Reduced dimension modeling of leading edge turbulent interaction noise

A computational aeroacoustics approach is used to model the effects of real airfoil geometry on leading edge turbulent interaction noise for symmetric airfoils at zero angle of attack. For the first time, one-component (transverse), two-component (transverse and streamwise), and three-component (transverse, streamwise, and spanwise) synthesized turbulent disturbances are modeled instead of single frequency transverse gusts, which previous computational studies of leading edge noise have been confined to. The effects of the inclusion of streamwise and spanwise disturbances on the noise are assessed, and it is shown that accurate noise predictions for symmetric airfoils can be made by modeling only the transverse disturbances, which reduces the computational expense of simulations. Additionally, the two-component turbulent synthesis method is used to model the effects of airfoil thickness on the noise for thicknesses ranging from 2% to 12%. By using sufficient airfoil thicknesses to show trends, it is found that airfoil thickness will reduce the noise at high frequency, and that the sound power P will reduce linearly with increasing airfoil thickness

Novel causative mutations in patients with Nance-Horan syndrome and altered localization of the mutant NHS-A protein isoform

PURPOSE: Nance-Horan syndrome is typically characterized by severe bilateral congenital cataracts and dental abnormalities. Truncating mutations in the Nance-Horan syndrome (NHS) gene cause this X-linked genetic disorder. NHS encodes two isoforms, NHS-A and NHS-1A. The ocular lens expresses NHS-A, the epithelial and neuronal cell specific isoform. The NHS-A protein localizes in the lens epithelium at the cellular periphery. The data to date suggest a role for this isoform at cell-cell junctions in epithelial cells. This study aimed to identify the causative mutations in new patients diagnosed with Nance-Horan syndrome and to investigate the effect of mutations on subcellular localization of the NHS-A protein. METHODS: All coding exons of NHS were screened for mutations by polymerase chain reaction (PCR) and sequencing. PCR-based mutagenesis was performed to introduce three independent mutations in the NHS-A cDNA. Expression and localization of the mutant proteins was determined in mammalian epithelial cells. RESULTS: Truncating mutations were found in 6 out of 10 unrelated patients from four countries. Each of four patients carried a novel mutation (R248X, P264fs, K1198fs, and I1302fs), and each of the two other patients carried two previously reported mutations (R373X and R879X). No mutation was found in the gene in four patients. Two disease-causing mutations (R134fs and R901X) and an artificial mutation (T1357fs) resulted in premature truncation of the NHS-A protein. All three mutant proteins failed to localize to the cellular periphery in epithelial cells and instead were found in the cytoplasm. CONCLUSIONS: This study brings the total number of mutations identified in NHS to 18. The mislocalization of the mutant NHS-A protein, revealed by mutation analysis, is expected to adversely affect cell-cell junctions in epithelial cells such as the lens epithelium, which may explain cataractogenesis in Nance-Horan syndrome patients. Mutation analysis also shed light on the significance of NHS-A regions for its localization and, hence, its function at epithelial cell junctions.Shiwani Sharma, Kathryn P. Burdon, Alpana Dave, Robyn V. Jamieson, Yuval Yaron, Frank Billson, Lionel Van Maldergem, Birgit Lorenz, Jozef Gécz and Jamie E. Crai

A simple, low-cost conductive composite material for 3D printing of electronic sensors

3D printing technology can produce complex objects directly from computer aided digital designs. The technology has traditionally been used by large companies to produce fit and form concept prototypes (‘rapid prototyping’) before production. In recent years however there has been a move to adopt the technology as full-scale manufacturing solution. The advent of low-cost, desktop 3D printers such as the RepRap and Fab@Home has meant a wider user base are now able to have access to desktop manufacturing platforms enabling them to produce highly customised products for personal use and sale. This uptake in usage has been coupled with a demand for printing technology and materials able to print functional elements such as electronic sensors. Here we present formulation of a simple conductive thermoplastic composite we term ‘carbomorph’ and demonstrate how it can be used in an unmodified low-cost 3D printer to print electronic sensors able to sense mechanical flexing and capacitance changes. We show how this capability can be used to produce custom sensing devices and user interface devices along with printed objects with embedded sensing capability. This advance in low-cost 3D printing with offer a new paradigm in the 3D printing field with printed sensors and electronics embedded inside 3D printed objects in a single build process without requiring complex or expensive materials incorporating additives such as carbon nanotubes

AD51B in Familial Breast Cancer

Common variation on 14q24.1, close to RAD51B, has been associated with breast cancer: rs999737 and rs2588809 with the risk of female breast cancer and rs1314913 with the risk of male breast cancer. The aim of this study was to investigate the role of RAD51B variants in breast cancer predisposition, particularly in the context of familial breast cancer in Finland. We sequenced the coding region of RAD51B in 168 Finnish breast cancer patients from the Helsinki region for identification of possible recurrent founder mutations. In addition, we studied the known rs999737, rs2588809, and rs1314913 SNPs and RAD51B haplotypes in 44,791 breast cancer cases and 43,583 controls from 40 studies participating in the Breast Cancer Association Consortium (BCAC) that were genotyped on a custom chip (iCOGS). We identified one putatively pathogenic missense mutation c.541C>T among the Finnish cancer patients and subsequently genotyped the mutation in additional breast cancer cases (n = 5259) and population controls (n = 3586) from Finland and Belarus. No significant association with breast cancer risk was seen in the meta-analysis of the Finnish datasets or in the large BCAC dataset. The association with previously identified risk variants rs999737, rs2588809, and rs1314913 was replicated among all breast cancer cases and also among familial cases in the BCAC dataset. The most significant association was observed for the haplotype carrying the risk-alleles of all the three SNPs both among all cases (odds ratio (OR): 1.15, 95% confidence interval (CI): 1.11–1.19, P = 8.88 x 10−16) and among familial cases (OR: 1.24, 95% CI: 1.16–1.32, P = 6.19 x 10−11), compared to the haplotype with the respective protective alleles. Our results suggest that loss-of-function mutations in RAD51B are rare, but common variation at the RAD51B region is significantly associated with familial breast cancer risk

What is Place? How Do We Think About Place?

This entry collects together various video clips from a workshop undertaken at the Half Moon Theatre in July 2012. The first clip shows excerpts from the final sharing of work at Half Moon. The diverse exercises carried out by the participants to explore fearful and everyday place are brought together and shared with an audience through the frame of a day in the life of the participants. From the eating of breakfast in the morning, through going to school and coming home, this framing allows the processes of the work to be shown in a coherent form to an external audience. Next is an audio clip. The ideas of place are introduced to the audience for the final performance of the work through a series of interviews conducted by researchers, which explore individuals’ perceptions of what place is and means to them. Responses to the work are also gathered through a twitter feed present in the foyer and post show questionnaires, allowing greater understanding of the impact of the work. The audio clip is a selection of audience responses to questions around place which can be activated by clicking the play button above. The next video documents a particular sharing of work, in addition to the performance in the theatre space, film and performers are placed in the foyer area of Half Moon, so that this place is also changed and re-performed. Film footage taken during sessions, but not used in the performance (see On Sites / 2. Scattering Cornflakes and 3. The Lost Boy), is projected in the foyer, so the audience can get a flavour of the work before seeing the performance itself. In addition the performers are positioned around the space prior to the show, in their ‘disrupted’ costumes which mix everyday items of school uniform and pyjamas. In the final performance of work at Half Moon, a range of digital content is utilised in conjunction with the performance of the participants in the space. This includes filmed material from the exercises described in the Half Moon: On Sites section. It also includes the live mixing of digitised sound by Patrick Furness, allowing the soundtrack to be responsive to the work of the participants. Questions about Digital Place had arisen during the workshops – e.g. to what extent did young people inhabit digital places? The use of the digital was highlighted throughout the process as part of this thinking about digital places. It was appropriate to reflect this in the final performance sharing

Deletion at 14q22-23 indicates a contiguous gene syndrome comprising anophthalmia, pituitary hypoplasia, and ear anomalies

Anophthalmia and pituitary gland hypoplasia are both debilitating conditions where the underlying genetic defect is unknown in the majority of cases. We identified a patient with bilateral anophthalmia and absence of the optic nerves, chiasm and tracts, as well as pituitary gland hypoplasia and ear anomalies with a de novo apparently balanced chromosomal translocation, 46,XY,t(3;14)(q28;q23.2). Translocation breakpoint analysis using FISH and high-resolution microarray comparative genomic hybridization (CGH) has identified a 9.66 Mb deleted region on the long arm of chromosome 14 which includes the genes BMP4, OTX2, RTN1, SIX6, SIX1, and SIX4. Three other patients with interstitial deletions involving 14q22-23 have been described, all with bilateral anophthalmia, pituitary abnormalities, ear anomalies, and a facial phenotype similar to our patient. OTX2 is involved in ocular developmental defects, and the severity of the ocular phenotype in our patient and the other 14q22-23 deletion patients, suggests this genomic region harbors other gene/s involved in ocular development. BMP4 haploinsufficiency is predicted to contribute to the ocular phenotype on the basis of its expression pattern and observed murine mutant phenotypes. In addition, deletion of BMP4 and SIX6 is likely to contribute to the abnormal pituitary development, and SIX1 deletion may contribute to the ear and other craniofacial features. This indicates that contiguous gene deletion may contribute to the phenotypic features in the 14q22-23 deletion patients.8 page(s