropy of the lithospheric mantle may result in directional softening, leading to heterogeneous deformation. During continental rifting, this mechanical anisotropy may induce strain localisation in domains where extensional stress is oblique (30-55³) to the preexisting mantle fabric. This directional softening associated with olivine LPO frozen in the lithospheric mantle may also guide the propagation of the initial instability, that will follow the preexisting structural trend. The preexisting mantle fabric also controls the deformation regime, imposing a strong strike^slip shear component. A LPOinduced mechanical anisotropy may therefore explain the systematic reactivation of ancient collisional belts during rifting (structural inheritance), the plume^rift paradox, and the onset of transtension within continental rifts

Rheological heterogeneity, mechanical anisotropy and deformation of the continental lithosphere

International audienceThis paper aims to present an overview on the influence of rheological heterogeneity and mechanical anisotropy on the deformation of continents. After briefly recapping the concept of rheological stratification of the lithosphere, we discuss two specific issues: (1) as supported by a growing body of geophysical and geological observations, crust=mantle mechanical coupling is usually efficient, especially beneath major transcurrent faults which probably crosscut the lithosphere and root within the sublithospheric mantle; and (2) in most geodynamic environments, mechanical properties of the mantle govern the tectonic behaviour of the lithosphere. Lateral rheological heterogeneity of the continental lithosphere may result from various sources, with variations in geothermal gradient being the principal one. The oldest domains of continents, the cratonic nuclei, are characterized by a relatively cold, thick, and consequently stiff lithosphere. On the other hand, rifting may also modify the thermal structure of the lithosphere. Depending on the relative stretching of the crust and upper mantle, a stiff or a weak heterogeneity may develop. Observations from rift domains suggest that rifting usually results in a larger thinning of the lithospheric mantle than of the crust, and therefore tends to generate a weak heterogeneity. Numerical models show that during continental collision, the presence of both stiff and weak rheological heterogeneities significantly influences the large-scale deformation of the continental lithosphere. They especially favour the development of lithospheric-scale strike-slip faults, which allow strain to be transferred between the heterogeneities. An heterogeneous strain partition occurs: cratons largely escape deformation, and strain tends to localize within or at the boundary of the rift basins provided compressional deformation starts before the thermal heterogeneity induced by rifting are compensated. Seismic and electrical conductivity anisotropies consistently point towards the existence of a coherent fabric in the lithospheric mantle beneath continental domains. Analysis of naturally deformed peridotites, experimental deformations and numerical simulations suggest that this fabric is developed during orogenic events and subsequently frozen in the lithospheric mantle. Because the mechanical properties of single-crystal olivine are anisotropic, i.e. dependent on the orientation of the applied forces relative to the dominant slip systems, a pervasive fabric frozen in the mantle may induce a significant mechanical anisotropy of the whole lithospheric mantle. It is suggested that this mechanical anisotropy is the source of the so-called tectonic inheritance, i.e. the systematic reactivation of ancient tectonic directions; it may especially explain preferential rift propagation and continental break-up along pre-existing orogenic belts. Thus, the deformation of continents during orogenic events results from a trade-off between tectonic forces applied at plate boundaries, plate geometry, and the intrinsic properties (rheological heterogeneity and mechanical anisotropy) of the continental plates

Shear wave splitting in SE Brazil: an effect of active or fossil upper mantle flow, or both?

International audienceWe investigated the structure of the upper mantle beneath southeastern Brazil using teleseismic shear wave splitting measurements. Measurements were performed on seismic data recorded in the Ribeira and Brasilia Neoproterozoic belts, which wrap around the southern termination of the São Francisco craton and disappear westward under the Paraná basin. In the northern Ribeira belt, dominated by thrust tectonics, the fast shear wave polarization planes trend on average N080°E, whereas in the central domain, dominated by strike-slip tectonics, fast shear waves are polarized parallel to the structural trend (N065°E). Stations located above the main transcurrent fault display large delay times (> 2.5 s). Such values, among the largest in the world, require either an unusually large intrinsic anisotropy frozen within the lithosphere, or a contribution from both the lithospheric and asthenospheric mantle. Within the southern Brasilia belt, fast split shear waves are polarized parallel to the structural trend of the belt, at a high angle from the APM. Although part of our data set strongly favors an origin of anisotropy related to a fabric frozen in the lithospheric mantle since the Neoproterozoic, a contribution of the asthenospheric flow related to the present day plate motion is also required to explain the observed splitting parameters

EBSD-measured lattice-preferred orientations and seismic properties of eclogites

International audienceWe investigated the deformation mechanisms and the seismic properties of 10 eclogite samples from different localities (Alps, Norway, Mali and eastern China) through the analysis of their microstructures and lattice-preferred orientations (LPO). These samples are representative of various types and intensity of deformation under eclogitic metamorphic conditions. Omphacite and garnet LPO were determined from electron backscatter diffraction (EBSD) technique. Garnet appears to be almost randomly oriented whereas omphacite develops strong LPO, characterized by the [001]-axes concentrated sub-parallel to the lineation, and the (010)-poles concentrated sub-perpendicular to the foliation. In order to analyze the deformation mechanisms that produced such omphacite LPO, we compare our observations to LPO simulated by viscoplastic self-consistent numerical models. A good fit to the measured LPO is obtained for models in which the dominant slip systems are 1/2h110i{11 ¯ 0}, [001] {110} and [001] (100). Dominant activation of these slip systems is in agreement with TEM studies of naturally deformed omphacite. Seismic properties of eclogite are calculated by combining the measured LPO and the single crystal elastic constants of omphacite and garnet. Although eclogite seismic anisotropies are very weak (less than 3% for both P-and S-wave), they are generally characterized by a maximum P-wave velocity sub-parallel to the lineation and by a minimum velocity approximately normal to foliation. The mean P-and S-wave velocities are high (respectively, 8.6 and 4.9 km/s). The S-wave anisotropy pattern displays complex relationships with the structural frame but the fast polarization plane generally tends to be parallel to the foliation. Calculated reflection coefficients show that an eclogite/crust interface is generally a good reflector (Rc > 0.1), whereas an eclogite body embedded in the upper mantle would be hardly detectable

Comment on “SKS splitting beneath continental rifts zones” by Gao et al.

International audienceAs previously suggested by many authors, shear wave splitting rneasurernents certainly provide the best insights on the tectonic structure (or fabric) of the upper mantle. Shear wave splitting pararneters are correlated with the flow fabric developed in the deforming upper mantle. Petrophysical analysis of peridotites [e.g., Kem et al., 1996; Mainprice and Silver, 1993] shows that the largest anisotropy is recorded for shear waves propagating close to the Y structural direction (i.e., normal to the lineation in the foliation plane) and that the fast split shear wa ve is polarized in a plane parallel to the X structural axis (i.e., the lineation, marked by the olivine a axis concentration). Mapping shear wave splitting parameters over a specific tectonic domain would therefore provide an image of the mantle fabric at depth

Evolução Cinemática das Porções Internas do Cinturão Dom Feliciano, Região de Piratini, RS

Dois episódios cinemáticos afetando rochas da associação de arco magmático precoce (AAM I) do Cinturão Dom Feliciano foram reconhecidos na área de Piratini: um fluxo tectônico mais antigo de orientação NW-SE seguido por um fluxo de orientação NE-SW. O fluxo tectônico precoce transversal ao alongamento do cinturão é registrado por zonas de cisalhamento sub-horizontais e subverticais. O fluxo tangencial é caracterizado por deformação de alta temperatura no estado sólido afetando gnaisses dioríticos da associação de arco magmático precoce. Estruturas de escala microscópica dessa deformação foram em grande parte obliteradas por migmatização e/ou injeções graníticas sin- a tardi-tectônicas. Os padrões de fluxo, tanto o de deformação no estado sólido quanto o magmático, sugerem movimento do bloco superior para NW. A zona de cisalhamento transcorrente NW-SE é caracterizada por uma movimentação levogira sob condições metamórficas da fácies anfibolito afetando gnaisses granodioríticos da AAM I. A trama resultante foi parcialmente rearranjada por crescimento estático da maioria dos minerais que foram subsequentemente recristalizados durante reativação dessas zonas de cisalhamento sob condições decrescentes de temperatura. A deformação tardia é caracterizada por fluxo paralelo ao orógeno (NE-SW) em (i) uma zona de cisalhamento transcorrente de escala regional associado com um expressivo magmatismo sincinemático, e (ii) ao longo de diversas zonas de cisalhamento discretas e subordinadas, retrabalhando as rochas ígneas pré-existente. Indicadores cinemáticos consistentes, nas zonas de cisalhamento discretas de pequena escala, sugerem sentido de cisalhamento dextrogiro. Essa deformação desenvolvida sob condições metamórficas retrogressivas da fácies anfibolito superior a xisto verde inferior foi provavelmente controlada pelo resfriamento dos granitoides sincinemáticos

Basement – Cover decoupling and progressive exhumation of metamorphic sediments at hot rifted margin. Insights from the Northeastern Pyrenean analog

International audienceWe compile field data collected along the eastern part of the North Pyrenean Zone (NPZ) to point to a tectonic evolution under peculiar thermal conditions applying to the basin sediments in relation with the opening of the Cretaceous Pyrenean rift. Based on this compilation, we show that when thinning of the continental crust increased , isotherms moved closer to the surface with the result that the brittle-ductile transition propagated upward and reached sediments deposited at the early stage of the basin opening. During the continental breakup, the pre-rift Mesozoic cover was efficiently decoupled from the Paleozoic basement along the Triassic evaporite level and underwent drastic ductile thinning and boudinage. We suggest that the upper Albian and upper Creta-ceous flysches acted as a blanket allowing temperature increase in the mobile pre-rift cover. Finally, we show that continuous spreading of the basin floor triggered the exhumation of the metamorphic, ductily sheared pre-rift cover, thus contributing to the progressive thinning of the sedimentary pile. In a second step, we investigate the detailed geological records of such a hot regime evolution along a reference-section of the eastern NPZ. We propose a balanced restoration from the Mouthoumet basement massif (north) to the Boucheville Albian basin (south). This section shows a north to south increase in the HT Pyrenean imprint from almost no metamorphic recrystallization to more than 600 °C in the pre-and syn-rift sediments. From this reconstruction, we propose a scenario of tectonic thinning involving the exhumation of the pre-rift cover by the activation of various detachment surfaces at different levels in the sedimentary pile. In a third step, examination of the architecture of current distal passive margin domains provides confident comparison between the Pyrenean case and modern analogs. Finally, we propose a general evolutionary model for the pre-rift sequence of the Northeastern Pyrenean rifted margin

Continental rifting parallel to ancient collisional belts: an effect of the mechanical anisotropy of the lithospheric mantle

International audienceAnalysis of major rift systems suggests that the preexisting structure of the lithosphere is a key parameter in the rifting process. Rift propagation is not random, but tends to follow the trend of the orogenic fabric of the plates, systematically reactivating ancient lithospheric structures. Continental rifts often display a clear component of strikeŝ lip deformation, in particular in the early rifting stage. Moreover, although the close temporal and spatial association between flood basalt eruption and continental breakup suggests that mantle plumes play an important role in the rifting process, there is a paradox between the pinpoint thermal and stress perturbation generated by an upwelling mantle plume and the planar geometry of rifts. These observations suggest that the deformation of the lithosphere, especially during rifting, is controlled by its preexisting structure. On the other hand, (1) the plasticity anisotropy of olivine single crystal and aggregates, (2) the strong crystallographic orientation of olivine observed in mantle xenoliths and lherzolite massifs, and (3) seismic anisotropy data, which require a tectonic fabric in the upper mantle coherent over large areas, suggest that preservation within the lithospheric mantle of a lattice preferred orientation (LPO) of olivine crystals may induce a large-scale mechanical anisotropy of the lithospheric mantle. We use a polycrystal plasticity model to investigate the effect of a preexisting mantle fabric on the continental breakup process. We assess the deformation of an anisotropic continental lithosphere in response to an axi-symmetric tensional stress field produced by an upwelling mantle plume by calculating the deformation of textured olivine polycrystals representative of the lithospheric mantle at different positions above a plume head. Model results show that a LPO-induced mechanical anisotropy of the lithospheric mantle may result in directional softening, leading to heterogeneous deformation. During continental rifting, this mechanical anisotropy may induce strain localisation in domains where extensional stress is oblique (30-55³) to the preexisting mantle fabric. This directional softening associated with olivine LPO frozen in the lithospheric mantle may also guide the propagation of the initial instability, that will follow the preexisting structural trend. The preexisting mantle fabric also controls the deformation regime, imposing a strong strike^slip shear component. A LPOinduced mechanical anisotropy may therefore explain the systematic reactivation of ancient collisional belts during rifting (structural inheritance), the plume^rift paradox, and the onset of transtension within continental rifts