25 research outputs found
Temporal Variation of NO2 and O3 in Rome (Italy) from Pandora and In Situ Measurements
To assess the best measures for the improvement of air quality, it is crucial to investigate in situ and columnar pollution levels. In this study, ground-based measurements of nitrogen dioxide (NO2) and ozone (O-3) collected in Rome (Italy) between 2017 and 2022 are analyzed. Pandora sun-spectrometers provided the time series of the NO2 vertical column density (VC-NO2), tropospheric column density (TC-NO2), near-surface concentration (SC-NO2), and the O-3 vertical column density (VC-O-3). In situ concentrations of NO2 and O-3 are provided by an urban background air quality station. The results show a clear reduction of NO2 over the years, thanks to the recent ecological transition policies, with marked seasonal variability, observable both by columnar and in situ data. Otherwise, O-3 does not show inter-annual variations, although a clear seasonal cycle is detectable. The results suggest that the variation of in situ O-3 is mainly imputable to photochemical reactions while, in the VC-O-3, it is triggered by the predominant contribution of stratospheric O-3. The outcomes highlight the importance of co-located in situ and columnar measurements in urban environments to investigate physical and chemical processes driving air pollution and to design tailored climate change adaptation strategies
BOREAS – a new MAX-DOAS profile retrieval algorithm for aerosols and trace gases
We present a new MAX-DOAS profiling algorithm for aerosols and trace gases,
BOREAS, which utilizes an iterative solution method including Tikhonov
regularization and the optimal estimation technique. The aerosol profile
retrieval is based on a novel approach in which the absorption depth of
O4 is directly used in order to retrieve extinction coefficient
profiles instead of the commonly used perturbation theory method. The
retrieval of trace gases is done with the frequently used optimal estimation
method but significant improvements are presented on how to deal with wrongly
weighted a priori constraints and for scenarios in which the a priori profile
is inaccurate.
Performance tests are separated into two parts. First, we address the general
sensitivity of the retrieval to the example of synthetic data calculated with
the radiative transfer model SCIATRAN. In the second part of the study, we
demonstrate BOREAS profiling accuracy by validating the results with the help of
ancillary measurements carried out during the CINDI-2 campaign in Cabauw, the
Netherlands, in 2016.
The synthetic sensitivity tests indicate that the regularization between
measurement and a priori constraints is insufficient when knowledge of the
true state of the atmosphere is poor. We demonstrate a priori pre-scaling and
extensive regularization tests as a tool for the optimization of retrieved
profiles. The comparison of retrieval results with in situ, ceilometer,
NO2 lidar, sonde and long-path DOAS measurements during the CINDI-2
campaign always shows high correlations with coefficients greater than 0.75.
The largest differences can be found in the morning hours, when the planetary
boundary layer is not yet fully developed and the concentration of trace
gases and aerosol, as a result of a low night-time boundary layer having
formed, is focused in a shallow, near-surface layer.</p
Intercomparison of NO2, O4, O3 and HCHO slant column measurements by MAX-DOAS and zenith-sky UV¿visible spectrometers during CINDI-2
40 pags., 22 figs., 13 tabs.In September 2016, 36 spectrometers from 24 institutes measured a number of key atmospheric pollutants for a period of 17¿d during the Second Cabauw Intercomparison campaign for Nitrogen Dioxide measuring Instruments (CINDI-2) that took place at Cabauw, the Netherlands (51.97¿¿N, 4.93¿¿E). We report on the outcome of the formal semi-blind intercomparison exercise, which was held under the umbrella of the Network for the Detection of Atmospheric Composition Change (NDACC) and the European Space Agency (ESA). The three major goals of CINDI-2 were (1) to characterise and better understand the differences between a large number of multi-axis differential optical absorption spectroscopy (MAX-DOAS) and zenith-sky DOAS instruments and analysis methods, (2) to define a robust methodology for performance assessment of all participating instruments, and (3) to contribute to a harmonisation of the measurement settings and retrieval methods. This, in turn, creates the capability to produce consistent high-quality ground-based data sets, which are an essential requirement to generate reliable long-term measurement time series suitable for trend analysis and satellite data validation.
The data products investigated during the semi-blind intercomparison are slant columns of nitrogen dioxide (NO2), the oxygen collision complex (O4) and ozone (O3) measured in the UV and visible wavelength region, formaldehyde (HCHO) in the UV spectral region, and NO2 in an additional (smaller) wavelength range in the visible region. The campaign design and implementation processes are discussed in detail including the measurement protocol, calibration procedures and slant column retrieval settings. Strong emphasis was put on the careful alignment and synchronisation of the measurement systems, resulting in a unique set of measurements made under highly comparable air mass conditions.
The CINDI-2 data sets were investigated using a regression analysis of the slant columns measured by each instrument and for each of the target data products. The slope and intercept of the regression analysis respectively quantify the mean systematic bias and offset of the individual data sets against the selected reference (which is obtained from the median of either all data sets or a subset), and the rms error provides an estimate of the measurement noise or dispersion. These three criteria are examined and for each of the parameters and each of the data products, performance thresholds are set and applied to all the measurements. The approach presented here has been developed based on heritage from previous intercomparison exercises. It introduces a quantitative assessment of the consistency between all the participating instruments for the MAX-DOAS and zenith-sky DOAS techniques.CINDI-2 received funding from the Netherlands Space Office (NSO). Funding for this study was provided
by ESA through the CINDI-2 (ESA contract no. 4000118533/16/ISbo) and FRM4DOAS (ESA contract no. 4000118181/16/I-EF)
projects and partly within the EU 7th Framework Programme
QA4ECV project (grant agreement no. 607405). The BOKU
MAX-DOAS instrument was funded and the participation of Stefan F. Schreier was supported by the Austrian Science Fund
(FWF): I 2296-N29. The participation of the University of Toronto
team was supported by the Canadian Space Agency (through
the AVATARS project) and the Natural Sciences and Engineering Research Council (through the PAHA project). The instrument was primarily funded by the Canada Foundation for Innovation and is usually operated at the Polar Environment Atmospheric Research Laboratory (PEARL) by the Canadian Network
for the Detection of Atmospheric Change (CANDAC). Funding for
CISC was provided by the UVAS (“Ultraviolet and Visible Atmospheric Sounder”) projects SEOSAT/INGENIO, ESP2015-71299-
R, MINECO-FEDER and UE. The activities of the IUP-Heidelberg
were supported by the DFG project RAPSODI (grant no. PL
193/17-1). SAOZ and Mini-SAOZ instruments are supported by the
Centre National de la Recherche Scientifique (CNRS) and the Centre National d’Etudes Spatiales (CNES). INTA recognises support
from the National funding projects HELADO (CTM2013-41311-P) and AVATAR (CGL2014-55230-R). AMOIAP recognises support from the Russian Science Foundation (grant no. 16-17-10275) and the Russian Foundation for Basic Research (grant nos. 16-05-
01062 and 18-35-00682). Ka L. Chan received transnational access funding from ACTRIS-2 (H2020 grant agreement no. 654109).
Rainer Volkamer recognises funding from NASA’s Atmospheric Composition Program (NASA-16-NUP2016-0001) and the US National Science Foundation (award AGS-1620530). Henning Finkenzeller is the recipient of a NASA graduate fellowship. Mihalis Vrekoussis recognises support from the University of Bremen and the DFG Research Center/Cluster of Excellence “The Ocean in the
Earth System-MARUM”. Financial support through the University of Bremen Institutional Strategy in the framework of the
DFG Excellence Initiative is gratefully appreciated for Anja Schönhardt. Pandora instrument deployment was supported by Luftblick
through the ESA Pandonia Project and NASA Pandora Project at the Goddard Space Flight Center under NASA Headquarters’ Tropospheric Composition Program. The article processing charges for
this open-access publication were covered by BK Scientific
Immunisation of migrants in EU/EEA countries: Policies and practices
In recent years various EU/EEA countries have experienced an influx of migrants from low and middle-income countries. In 2018, the “Vaccine European New Integrated Collaboration Effort (VENICE)” survey group conducted a survey among 30 EU/EEA countries to investigate immunisation policies and practices targeting irregular migrants, refugees and asylum seekers (later called “migrants” in this report). Twenty-nine countries participated in the survey. Twenty-eight countries reported having national policies targeting children/adolescent and adult migrants, however vaccinations offered to adult migrants are limited to specific conditions in seven countries. All the vaccinations included in the National Immunisation Programme (NIP) are offered to children/adolescents in 27/28 countries and to adults in 13/28 countries. In the 15 countries offering only certain vaccinations to adults, priority is given to diphtheria-tetanus, measles-mumps-rubella and polio vaccinations. Information about the vaccines given to child/adolescent migrants is recorded in 22 countries and to adult migrants in 19 countries with a large variation in recording methods found across countries. Individual and aggregated data are reportedly not shared with other centres/institutions in 13 and 15 countries, respectively. Twenty countries reported not collecting data on vaccination uptake among migrants; only three countries have these data at the national level. Procedures to guarantee migrants’ access to vaccinations at the community level are available in 13 countries. In conclusion, although diversified, strategies for migrant vaccination are in place in all countries except for one, and the strategies are generally in line with international recommendations. Efforts are needed to strengthen partnerships and implement initiatives across countries of origin, transit and destination to develop and better share documentation in order to guarantee a completion of vaccination series and to avoid unnecessary re-vaccination. Development of migrant-friendly strategies to facilitate migrants' access to vaccination and collection of vaccination uptake data among migrants is needed to meet existing gaps
Opfergrube der Hügelgräberkultur in der Gemarkung von Ménfőcsanak Spiralornament Auf Einem Tonfries Eines Gebäudes
Sky radiance at a coastline and effects of land and ocean reflectivities
We present a unique case study of the spectral sky radiance distribution
above a coastline. Results are shown from a measurement campaign in Italy
involving three diode array spectroradiometers which are compared to 3-D
model simulations from the Monte Carlo model MYSTIC. On the coast, the
surrounding is split into two regions, a diffusely reflecting land surface
and a water surface which features a highly anisotropic reflectance function.
The reflectivities and hence the resulting radiances are a nontrivial
function of solar zenith and azimuth angle and wavelength. We show that for
low solar zenith angles (SZAs) around noon, the higher land albedo causes the
sky radiance at 20° above the horizon to increase by 50 % in the
near infrared at 850 nm for viewing directions towards the land with respect
to the ocean. Comparing morning and afternoon radiances highlights the effect
of the ocean's sun glint at high SZA, which contributes around 10 % to the
measured radiance ratios. The model simulations generally agree with the
measurements to better than 10 %. We investigate the individual effects of
model input parameters representing land and ocean albedo and aerosols.
Different land and ocean bi-directional reflectance functions (BRDFs) do not generally improve the model agreement.
However, consideration of the uncertainties in the diurnal variation of
aerosol optical depth can explain the remaining discrepancies between
measurements and model. We further investigate the anisotropy effect of the
ocean BRDF which is featured in the zenith radiances. Again, the uncertainty
of the aerosol loading is dominant and obscures the modelled sun glint effect
of 7 % at 650 nm. Finally, we show that the effect on the zenith radiance
is restricted to a few kilometres from the coastline by model simulations
along a perpendicular transect and by comparing the radiances at the coast to
those measured at a site 15 km inland. Our findings are relevant to, for
example, ground-based remote sensing of aerosol characteristics, since a
common technique is based on sky radiance measurements along the solar
almucantar
Advanced NO2 retrieval technique for the Brewer spectrophotometer applied to the 20-year record in Rome, Italy
A re-evaluated data set of nitrogen dioxide (NO2) column densities over Rome for the years 1996 to 2017 is here presented. This long-term record is obtained from ground-based direct sun measurements with a MkIV Brewer spectrophotometer (serial number #067) and further reprocessed using a novel algorithm. Compared to the original Brewer algorithm, the new method includes updated NO2 absorption cross sections and Rayleigh scattering coefficients, and it accounts for additional atmospheric compounds and instrumental artefacts, such as the spectral transmittance of the filters, the alignment of the wavelength scale, and internal temperature. Moreover, long-term changes in the Brewer radiometric sensitivity are tracked using statistical methods for in-field calibration. The resulting series presents only a few (about 30) periods with missing data longer than 1 week and features NO2 retrievals for more than 6100ĝ€¯d, covering nearly 80ĝ€¯% of the considered 20-year period. The high quality of the data is demonstrated by two independent comparisons. In the first intensive campaign, Brewer #067 is compared against another Brewer (#066), recently calibrated at the Izaña Atmospheric Observatory through the Langley method and there compared to reference instrumentation from the Network for the Detection of Atmospheric Composition Change (NDACC). Data from this campaign show a highly significant Pearson's correlation coefficient of 0.90 between the two series of slant column densities (SCDs), slope 0.98 and offset 0.05ĝ€¯DU (Dobson units; 1.3×1015ĝ€¯molec.cm-2). The average bias between the vertical column densities is 0.03ĝ€¯DU (8.1×1014ĝ€¯molec.cm-2), well within the combined uncertainty of both instruments. Brewer #067 is also independently compared with new-generation instrumentation, a co-located Pandora spectrometer (#117), over a 1-year-long period (2016-2017) at Sapienza University of Rome, showing linear correlation indices above 0.96 between slant column densities, slope of 0.97, and offset of 0.02ĝ€¯DU (5.4×1014ĝ€¯molec.cm-2). The average bias between vertical column densities is negligible (-0.002ĝ€¯DU or -5.4×1013ĝ€¯molec.cm-2). This, incidentally, represents the first intercomparison of NO2 retrievals between a MkIV Brewer and a Pandora instrument. Owing to its accuracy and length, the Brewer data set collected in Rome can be useful for satellite calibration/validation exercises, comparison with photochemical models, and better aerosol optical depth estimates (NO2 optical depth climatology). In addition, it can be employed to identify long-term trends in NO2 column densities in a metropolitan environment, over two decades witnessing important changes in environmental policies, emission loads and composition, and the effect of a worldwide economic recession, to offer just a few examples. The method can be replicated on the more than 80 MkIV spectrophotometers operating worldwide in the frame of the international Brewer network. The NO2 data set described in this paper can be freely accessed at 10.5281/zenodo.4715219
On the effect of sea breeze regime on aerosols and gases properties in the urban area of Rome, Italy
Several ground-based remote sensing and in-situ instruments were used to investigate the development of the sea-breeze front and its effect on both the optical and physical aerosol properties, the Particulate Matter (PM) content and the tropospheric and near-surface NO2 concentrations. Most of the instruments belongs to the Boundary-layer Air Quality-analysis Using Network of Instruments (BAQUNIN) supersite, in the urban area of Rome (Italy). Two characteristic sea-breeze patterns were identified: the front days, in which the sea-breeze front develops in a few minutes, and the gentle breeze days, in which the onset of the front is gradual (more than 20 min). In the case of front days, Aerosol Optical Depth (AOD) increases during the onset of the breeze. The Ångström Exponent (AE), tropospheric and near surface NO2 amounts are almost constant during the day, while the aerosols volume size distribution follows a trimodal distribution. PM2.5 and PM10 concentrations decrease before the development of the sea-breeze front and then increase. Conversely, during gentle breeze days, AOD and AE do not change significantly. The tropospheric and near surface amount of NO2, PM2.5 and PM10 concentrations decrease, suggesting a significant dispersion of pollutants, while the aerosol size distribution shows a trimodal predominance
The Dawn of Geostationary Air Quality Monitoring: Case Studies From Seoul and Los Angeles
Intercomparison of NO₂, O₄, O₃ and HCHO slant column measurements by MAX-DOAS and zenith-sky UV--visible spectrometers during CINDI-2
In September 2016, 36 spectrometers from 24 institutes measured a number of key atmospheric pollutants for a period of 17 d during the Second Cabauw Intercomparison campaign for Nitrogen Dioxide measuring Instruments (CINDI-2) that took place at Cabauw, the Netherlands (51.97∘ N, 4.93∘ E). We report on the outcome of the formal semi-blind intercomparison exercise, which was held under the umbrella of the Network for the Detection of Atmospheric Composition Change (NDACC) and the European Space Agency (ESA). The three major goals of CINDI-2 were (1) to characterise and better understand the differences between a large number of multi-axis differential optical absorption spectroscopy (MAX-DOAS) and zenith-sky DOAS instruments and analysis methods, (2) to define a robust methodology for performance assessment of all participating instruments, and (3) to contribute to a harmonisation of the measurement settings and retrieval methods. This, in turn, creates the capability to produce consistent high-quality ground-based data sets, which are an essential requirement to generate reliable long-term measurement time series suitable for trend analysis and satellite data validation.
The data products investigated during the semi-blind intercomparison are slant columns of nitrogen dioxide (NO2), the oxygen collision complex (O4) and ozone (O3) measured in the UV and visible wavelength region, formaldehyde (HCHO) in the UV spectral region, and NO2 in an additional (smaller) wavelength range in the visible region. The campaign design and implementation processes are discussed in detail including the measurement protocol, calibration procedures and slant column retrieval settings. Strong emphasis was put on the careful alignment and synchronisation of the measurement systems, resulting in a unique set of measurements made under highly comparable air mass conditions.
The CINDI-2 data sets were investigated using a regression analysis of the slant columns measured by each instrument and for each of the target data products. The slope and intercept of the regression analysis respectively quantify the mean systematic bias and offset of the individual data sets against the selected reference (which is obtained from the median of either all data sets or a subset), and the rms error provides an estimate of the measurement noise or dispersion. These three criteria are examined and for each of the parameters and each of the data products, performance thresholds are set and applied to all the measurements. The approach presented here has been developed based on heritage from previous intercomparison exercises. It introduces a quantitative assessment of the consistency between all the participating instruments for the MAX-DOAS and zenith-sky DOAS techniques