536 research outputs found
Bridging the Class Divide: The Development and Validation of Cultural Capital Diversification
Metallic Xenon, Molecular Condensates, and Superconductivity
A possibility of explaining the light absorption observed to occur under
pressure-induced xenon metallization as due to the transition to the
superconducting state is analyzed. The mechanism of the van der Waals bonding
is discussed.Comment: LaTeX 2.09 (RevTeX), 4 pages, 4 PostScript figures included in tex
Effect of acute copper sulfate exposure on olfactory responses to amino acids and pheromones in goldfish (Carassius auratus)
Exposure of olfactory epithelium to environmentally relevant concentrations of copper disrupts olfaction in fish. To examine
the dynamics of recovery at both functional and morphological levels after acute copper exposure, unilateral exposure of goldfish olfactory epithelia to 100 μM CuSO4 (10 min) was followed by electro-olfactogram (EOG) recording and scanning electron microscopy. Sensitivity to amino acids (L-arginine
and L-serine), generally considered food-related odorants, recovered most rapidly (three days), followed by that to
catecholamines(3-O-methoxytyramine),bileacids(taurolithocholic acid) and the steroid pheromone, 17,20 -dihydroxy-4-pregnen-
3-one 20-sulfate, which took 28 days to reach full recovery. Sensitivity to the postovulatory pheromone prostaglandin F2R had
not fully recovered even at 28 days. These changes in sensitivity were correlated with changes in the recovery of ciliated and microvillous receptor cell types. Microvillous cells appeared largely unaffected by CuSO4 treatment. Cilia in
ciliated receptor neurones, however, appeared damaged one day post-treatment and were virtually absent after three days but
had begun to recover after 14 days. Together, these results support the hypothesis that microvillous receptor neurones detect amino acids whereas ciliated receptor neurones were not functional and are responsible for detection of social stimuli (bile acidsandpheromones).Furthermore, differences in sensitivity to copper may be due to different transduction pathways in
the different cell types
Numerical Investigation of Boundary Conditions for Moving Contact Line Problems
When boundary conditions arising from the usual hydrodynamic assumptions are applied, analyses of dynamic wetting processes lead to a well-known nonintegrable stress singularity at the dynamic contact line, necessitating new ways to model this problem. In this paper, numerical simulations for a set of representative problems are used to explore the possibility of providing material boundary conditions for predictive models of inertialess moving contact line processes. The calculations reveal that up to Capillary number Ca=0.15, the velocity along an arc of radius 10Li (Li is an inner, microscopic length scale! from the dynamic contact line is independent of the macroscopic length scale a for a.103Li , and compares well to the leading order analytical ‘‘modulated-wedge’’ flow field [R. G. Cox, J. Fluid Mech. 168, 169 (1986)] for Capillary number Ca,0.1. Systematic deviations between the numerical and analytical velocity field occur for 0.1168, 169 (1986)] is used as a boundary condition along an arc of radius R=10-2a from the dynamic contact line, agree well with those using two inner slip models for Ca\u3c0.1, with a breakdown at higher Ca. Computations in a cylindrical geometry reveal the role of azimuthal curvature effects on velocity profiles in this vicinity of dynamic contact lines. These calculations show that over an appropriate range of Ca, the velocity field and the meniscus slope in a geometry-independent region can potentially serve as material boundary conditions for models of processes containing dynamic contact lines
Nominal 30-m Cropland Extent Map of Continental Africa by Integrating Pixel-Based and Object-Based Algorithms Using Sentinel-2 and Landsat-8 Data on Google Earth Engine
A satellite-derived cropland extent map at high spatial resolution (30-m or better) is a must for food and water security analysis. Precise and accurate global cropland extent maps, indicating cropland and non-cropland areas, are starting points to develop higher-level products such as crop watering methods (irrigated or rainfed), cropping intensities (e.g., single, double, or continuous cropping), crop types, cropland fallows, as well as for assessment of cropland productivity (productivity per unit of land), and crop water productivity (productivity per unit of water). Uncertainties associated with the cropland extent map have cascading effects on all higher-level cropland products. However, precise and accurate cropland extent maps at high spatial resolution over large areas (e.g., continents or the globe) are challenging to produce due to the small-holder dominant agricultural systems like those found in most of Africa and Asia. Cloud-based geospatial computing platforms and multi-date, multi-sensor satellite image inventories on Google Earth Engine offer opportunities for mapping croplands with precision and accuracy over large areas that satisfy the requirements of broad range of applications. Such maps are expected to provide highly significant improvements compared to existing products, which tend to be coarser in resolution, and often fail to capture fragmented small-holder farms especially in regions with high dynamic change within and across years. To overcome these limitations, in this research we present an approach for cropland extent mapping at high spatial resolution (30-m or better) using the 10-day, 10 to 20-m, Sentinel-2 data in combination with 16-day, 30-m, Landsat-8 data on Google Earth Engine (GEE). First, nominal 30-m resolution satellite imagery composites were created from 36,924 scenes of Sentinel-2 and Landsat-8 images for the entire African continent in 2015–2016. These composites were generated using a median-mosaic of five bands (blue, green, red, near-infrared, NDVI) during each of the two periods (period 1: January–June 2016 and period 2: July–December 2015) plus a 30-m slope layer derived from the Shuttle Radar Topographic Mission (SRTM) elevation dataset. Second, we selected Cropland/Non-cropland training samples (sample size = 9791) from various sources in GEE to create pixel-based classifications. As supervised classification algorithm, Random Forest (RF) was used as the primary classifier because of its efficiency, and when over-fitting issues of RF happened due to the noise of input training data, Support Vector Machine (SVM) was applied to compensate for such defects in specific areas. Third, the Recursive Hierarchical Segmentation (RHSeg) algorithm was employed to generate an object-oriented segmentation layer based on spectral and spatial properties from the same input data. This layer was merged with the pixel-based classification to improve segmentation accuracy. Accuracies of the merged 30-m crop extent product were computed using an error matrix approach in which 1754 independent validation samples were used. In addition, a comparison was performed with other available cropland maps as well as with LULC maps to show spatial similarity. Finally, the cropland area results derived from the map were compared with UN FAO statistics. The independent accuracy assessment showed a weighted overall accuracy of 94%, with a producer’s accuracy of 85.9% (or omission error of 14.1%), and user’s accuracy of 68.5% (commission error of 31.5%) for the cropland class. The total net cropland area (TNCA) of Africa was estimated as 313 Mha for the nominal year 2015. The online product, referred to as the Global Food Security-support Analysis Data @ 30-m for the African Continent, Cropland Extent product (GFSAD30AFCE) is distributed through the NASA’s Land Processes Distributed Active Archive Center (LP DAAC) as (available for download by 10 November 2017 or earlier): https://doi.org/10.5067/MEaSUREs/GFSAD/GFSAD30AFCE.001 and can be viewed at https://croplands.org/app/map. Causes of uncertainty and limitations within the crop extent product are discussed in detail
QSO Absorption Systems Detected in Ne VIII: High-Metallicity Clouds with a Large Effective Cross Section
Using high resolution, high signal-to-noise ultraviolet spectra of the z =
0.9754 quasar PG1148+549 obtained with the Cosmic Origins Spectrograph (COS) on
the Hubble Space Telescope, we study the physical conditions and abundances of
NeVIII+OVI absorption line systems at z(abs) =0.68381, 0.70152, 0.72478. In
addition to NeVIII and OVI, absorption lines from multiple ionization stages of
oxygen (OII, OIII, OIV) are detected and are well-aligned with the more highly
ionized species. We show that these absorbers are multiphase systems including
hot gas (T ~ 10^{5.7} K) that produces NeVIII and OVI, and the gas metallicity
of the cool phase ranges from Z = 0.3 Z_{solar} to supersolar. The cool
(~10^{4} K) phases have densities n_{H} ~ 10^{-4} cm^{-3} and small sizes (<
4kpc); these cool clouds are likely to expand and dissipate, and the NeVIII may
be within a transition layer between the cool gas and a surrounding, much
hotter medium. The NeVIII redshift density, dN/dz = 7^{+7}_{-3}, requires a
large number of these clouds for every L > 0.1L* galaxy and a large effective
absorption cross section (>~ 100 kpc), and indeed, we find a star forming ~L*
galaxy at the redshift of the z(abs)=0.72478 system, at an impact parameter of
217 kpc. Multiphase absorbers like these NeVIII systems are likely to be an
important reservoir of baryons and metals in the circumgalactic media of
galaxies.Comment: Final published version (Astrophysical Journal
The life cycle impact for platinum group metals and lithium to 2070 via surplus cost potential
© 2017 The Author(s)Purpose: A surplus cost potential (SCP) indicator has been developed as a measure of resource scarcity in the life cycle impact assessment (LCIA) context. To date, quality SCP estimates for other minerals than fossils are either not yet available or suffer methodological and data limitations. This paper overcomes these limitations and demonstrate how SCP estimates for metals can be calculated without the utilisation of ore grade function and by collecting primary economic and geological data. Methods: Data were collected in line with the geographical distribution, mine type, deposit type and production volumes and total production costs in order to construct cost-cumulative availability curves for platinum group metals (PGMs) and lithium. These curves capture the total amount of known mineral resources that can be recovered profitably at various prices from different types of mineral deposits under current conditions (this is, current technology, prevailing labour and other input prices). They served as a basis for modelling the marginal cost increase, a necessary parameter for estimating the SCP indicator. Surplus costs were calculated for different scenario projections for future mineral production considering future market dynamics, recyclability rates, demand-side technological developments and economic growth and by applying declining social discount rate. Results and discussion: Surplus costs were calculated for three mineral production scenarios, ranging from (US$2014/kg) 6545–8354 for platinum, 3583–4573 for palladium, 8281–10,569 for rhodium, 513–655 for ruthenium, 3201–4086 for iridium and 1.70–5.80 for lithium. Compared with the current production costs, the results indicate that problematic price increases of lithium are unlikely if the latest technological trends in the automotive sector will continue up to 2070. Surplus costs for PGMs are approximately one-third of the current production costs in all scenarios; hence, a threat of their price increases by 2070 will largely depend on the discovery of new deposits and the ability of new technologies to push these costs down over time. This also applies to lithium if the increasing electrification of road transport will continue up to 2070. Conclusions: This study provides useful insight into the availability of PGMs and lithium up to 2070. It proves that if time and resources permit, reliable surplus cost estimates can be calculated, at least in the short-run, based on the construction of one’s own curves with the level of quality comparable to expert-driven consulting services. Modelling and incorporating unknown deposits and potential future mineral production costs into these curves is the subject of future work
Engineering HIV-Resistant Human CD4+ T Cells with CXCR4-Specific Zinc-Finger Nucleases
HIV-1 entry requires the cell surface expression of CD4 and either the CCR5 or CXCR4 coreceptors on host cells. Individuals homozygous for the ccr5Δ32 polymorphism do not express CCR5 and are protected from infection by CCR5-tropic (R5) virus strains. As an approach to inactivating CCR5, we introduced CCR5-specific zinc-finger nucleases into human CD4+ T cells prior to adoptive transfer, but the need to protect cells from virus strains that use CXCR4 (X4) in place of or in addition to CCR5 (R5X4) remains. Here we describe engineering a pair of zinc finger nucleases that, when introduced into human T cells, efficiently disrupt cxcr4 by cleavage and error-prone non-homologous DNA end-joining. The resulting cells proliferated normally and were resistant to infection by X4-tropic HIV-1 strains. CXCR4 could also be inactivated in ccr5Δ32 CD4+ T cells, and we show that such cells were resistant to all strains of HIV-1 tested. Loss of CXCR4 also provided protection from X4 HIV-1 in a humanized mouse model, though this protection was lost over time due to the emergence of R5-tropic viral mutants. These data suggest that CXCR4-specific ZFNs may prove useful in establishing resistance to CXCR4-tropic HIV for autologous transplant in HIV-infected individuals
Angiogenesis induced by tumor necrosis factor-agr; is mediated by α4 integrins
Tumor necrosis factor-α (TNF-α) and fibroblast growth factor-2 (FGF-2 or bFGF) are potent stimulators of angiogenesis. TNF-α, but not FGF-2, can induce the expression of vascular cell adhesion molecule-1 (VCAM-1) on the surface of endothelial cells. The soluble form of VCAM-1 has recently been demonstrated to function as an angiogenic mediator. Here we demonstrate that monoclonal antibodies directed against VCAM-1 or its α4 integrin counter-receptor inhibited TNF-α-induced endothelial cell migration in vitro. Angiogenesis induced in vivo in rat corneas by TNF-α was inhibited by a neutralizing antibody directed against the rat α4 integrin subunit. A peptide antagonist of the a4 integrins blocked TNF-α-induced endothelial cell migration in vitro and angiogenesis in rat corneas in vivo. No inhibition by the antibodies or peptide antagonist was observed either in vitro or in vivo when FGF-2 was used as the stimulus. The peptide antagonist did not inhibit TNF-a binding to its receptor nor did it block the function of αvβ3, an integrin previously implicated in TNF-a and FGF-2 mediated angiogenesis. These results demonstrate that angiogenic processes induced by TNF-α are mediated in part by agr;4 integrins possibly by a mechanism involving the induction of soluble VCAM-1.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/41761/1/10456_2004_Article_188219.pd
‘It’s Kinda Punishment’: Tandem Logics and Penultimate Power in the Penal Voluntary Sector for Canadian Youth
This paper draws on original empirical research in Ontario, Canada which analyses penal voluntary sector practice with youth in conflict with the law. I illustrate how youth penal voluntary sector practice (YPVS) operates alongside, or in tandem with the statutory criminal justice system. I argue that examining the PVS and the statutory criminal justice system simultaneously, or in tandem, provides fuller understandings of PVS inclusionary (and exclusionary) control practices (Tomczak and Thompson 2017). I introduce the concept of penultimate power, which demonstrates the ability of PVS workers to trigger criminal justice system response toward a young person in conflict with the law. My novel concepts of tandem logics and penultimate power are useful for understanding PVS practice, explaining how seemingly contradictory approaches across state and ‘community’ organizations not only co-exist, but depend upon the tandem relationship between the PVS and the statutory criminal justice system
- …