108 research outputs found
Solution-Processed Phototransistors Combining Organic Absorber and Charge Transporting Oxide for Visible to Infrared Light Detection.
This report demonstrates high-performance infrared phototransistors that use a broad-band absorbing organic bulk heterojunction (BHJ) layer responsive from the visible to the shortwave infrared, from 500 to 1400 nm. The device structure is based on a bilayer transistor channel that decouples charge photogeneration and transport, enabling independent optimization of each process. The organic BHJ layer is improved by incorporating camphor, a highly polarizable additive that increases carrier lifetime. An indium zinc oxide transport layer with high electron mobility is employed for rapid charge transport. As a result, the phototransistors achieve a dynamic range of 127 dB and reach a specific detectivity of 5 × 1012 Jones under a low power illumination of 20 nW/cm2, outperforming commercial germanium photodiodes in the spectral range below 1300 nm. The photodetector metrics are measured with respect to the applied voltage, incident light power, and temporal bandwidth, demonstrating operation at a video-frame rate of 50 Hz. In particular, the frequency and light dependence of the phototransistor characteristics are analyzed to understand the change in photoconductive gain under different working conditions
Broadband Infrared Photodetection Using a Narrow Bandgap Conjugated Polymer
Photodetection spanning the short-, mid-, and long-wave infrared (SWIR-LWIR) underpins modern science and technology. Devices using state-of-the-art narrow bandgap semiconductors require complex manufacturing, high costs, and cooling requirements that remain prohibitive for many applications. We report high-performance infrared photodetection from a donor-acceptor conjugated polymer with broadband SWIR-LWIR operation. Electronic correlations within the π-conjugated backbone promote a high-spin ground state, narrow bandgap, long-wavelength absorption, and intrinsic electrical conductivity. These previously unobserved attributes enabled the fabrication of a thin-film photoconductive detector from solution, which demonstrates specific detectivities greater than 2.10 × 109 Jones. These room temperature detectivities closely approach those of cooled epitaxial devices. This work provides a fundamentally new platform for broadly applicable, low-cost, ambient temperature infrared optoelectronics
Organic Bulk Heterojunction Infrared Photodiodes for Imaging Out to 1300 nm
This work studies
organic bulk heterojunction photodiodes with
a wide spectral range capable of imaging out to 1.3 μm in the
shortwave infrared. Adjustment of the donor-to-acceptor (polymer:fullerene)
ratio shows how blend composition affects the density of states (DOS)
which connects materials composition and optoelectronic properties
and provides insight into features relevant to understanding dispersive
transport and recombination in the narrow bandgap devices. Capacitance
spectroscopy and transient photocurrent measurements indicate the
main recombination mechanisms arise from deep traps and poor extraction
from accumulated space charges. The amount of space charge is reduced
with a decreasing acceptor concentration; however, this reduction
is offset by an increasing trap DOS. A device with 1:3 donor-to-acceptor
ratio shows the lowest density of deep traps and the highest external
quantum efficiency among the different blend compositions. The organic
photodiodes are used to demonstrate a single-pixel imaging system
that leverages compressive sensing algorithms to enable image reconstruction
Ultrafast High-Energy Micro-Supercapacitors Based On Open-Shell Polymer-Graphene Composites
Micro-supercapacitors are poised to serve as on-chip power sources for electronics. However, the challenge to simultaneously increase their power, energy, and lifetime demands new material combinations beyond current carbon-based systems. Here, we demonstrate that electro-deposition of an open-shell conjugated polymer with reduced graphene oxide achieves electrodes with capacitance up to 186 mF cm−2 (372 F cm−3). The extended delocalization within the open-shell polymer stabilizes redox states and facilitates a 3 V wide potential window, while the hierarchical electrode structure promotes ultrafast kinetics. The micro-supercapacitor shows a high power density of 227 mW cm−2 with an energy density of 10.5 μWh cm−2 and stability of 84% capacitance retention after 11,000 cycles. These attributes allow operation at 120 Hz for fast charging and alternating current (AC) line filtering applications, which may be suitable to replace bulky electrolytic capacitors or serve as high-endurance energy storage for wireless electronics
Current Status and Opportunities of Organic Thin-Film Transistor Technologies
Ajudes: National Key Research and Development Program of "Strategic Advanced Electronic Materials" under Grant 2016YFB0401100 and in part by the NSFC of China under Grant 61274083 and Grant 61334008.Attributed to its advantages of super mechanical flexibility, very low-temperature processing, and compatibility with low cost and high throughput manufacturing, organic thin-film transistor (OTFT) technology is able to bring electrical, mechanical, and industrial benefits to a wide range of new applications by activating nonflat surfaces with flexible displays, sensors, and other electronic functions. Despite both strong application demand and these significant technological advances, there is still a gap to be filled for OTFT technology to be widely commercially adopted. This paper providesa comprehensive reviewof the current status of OTFT technologies ranging from material, device, process, and integration, to design and system applications, and clarifies the real challenges behind to be addressed
A Platform to Study the Effects of Electrical Stimulation on Immune Cell Activation During Wound Healing.
Wound healing is a complex process involving diverse changes in multiple cell types where the application of electric fields has been shown to accelerate wound closure. To define the efficacy of therapies based on electric fields, it would be valuable to have a platform to systematically study the effects of electrical stimulation (ES) upon the inflammation phase and the activation of signaling mediators. Here, an in vivo ES model in which flexible electrodes are applied to an animal model for monitoring inflammation in a wound is reported on. Subcutaneous implants of polyvinyl alcohol sponges elicit inflammation response as defined by the infiltration of leukocytes. The wound site is subjected to electric fields using two types of additively fabricated flexible electrode arrays. The sponges are then harvested for flow cytometry analysis to identify changes in the phosphorylation state of intracellular targets. This platform enables studies of molecular mechanisms, as it shows that an application of low-frequency ES ≤0.5 Hz increases phosphorylation of Erk proteins in recruited leukocytes, identifying a signaling pathway that is activated during the healing process
The 2021 flexible and printed electronics roadmap
This roadmap includes the perspectives and visions of leading researchers in the key areas of flexible and printable electronics. The covered topics are broadly organized by the device technologies (sections 1–9), fabrication techniques (sections 10–12), and design and modeling approaches (sections 13 and 14) essential to the future development of new applications leveraging flexible electronics (FE). The interdisciplinary nature of this field involves everything from fundamental scientific discoveries to engineering challenges; from design and synthesis of new materials via novel device design to modelling and digital manufacturing of integrated systems. As such, this roadmap aims to serve as a resource on the current status and future challenges in the areas covered by the roadmap and to highlight the breadth and wide-ranging opportunities made available by FE technologies
Roadmap on printable electronic materials for next-generation sensors
The dissemination of sensors is key to realizing a sustainable, ‘intelligent’ world, where everyday objects and environments are equipped with sensing capabilities to advance the sustainability and quality of our lives—e.g., via smart homes, smart cities, smart healthcare, smart logistics, Industry 4.0, and precision agriculture. The realization of the full potential of these applications critically depends on the availability of easy-to-make, low-cost sensor technologies. Sensors based on printable electronic materials offer the ideal platform: they can be fabricated through simple methods (e.g., printing and coating) and are compatible with high-throughput roll-to-roll processing. Moreover, printable electronic materials often allow the fabrication of sensors on flexible/stretchable/biodegradable substrates, thereby enabling the deployment of sensors in unconventional settings. Fulfilling the promise of printable electronic materials for sensing will require materials and device innovations to enhance their ability to transduce external stimuli—light, ionizing radiation, pressure, strain, force, temperature, gas, vapours, humidity, and other chemical and biological analytes. This Roadmap brings together the viewpoints of experts in various printable sensing materials—and devices thereof—to provide insights into the status and outlook of the field. Alongside recent materials and device innovations, the roadmap discusses the key outstanding challenges pertaining to each printable sensing technology. Finally, the Roadmap points to promising directions to overcome these challenges and thus enable ubiquitous sensing for a sustainable, ‘intelligent’ world
Printed dose-recording tag based on organic complementary circuits and ferroelectric nonvolatile memories
- …