59 research outputs found
Pyroelectric response of lead zirconate titanate thin films on silicon: Effect of thermal stresses
Ferroelectric lead zirconate titanate [Pb(ZrxTi1-xO)(3), (PZT x:1-x)] has received considerable interest for applications related to uncooled infrared devices due to its large pyroelectric figures of merit near room temperature, and the fact that such devices are inherently ac coupled, allowing for simplified image post processing. For ferroelectric films made by industry-standard deposition techniques, stresses develop in the PZT layer upon cooling from the processing/growth temperature due to thermal mismatch between the film and the substrate. In this study, we use a non-linear thermodynamic model to investigate the pyroelectric properties of polycrystalline PZT thin films for five different compositions (PZT 40:60, PZT 30:70, PZT 20:80, PZT 10:90, PZT 0:100) on silicon as a function of processing temperature (25-800 degrees C). It is shown that the in-plane thermal stresses in PZT thin films alter the out-of-plane polarization and the ferroelectric phase transformation temperature, with profound effect on the pyroelectric properties. PZT 30:70 is found to have the largest pyroelectric coefficient (0.042 mu C cm(-2)degrees C-1, comparable to bulk values) at a growth temperature of 550 degrees C; typical to what is currently used for many deposition processes. Our results indicate that it is possible to optimize the pyroelectric response of PZT thin films by adjusting the Ti composition and the processing temperature, thereby, enabling the tailoring of material properties for optimization relative to a specific deposition process. (C) 2013 AIP Publishing LLC
High-resolution x-ray telescopes
High-energy astrophysics is a relatively young scientific field, made
possible by space-borne telescopes. During the half-century history of x-ray
astronomy, the sensitivity of focusing x-ray telescopes-through finer angular
resolution and increased effective area-has improved by a factor of a 100
million. This technological advance has enabled numerous exciting discoveries
and increasingly detailed study of the high-energy universe-including accreting
(stellar-mass and super-massive) black holes, accreting and isolated neutron
stars, pulsar-wind nebulae, shocked plasma in supernova remnants, and hot
thermal plasma in clusters of galaxies. As the largest structures in the
universe, galaxy clusters constitute a unique laboratory for measuring the
gravitational effects of dark matter and of dark energy. Here, we review the
history of high-resolution x-ray telescopes and highlight some of the
scientific results enabled by these telescopes. Next, we describe the planned
next-generation x-ray-astronomy facility-the International X-ray Observatory
(IXO). We conclude with an overview of a concept for the next next-generation
facility-Generation X. The scientific objectives of such a mission will require
very large areas (about 10000 m2) of highly-nested lightweight
grazing-incidence mirrors with exceptional (about 0.1-arcsecond) angular
resolution. Achieving this angular resolution with lightweight mirrors will
likely require on-orbit adjustment of alignment and figure.Comment: 19 pages, 11 figures, SPIE Conference 7803 "Adaptive X-ray Optics",
part of SPIE Optics+Photonics 2010, San Diego CA, 2010 August 2-
Si-compatible candidates for high-K dielectrics with the Pbnm perovskite structure
We analyze both experimentally (where possible) and theoretically from
first-principles the dielectric tensor components and crystal structure of five
classes of Pbnm perovskites. All of these materials are believed to be stable
on silicon and are therefore promising candidates for high-K dielectrics. We
also analyze the structure of these materials with various simple models,
decompose the lattice contribution to the dielectric tensor into force constant
matrix eigenmode contributions, explore a peculiar correlation between
structural and dielectric anisotropies in these compounds and give phonon
frequencies and infrared activities of those modes that are infrared-active. We
find that CaZrO_3, SrZrO_3, LaHoO_3, and LaYO_3 are among the most promising
candidates for high-K dielectrics among the compounds we considered.Comment: 17 pages, 9 figures, 4 tables. Supplementary information:
http://link.aps.org/supplemental/10.1103/PhysRevB.82.064101 or
http://www.physics.rutgers.edu/~sinisa/highk/supp.pd
Pathway to the PiezoElectronic Transduction Logic Device
The information age challenges computer technology to process an
exponentially increasing computational load on a limited energy budget - a
requirement that demands an exponential reduction in energy per operation. In
digital logic circuits, the switching energy of present FET devices is
intimately connected with the switching voltage, and can no longer be lowered
sufficiently, limiting the ability of current technology to address the
challenge. Quantum computing offers a leap forward in capability, but a clear
advantage requires algorithms presently developed for only a small set of
applications. Therefore, a new, general purpose, classical technology based on
a different paradigm is needed to meet the ever increasing demand for data
processing.Comment: in Nano Letters (2015
Development Roadmap for an Adjustable X-Ray Optics Observatory
We are developing adjustable X-ray optics to use on a mission such as SMART-X (see posters 38.02, 38.03 and Presentation 30.03). To satisfy the science problems expected to be posed by the next decadal survey, we anticipate requiring effective area greater than 1 square meter and Chandra-like angular resolution: approximately equal to 0.5 inches. To achieve such precise resolution we are developing adjustable mirror technology for X-ray astronomy application. This uses a thin film of piezoelectric material deposited on the back surface of the mirror to correct for figure distortions, including manufacturing errors and deflections due to gravity and thermal effects. We present here a plan to raise this technology from its current Level 2, to Level 6, by 2018
Optics Requirements For The Generation-X X-Ray Telescope
US, European, and Japanese space agencies each now operate successful X-ray missions -- NASA s Chandra, ESA s XMM-Newton, and JAXA s Suzaku observatories. Recently these agencies began a collaboration to develop the next major X-ray astrophysics facility -- the International X-ray Observatory (IXO) -- for launch around 2020. IXO will provide an order-of-magnitude increase in effective area, while maintaining good (but not sub-arcsecond) angular resolution. X-ray astronomy beyond IXO will require optics with even larger aperture areas and much better angular resolution. We are currently conducting a NASA strategic mission concept study to identify technology issues and to formulate a technology roadmap for a mission -- Generation-X (Gen-X) -- to provide these capabilities. Achieving large X-ray collecting areas in a space observatory requires extremely lightweight mirrors
Carbon isotope discrimination of arctic and boreal biomes inferred from remote atmospheric measurements and a biosphere-atmosphere model
Estimating discrimination against ^(13)C during photosynthesis at landscape, regional, and biome scales is difficult because of large-scale variability in plant stress, vegetation composition, and photosynthetic pathway. Here we present estimates of ^(13)C discrimination for northern biomes based on a biosphere-atmosphere model and on National Oceanic and Atmospheric Administration Climate Monitoring and Diagnostics Laboratory and Institute of Arctic and Alpine Research remote flask measurements. With our inversion approach, we solved for three ecophysiological parameters of the northern biosphere (^(13)C discrimination, a net primary production light use efficiency, and a temperature sensitivity of heterotrophic respiration (a Q10 factor)) that provided a best fit between modeled and observed δ^(13)C and CO_2. In our analysis we attempted to explicitly correct for fossil fuel emissions, remote C4 ecosystem fluxes, ocean exchange, and isotopic disequilibria of terrestrial heterotrophic respiration caused by the Suess effect. We obtained a photosynthetic discrimination for arctic and boreal biomes between 19.0 and 19.6‰. Our inversion analysis suggests that Q10 and light use efficiency values that minimize the cost function covary. The optimal light use efficiency was 0.47 gC MJ^(−1) photosynthetically active radiation, and the optimal Q10 value was 1.52. Fossil fuel and ocean exchange contributed proportionally more to month-to-month changes in the atmospheric growth rate of δ^(13)C and CO_2 during winter months, suggesting that remote atmospheric observations during the summer may yield more precise estimates of the isotopic composition of the biosphere
Fire emissions from C-3 and C-4 vegetation and their influence on interannual variability of atmospheric CO2 and delta (CO2) - C- 13
Measurements of atmospheric trace gases provide evidence that fire emissions increased during the 1997/1998 El Niño event and these emissions contributed substantially to global C
MEMS Technologies for Energy Harvesting
The objective of this chapter is to introduce the technology of Microelectromechanical Systems, MEMS, and their application to emerging energy harvesting devices. The chapter begins with a general introduction to the most common MEMS fabrication processes. This is followed with a survey of design mechanisms implemented in MEMS energy harvesters to provide nonlinear mechanical actuations. Mechanisms to produce bistable potential will be studied, such as introducing fixed magnets, buckling of beams or using slightly slanted clamped-clamped beams. Other nonlinear mechanisms are studied such as impact energy transfer, or the design of nonlinear springs. Finally, due to their importance in the field of MEMS and their application to energy harvesters, an introduction to actuation using piezoelectric materials is given. Examples of energy harvesters found in the literature using this actuation principle are also presented
- …