Enhancing active vision system categorization capability through uniform local binary patterns

Previous research in Neuro-Evolution controlled Active Vision Systems has shown its potential to solve various shape categorization and discrimination problems. However, minimal investigation has been done in using this kind of evolved system in solving more complex vision problems. This is partly due to variability in lighting conditions, reflection, shadowing etc., which may be inherent to these kinds of problems. It could also be due to the fact that building an evolved system for these kinds of problems may be too computationally expensive. We present an Active Vision System controlled Neural Network trained by a Genetic Algorithm that can autonomously scan through an image pre-processed by Uniform Local Binary Patterns [8]. We demonstrate the ability of this system to categorize more complex images taken from the camera of a Humanoid (iCub) robot. Preliminary investigation results show that the proposed Uniform Local Binary Pattern [8] method performed better than the gray-scale averaging method of [1] in the categorization tasks. This approach provides a framework that could be used for further research in using this kind of system for more complex image problems

Miscalibrations in judgements of attractiveness with cosmetics

Women use cosmetics to enhance their attractiveness. How successful they are in doing so remains unknown - how do men and women respond to cosmetics use in terms of attractiveness? There are a variety of miscalibrations where attractiveness is concerned - often, what one sex thinks the opposite sex finds attractive is incorrect. Here, we investigated observer perceptions about attractiveness and cosmetics, as well as their understanding of what others would find attractive. We used computer graphic techniques to allow observers to vary the amount of cosmetics applied to a series of female faces. We asked observers to optimize attractiveness for themselves, for what they thought women in general would prefer, and what they thought men in general would prefer. We found that men and women agree on the amount of cosmetics they find attractive, but overestimate the preferences of women and, when considering the preferences of men, overestimate even more. We also find that models' self-applied cosmetics are far in excess of individual preferences. These findings suggest that attractiveness perceptions with cosmetics are a form of pluralistic ignorance, whereby women tailor their cosmetics use to an inaccurate perception of others' preferences. These findings also highlight further miscalibrations of attractiveness ideals

Face, body and speech cues independently predict judgments of attractiveness

Research on human attraction frequently makes use of single-modality stimuli such as neutral-expression facial photographs as proxy indicators of an individual’s attractiveness. However, we know little about how judgments of these single-modality stimuli correspond to judgments of stimuli that incorporate multi-modal cues of face, body and speech. In the present study, ratings of attractiveness judged from videos of participants introducing themselves were independently predicted by judgments of the participant’s facial attractiveness (a neutral-expression facial photograph masked to conceal the hairstyle), body attractiveness (a photograph of the upper body), and speech attractiveness (the soundtrack to the video). We also found that ratings of the face, body and speech were positively related to each other. Our results support the assumption that the single-modality stimuli used in much attractiveness research are valid proxy indicators of overall attractiveness in ecologically valid contexts, and complement literature showing cross-modality concordance of trait attractiveness, but also recommend that research relying on assessments of individual attractiveness take account of both visual and vocal attractiveness where possible

Facial Cosmetics and Attractiveness: Comparing the Effect Sizes of Professionally-Applied Cosmetics and Identity

Forms of body decoration exist in all human cultures. However, in Western societies, women are more likely to engage in appearance modification, especially through the use of facial cosmetics. How effective are cosmetics at altering attractiveness? Previous research has hinted that the effect is not large, especially when compared to the variation in attractiveness observed between individuals due to differences in identity. In order to build a fuller understanding of how cosmetics and identity affect attractiveness, here we examine how professionally-applied cosmetics alter attractiveness and compare this effect with the variation in attractiveness observed between individuals. In Study 1, 33 YouTube models were rated for attractiveness before and after the application of professionally-applied cosmetics. Cosmetics explained a larger proportion of the variation in attractiveness compared with previous studies, but this effect remained smaller than variation caused by differences in attractiveness between individuals. Study 2 replicated the results of the first study with a sample of 45 supermodels, with the aim of examining the effect of cosmetics in a sample of faces with low variation in attractiveness between individuals. While the effect size of cosmetics was generally large, between-person variability due to identity remained larger. Both studies also found interactions between cosmetics and identity-more attractive models received smaller increases when cosmetics were worn. Overall, we show that professionally- applied cosmetics produce a larger effect than self-applied cosmetics, an important theoretical consideration for the field. However, the effect of individual differences in facial appearance is ultimately more important in perceptions of attractiveness

InterFace : A software package for face image warping, averaging, and principal components analysis

We describe InterFace, a software package for research in face recognition. The package supports image warping, reshaping, averaging of multiple face images, and morphing between faces. It also supports principal components analysis (PCA) of face images, along with tools for exploring the “face space” produced by PCA. The package uses a simple graphical user interface, allowing users to perform these sophisticated image manipulations without any need for programming knowledge. The program is available for download in the form of an app, which requires that users also have access to the (freely available) MATLAB Runtime environment

Interaction of convective organisation with monsoon precipitation, atmosphere, surface and sea: the 2016 INCOMPASS field campaign in India

The INCOMPASS field campaign combines airborne and ground measurements of the 2016 Indian monsoon, towards the ultimate goal of better predicting monsoon rainfall. The monsoon supplies the majority of water in South Asia, but forecasting from days to the season ahead is limited by large, rapidly developing errors in model parametrizations. The lack of detailed observations prevents thorough understanding of the monsoon circulation and its interaction with the land surface: a process governed by boundary‐layer and convective‐cloud dynamics. INCOMPASS used the UK Facility for Airborne Atmospheric Measurements (FAAM) BAe‐146 aircraft for the first project of this scale in India, to accrue almost 100 h of observations in June and July 2016. Flights from Lucknow in the northern plains sampled the dramatic contrast in surface and boundary‐layer structures between dry desert air in the west and the humid environment over the northern Bay of Bengal. These flights were repeated in pre‐monsoon and monsoon conditions. Flights from a second base at Bengaluru in southern India measured atmospheric contrasts from the Arabian Sea, over the Western Ghats mountains, to the rain shadow of southeast India and the south Bay of Bengal. Flight planning was aided by forecasts from bespoke 4 km convection‐permitting limited‐area models at the Met Office and India's NCMRWF. On the ground, INCOMPASS installed eddy‐covariance flux towers on a range of surface types, to provide detailed measurements of surface fluxes and their modulation by diurnal and seasonal cycles. These data will be used to better quantify the impacts of the atmosphere on the land surface, and vice versa. INCOMPASS also installed ground instrumentation supersites at Kanpur and Bhubaneswar. Here we motivate and describe the INCOMPASS field campaign. We use examples from two flights to illustrate contrasts in atmospheric structure, in particular the retreating mid‐level dry intrusion during the monsoon onset

Interaction of convective organisation with monsoon precipitation, atmosphere, surface and sea: the 2016 INCOMPASS field campaign in India

The INCOMPASS field campaign combines airborne and ground measurements of the 2016 Indian monsoon, towards the ultimate goal of better predicting monsoon rainfall. The monsoon supplies the majority of water in South Asia, but forecasting from days to the season ahead is limited by large, rapidly developing errors in model parametrizations. The lack of detailed observations prevents thorough understanding of the monsoon circulation and its interaction with the land surface: a process governed by boundary-layer and convective-cloud dynamics. INCOMPASS used the UK Facility for Airborne Atmospheric Measurements (FAAM) BAe-146 aircraft for the first project of this scale in India, to accrue almost 100 hours of observations in June and July 2016. Flights from Lucknow in the northern plains sampled the dramatic contrast in surface and boundary layer structures between dry desert air in the west and the humid environment over the northern Bay of Bengal. These flights were repeated in pre-monsoon and monsoon conditions. Flights from a second base at Bengaluru in southern India measured atmospheric contrasts from the Arabian Sea, over the Western Ghats mountains, to the rain shadow of southeast India and the south Bay of Bengal. Flight planning was aided by forecasts from bespoke 4km convection-permitting limited-area models at the Met Office and India's NCMRWF. On the ground, INCOMPASS installed eddy-covariance flux towers on a range of surface types, to provide detailed measurements of surface fluxes and their modulation by diurnal and seasonal cycles. These data will be used to better quantify the impacts of the atmosphere on the land surface, and vice versa. INCOMPASS also installed ground instrumentation supersites at Kanpur and Bhubaneswar. Here we motivate and describe the INCOMPASS field campaign. We use examples from two flights to illustrate contrasts in atmospheric structure, in particular the retreating mid-level dry intrusion during the monsoon onset

Deep Convective Microphysics Experiment (DCMEX) coordinated aircraft and ground observations: microphysics, aerosol, and dynamics during cumulonimbus development

Cloud feedbacks associated with deep convective anvils remain highly uncertain. In part, this uncertainty arises from a lack of understanding of how microphysical processes influence the cloud radiative effect. In particular, climate models have a poor representation of microphysics processes, thereby encouraging the collection and study of observation data to enable better representation of these processes in models. As such, the Deep Convective Microphysics Experiment (DCMEX) undertook an in situ aircraft and ground-based measurement campaign of New Mexico deep convective clouds during July–August 2022. The campaign coordinated a broad range of instrumentation measuring aerosol, cloud physics, radar, thermodynamics, dynamics, electric fields, and weather. This paper introduces the potential data user to DCMEX observational campaign characteristics, relevant instrument details, and references to more detailed instrument descriptions. Also included is information on the structure and important files in the dataset in order to aid the accessibility of the dataset to new users. Our overview of the campaign cases illustrates the complementary operational observations available and demonstrates the breadth of the campaign cases observed. During the campaign, a wide selection of environmental conditions occurred, ranging from dry, northerly air masses with low wind shear to moist, southerly air masses with high wind shear. This provided a wide range of different convective growth situations. Of 19 flight days, only 2 d lacked the formation of convective cloud. The dataset presented (https://doi.org/10.5285/B1211AD185E24B488D41DD98F957506C; Facility for Airborne Atmospheric Measurements et al., 2024) will help establish a new understanding of processes on the smallest cloud- and aerosol-particle scales and, once combined with operational satellite observations and modelling, can support efforts to reduce the uncertainty of anvil cloud radiative impacts on climate scales

No compelling evidence that preferences for facial masculinity track changes in women’s hormonal status

Although widely cited as strong evidence that sexual selection has shaped human facial-attractiveness judgments, findings suggesting that women’s preferences for masculine characteristics in men’s faces are related to women’s hormonal status are equivocal and controversial. Consequently, we conducted the largest-ever longitudinal study of the hormonal correlates of women’s preferences for facial masculinity (N = 584). Analyses showed no compelling evidence that preferences for facial masculinity were related to changes in women’s salivary steroid hormone levels. Furthermore, both within-subjects and between-subjects comparisons showed no evidence that oral contraceptive use decreased masculinity preferences. However, women generally preferred masculinized over feminized versions of men’s faces, particularly when assessing men’s attractiveness for short-term, rather than long-term, relationships. Our results do not support the hypothesized link between women’s preferences for facial masculinity and their hormonal status

Preference for facial averageness: evidence for a common mechanism in human and macaque infants

Human adults and infants show a preference for average faces, which could stem from a general processing mechanism and may be shared among primates. However, little is known about preference for facial averageness in monkeys. We used a comparative developmental approach and eye-tracking methodology to assess visual attention in human and macaque infants to faces naturally varying in their distance from a prototypical face. In Experiment 1, we examined the preference for faces relatively close to or far from the prototype in 12-month-old human infants with human adult female faces. Infants preferred faces closer to the average than faces farther from it. In Experiment 2, we measured the looking time of 3-month-old rhesus macaques (Macaca mulatta) viewing macaque faces varying in their distance from the prototype. Like human infants, macaque infants looked longer to faces closer to the average. In Experiments 3 and 4, both species were presented with unfamiliar categories of faces (i.e., macaque infants tested with adult macaque faces; human infants and adults tested with infant macaque faces) and showed no prototype preferences, suggesting that the prototypicality effect is experience-dependent. Overall, the findings suggest a common processing mechanism across species, leading to averageness preferences in primates