STUDY ON MULTI-OBJECTIVE OPTIMIZATION OF THE TURNING PROCESS OF EN 10503 STEEL BY COMBINATION OF TAGUCHI METHOD AND MOORA TECHNIQUE

In this study, the multi-objective optimization problem of turning process was successfully solved by a Taguchi combination method and MOORA techniques. In external turning process of EN 10503 steel, surface grinding process, the orthogonal Taguchi L9 matrix was selected to design the experimental matrix with four input parameters namely insert nose radius, cutting velocity, feed rate, and depth of cut. The parameters that were chosen as the evaluation criteria of the machining process were the surface roughness (Ra), the cutting force amplitudes in X, Y, Z directions, and the material removal rate (MRR). Using Taguchi method and MOORA technique, the optimized results of the cutting parameters were determined to obtain the minimum values of surface roughness and cutting force amplitudes in X, Y, Z directions, and maximum value of MRR. These optimal values of insert nose radius, cutting velocity, feed rate, and cutting depth were 1.2 mm, 76.82 m/min, 0.194 mm/rev, and 0.15 mm, respectively. Corresponding to these optimal values of the input parameters, the surface roughness, cutting force amplitudes in X, Y, Z directions, and material removal rate were 0.675 µm, 124.969 N, 40.545 N, 164.206 N, and 38.130 mm3/s, respectively. The proposed method in this study can be applied to improve the quality and effectiveness of turning processes by improving the surface quality, reducing the cutting force amplitudes, and increasing the material removal rate. Finally, the research direction was also proposed in this stud

Solving Partial Differential Equation Using FPGA Technology

This chapter introduces the method of using CNN technology on FPGA chips to solve differential equation with large space, with lager computing space, while limitation of resource chip on FPGA is needed, we have to find solution to separate differential space into several subspaces. Our solution will do: firstly, division of the computing space into smaller areas and combination of sequential and parallel computing; secondly, division and combination of boundary areas that are required to be continuous to avoid losing temporary data while processing (using buffer memory to store); and thirdly, real-time data exchange. The control unit controls the activities of the whole system set by the algorithm. We have configured the CNN chip for solving Navier-Stokes equation for the hydraulic fluid flow successfully on the Virtex 6 chip XCVL240T-1FFG1156 by Xilinx and giving acceptance results as well

Thermal buckling of imperfect functionally graded cylindrical shells according to Wan-Donnell model

A thermal buckling analysis of imperfect circular cylindrical shells of functionally graded material is considered. The material properties are assumed varying as a power form of thickness coordinate variable. The Donnell equilibrium and stability equations are considered and the Wan-Donnell model for initial geometrical imperfection is adopted. The thermal loads include the uniform temperature rise and nonlinear temperature change across the thickness of shell. A closed form solution for the thermal buckling of simply supported cylindrical FG shell under the described thermal loads is obtained. The influences of the relative thickness, the imperfection size and the power law index on buckling thermal loads are all discussed

POSSIBILITY OF LOW ALTITUDES MEASUREMENT ABOVE SEA SURFACE UNDER CONDITIONS OF HAZE AND FOG

Subject of Research. This paper presents analysis of the possibility for establishing all-weather pulse laser altimeters for measuring of low altitudes above the sea surface. We proposed special design features which take into account the random nature of the reflective properties and low reflection coefficient of the water surface. Method. Theoretical analysis and numerical simulation of temporal characteristics of backscattering return and average power reflected from the sea surface were carried out. The method of altitude measuring to the sea surface in conditions of fog and haze is based on the time interval measuring between the emitted pulse drop and the backscattered signal drop when backscattered signal exceeds the certain level.Main Results. A block diagram of pulsed laser altimeter is proposed which makes it possible to measure low altitudes to the sea surface in various meteorological conditions. The ranges of measured altitudes are determined in the clean atmosphere and in the conditions of fog and haze.Practical Relevance. The proposed scheme ensures the navigation of low-flying vehicles above the sea surface under radio interference in all-weather condition

An alternative method for determining the coefficient of thermal expansion of composite material of spherical particles

Composite material is widely used in modern structures. Many researchers have been involved in studying, developing and applying this kind of material. The composite material of spherical particles is a material composed of continuous matrix phase and spherical particles. In modern technique, it is very necessary to consider the influence of temperature on toughness and stability of structures. Therefore, determining the coefficient of thermal expansion of composite as a function of the coefficients and volume fractions of matrix and particle phases is a practical requirement. In this paper. we would like to introduce an alternative derivation method in order to obtain the thermal expansion coefficient of two-phase composite of spherical particles. Our results are the same as Vanin's and other authors'

Challenges in Employing BASEL II at Military Commercial Joint Stock Bank

This paper is conducted for examining the framework for risk management in the Basel II accord, the Basel II risk management model at the Military Commercial Joint Stock Bank. Data were collected from annual reports for the period from 2015 to 2017 of the Military Commercial Joint Stock Bank. The results show that the implementation of risk management under Basel II at Military Bank still faces many difficulties in the pressure of capital increase, database system, human resource quality, and cost of implementation. The study suggests some solutions for Military Bank to implement successfully Basel II, emphasizing the role of human resource quality, modernizing the data system and the specific mechanism for raising capital. The results of this research is a reference for Vietnamese commercial banks in identifying, controlling and responding various risks in banking activities in the context of Vietnam in particular and in emerging countries in general. Keywords: Basel II, Risk management, Military Ban

A study of ion wind generator using parallel arranged electrode configuration for centrifugal flow mixer

Ion wind is recently applied in various research areas such as the biomedical engineering, microfluidic mixing and particle manipulation. In this work, a bipolar ion wind generator configured by parallel arranged electrodes is used for centrifugal mixing applications. With the proposed configuration, negative and positive ion winds are simultaneously generated, mixed and then neutralized by each other while travelling toward liquid surface. The efficiency of the device was investigated both computationally and experimentally. The mixing of liquid occurred in different ways when the system is activated by either direct or alternating currents. Furthermore, the mixing is dependent on the dimension of electrode tip

Preliminary assessments of debris flow hazard in relation to geological environment changes in mountainous regions, North Vietnam

Debris flow, widely viewed by geo-scientists as a special combination of landslide and flash flood, causes devastating damages to people and environment in northern mountainous regions of Vietnam. Field observations in the areas damaged by debris flows in northern Vietnam identified types of soils and rocks that were more likely to cause debris flows. Unlike flash floods, almost debris flows occurred at the end of the rainy season when soils and rocks were water-oversaturated thus mechanically weak; this is when pore water pressure decreases, lowering the strength from the soil. Landslides causing debris flows are commonly current slides. The tip of a landslide is often confined within a stream that has a permanent or seasonal flow. Debris flows mainly occur in proluvium, colluvial deposits or tectonic breccia zones. However, not a debris flow initiated in a tectonic breccia zone has been recorded in the northern mountainous regions of Vietnam. Colluvial deposits have been intensively investigated by many researchers worldwide. These deposits are commonly formed in neo-tectonic active zones, weak bed rocks, particularly old metamorphic rocks such as sericite shale, terrigenous and Cenozoic or late Mesozoic volcanic sedimentary rocks that are distributed at steep slopes and/or highly differentiated reliefs. These features appear to be a prerequisite for the exogenous processes, including rolling stones, falling rocks, landslides and surface erosions to occur. To study the mechanical and physical properties of colluvial deposits, the most practical approach is conducting experiments with large-sized samples or on-site experiments. However, this approach is expensive and not always favorable. Applying the rock mechanical theory, it is possible to examine C, j values if values of geological characteristics of rock blocks are known. Thus, the present study attempts clarify the cause-feedback relationship between the change of geological environment and geological hazard in general, and debris flows, in particular, providing a basic scientific insight for studying and predicting debris flows.ReferencesBauziene L., 2000. Colluvisols as a component of erosional and accumulative soil cover structures of east lithuania. European soil Bureau -  research report (7), 147-151.Hoek E., Marinos P., 2007. A brief history of the development of the Hoek-Brown failure criterion, Soils and Rocks, 2, 1-8.Irfan T.Y., Tang K.Y., 1992. Effect of the coarse fractions on the shear strength of colluvium. Geo report No 23, Geotechnical Engineering office, Civil Engineering Department Hong Kong.Lai K. W., 2011. Geotechnical properties of colluvial and alluvial deposits in Hong Kong. The 5th cross-strait Conf on Structural and geotechnical engineering (SGE-5), 735-744, Hong Kong China, 13-15 July 2011.Ngo Van Liem, Phan Trong Trinh, Hoang Quang Vinh, Nguyen Van Huong, Nguyen Cong Quan, Tran Van Phong, Nguyen Phuc Dat, 2016. Analyze the correlation between the geomorphic indices and recent tectonics of the Lo River fault zone in southwest of Tam Dao range, Vietnam J. Earth Sci., 38(1), 1-13.Richard E. Gray, 2008. Landslide problems on appalachian colluvial slopes. Geohazards in transportation in the appalachian region, Charleston, WV.Robert W. Fleming, Johnson M. Arvid, 1994. Landslide in Colluvium. U.S. Geological Survey Bulletin 2059-B.Tran Trong Hue (edit), 2004. Integrated assessment of geological disasters in Vietnam territory and prevention solutions (Phase II: The northern mountainous provinces), Report on Phase II of the Independent National project. Institute of Geology, Hanoi, 2003.Tran Van Tu (edit), 1999. Study of the scientific basis of formation and development of mountain floods (including flash floods), proposing the solution of warning,  mitigation, and reduction of natural disasters and damage.  Report of the project of the Vietnam Centre for Science and Technology, 1998 - 1999.Tran Van Tu, 2012. Scientific basis and method to set up the map of zonation area for sweeping flood, Journal of Sciences of the Earth, 34(3), 7-13

A circulatory ionic wind for inertial sensing application

A novel gyroscope using circulatory electro-hydrodynamics flow in a confined space is presented for the first time. The configuration of the new gyroscope includes three point-ring corona discharge actuators that generate ion flows in three separated sub-channels. The three ion flows then merge together when going through a nozzle of the main chamber entrance and create a jet flow. In the new configuration, the residual charge of ion wind flow is removed by a master-ring electrode located at one end of the main chamber. Under the effect of the angular speed of gyroscope, the jet flow is deflected and this deflection is sensed using hotwires. The results, which are consistently acquired by both the numerical simulation and experiment on our prototypes, demonstrate the repeatability and stability of the new approach. Since the ion wind can be generated by a minimum power, the present configuration-based device does not require any vibrating component. Thus, the device is robust, cost, and energy-effective