379 research outputs found
Effect of gyro verticality error on lateral autoland tracking performance for an inertially smoothed control law
The results of a simulation study performed to determine the effects of gyro verticality error on lateral autoland tracking and landing performance are presented. A first order vertical gyro error model was used to generate the measurement of the roll attitude feedback signal normally supplied by an inertial navigation system. The lateral autoland law used was an inertially smoothed control design. The effect of initial angular gyro tilt errors (2 deg, 3 deg, 4 deg, and 5 deg), introduced prior to localizer capture, were investigated by use of a small perturbation aircraft simulation. These errors represent the deviations which could occur in the conventional attitude sensor as a result of the maneuver-induced spin-axis misalinement and drift. Results showed that for a 1.05 deg per minute erection rate and a 5 deg initial tilt error, ON COURSE autoland control logic was not satisfied. Failure to attain the ON COURSE mode precluded high control loop gains and localizer beam path integration and resulted in unacceptable beam standoff at touchdown
Development and validation of a hybrid-computer simulator for a transonic cryogenic wind tunnel
A study was undertaken to model the cryogenic wind tunnel process, to validate the model by the use of experimental data from the Langley 0.3 Meter Transonic Cryogenic Tunnel, and to construct an interactive simulator of the cryogenic tunnel using the validated model. Additionally, this model was used for designing closed loop feedback control laws for regulation of temperature and pressure in the 0.3 meter cryogenic tunnel. The global mathematical model of the cryogenic tunnel that were developed consists of coupled, nonlinear differential governing equations based on an energy state concept of the physical cryogenic phenomena. Process equations and comparisons between actual tunnel responses and computer simulation predictions were examined. Also included are the control laws and simulator responses obtained using the feedback schemes for closed loop control of temperature and pressure were also included
Appendices to an Aqueous Environmental Simulation Model for Mid-south Lakes and Reservoirs
The program simulates some of the major physical, chemical and biological processes occuring within the aqueous phase of lakes and reservoirs. The program was developed to study the eutrophic development of these water bodies
An Aqueous Environmental Simulation Model for Mid-South Lakes and Reservoirs
Quantitative relationships and associated computer program has been developed to simulate some of the major physical, chemical and biological processes occuring within the aqueous phase of lakes and reservoirs. The model was developed, in part, to study the eutrophic development of these water bodies. Emphasis is upon lakes in the Mid-South U.S.A. The physical model reflects the general environment in this region and includes a single stratified period. The chemical subsystem includes nitrogen, phosphorus, oxygen and carbon. The biological subsystem includes phytoplankton, zooplankton, omnivorous fish, carnivorous fish and aerobic bacteria. The model differential equations are solved numerically with the IBM Continuous System Modeling Program (CSMP). The output results (graphical or numerical) of critical eutrophic parameters can be obtained as a function of time (Julian Day), depth and distance down-lake. The model has been adjusted to field data from Beaver Reservoir in Northwest Arkansas. A comparison of the adjusted simulation and the field data is presented along with examples of use of the model for predictive purposes. The final completion report includes an appendix that contains the program listing, documentation and case studies
Flight investigation of manual and automatic VTOL decelerating instrument approaches and landings
A flight investigation was undertaken to study the problems associated with manual and automatic control of steep, decelerating instrument approaches and landings under simulated instrument conditions. The study was conducted with a research helicopter equipped with a three-cue flight-director indicator. The scope of the investigation included variations in the flight-director control laws, glide-path angle, deceleration profile, and control response characteristics. Investigation of the automatic-control problem resulted in the first automated approach and landing to a predetermined spot ever accomplished with a helicopter. Although well-controlled approaches and landings could be performed manually with the flight-director concept, pilot comments indicated the need for a better display which would more effectively integrate command and situation information
Studies of sidewall boundary layer in the Langley 0.3 meter transonic cryogenic tunnel with and without suction
Boundary layer measurements on the sidewalls of the Langley 0.3 Meter Transonic Cryogenic Tunnel were made to determine the effectiveness of the passive boundary layer bleed system over a Reynolds number range from 20 to 200 x 10 to the sixth power per meter at Mach numbers from 0.30 to 0.76. The tunnel sidewall boundary layer displacement thickness was about 2 percent of the width of the test section without the boundary layer bleed. Measured velocity profiles correlated well with the defect law of Hama. With the boundary layer bleed equivalent to about 2 percent of the test section mass flow, the boundary layer displacement thickness reduced to about 1 percent of the test section width, which is generally considered acceptable for testing airfoils. It was also noticed that effectiveness of the bleed was nearly independent of the Mach number and Reynolds number over the range of conditions tested. A comparison of the measured suction effectiveness of the bleed with the finite difference and integral methods of boundary layer calculation showed good agreement
Unraveling the Mechanisms of Isoprenoid Biosynthetic Enzymes: Mechanistic Studies of the Early Stage Enzymes
Isoprenoids (or terpenoids) are a large and structurally diverse class of biomolecules that are essential for the survival of all forms of life. Despite the vast differences in their final structures and functions, the early steps of isoprenoid biosynthesis in all organisms follow one
of only two known biosynthetic pathways: the mevalonate pathway or the methyl erythritol phosphate (MEP) pathway. Interestingly, while humans utilize the mevalonate pathway, many human pathogens rely exclusively on the MEP pathway for the biosynthesis of their isoprenoid compounds. This has
led to a number of mechanistic studies of the MEP-specific pathway enzymes, with the ultimate goal of developing small molecule inhibitors as potential drugs. In addition to their therapeutic value, many of the MEP pathway enzymes also catalyze unusual chemical transformations that are not
well understood. In this review, we will highlight the recent work by us and others towards the elucidation of the catalytic mechanisms of several key enzymes involved in the early stages of isoprenoid biosynthesis. These include 1-deoxy-D-xylulose-5-phosphate reductoisomerase (DXR) and 1-hydroxy-2-methyl-2-(E)-butenyl-4-diphosphate
reductase (IspH) of the MEP pathway, and the type II isopentenyl diphosphate:dimethylallyl diphosphate isomerase (IDI-2) from Staphylococcus aureus. The functions of these enzymes are validated or identified as potential drug targets
Recommended from our members
Emerging Methods to Objectively Assess Pruritus in Atopic Dermatitis.
INTRODUCTION:Atopic dermatitis (AD) is an inflammatory skin disease with a chronic, relapsing course. Clinical features of AD vary by age, duration, and severity but can include papules, vesicles, erythema, exudate, xerosis, scaling, and lichenification. However, the most defining and universal symptom of AD is pruritus. Pruritus or itch, defined as an unpleasant urge to scratch, is problematic for many reasons, particularly its negative impact on quality of life. Despite the profoundly negative impact of pruritus on patients with AD, clinicians and researchers lack standardized and validated methods to objectively measure pruritus. The purpose of this review is to discuss emerging methods to assess pruritus in AD by describing objective patient-centered tools developed or enhanced over the last decade that can be utilized by clinicians and researchers alike. METHODS:This review is based on a literature search in Medline, Embase, and Web of Science databases. The search was performed in February 2019. The keywords were used "pruritus," "itch," "atopic dermatitis," "eczema," "measurements," "tools," "instruments," "accelerometer," "wrist actigraphy," "smartwatch," "transducer," "vibration," "brain mapping," "magnetic resonance imaging," and "positron emission tomography." Only articles written in English were included, and no restrictions were set on study type. To focus on emerging methods, prioritization was given to results from the last decade (2009-2019). RESULTS:The search yielded 49 results in PubMed, 134 results in Embase, and 85 results in Web of Science. Each result was independently reviewed in a standardized manner by two of the authors (M.S., K.L.), and disagreements between reviewers were resolved by consensus. Relevant findings were categorized into the following sections: video surveillance, acoustic surveillance, wrist actigraphy, smart devices, vibration transducers, and neurological imaging. Examples are provided along with descriptions of how each technology works, instances of use in research or clinical practice, and as applicable, reports of validation studies and correlation with other methods. CONCLUSION:The variety of new and improved methods to evaluate pruritus in AD is welcomed by clinicians, researchers, and patients alike. Future directions include next-generation smart devices as well as exploring new territories, such as identifying biomarkers that correlate to itch and machine-learning programs to identify itch processing in the brain. As these efforts continue, it will be essential to remain patient-centered by developing techniques that minimize discomfort, respect privacy, and provide accurate data that can be used to better manage itch in AD
Ecosystem Modeling of College Drinking: Parameter Estimation and Comparing Models to Data
Recently we developed a model composed of five impulsive differential equations that describes the changes in drinking patterns (that persist at epidemic level) amongst college students. Many of the model parameters cannot be measured directly from data; thus, an inverse problem approach, which chooses the set of parameters that results in the “best” model to data fit, is crucial for using this model as a predictive tool. The purpose of this paper is to present the procedure and results of an unconventional approach to parameter estimation that we developed after more common approaches were unsuccessful for our specific problem. The results show that our model provides a good fit to survey data for 32 campuses. Using these parameter estimates, we examined the effect of two hypothetical intervention policies: 1) reducing environmental wetness, and 2) penalizing students who are caught drinking. The results suggest that reducing campus wetness may be a very effective way of reducing heavy episodic (binge) drinking on a college campus, while a policy that penalizes students who drink is not nearly as effective
A Miniaturized Enzymatic Biosensor for Detection of Sensory-Evoked D-serine Release in the Brain
D-serine has been implicated as a brain messenger with central roles in neural signaling and plasticity. Disrupted levels of D-serine in the brain have been associated with neurological disorders, including schizophrenia, depression and Alzheimer's disease. Electrochemical biosensors are attractive tools for measuring real-time in vivo D-serine concentration changes. Current biosensors suffer from relatively large sizes (≥25 μm) making localized cellular measurements challenging, especially for single cell studies. In this work, a robust methodology for the fabrication of a reproducible miniaturized 10 μm D-serine detecting amperometric biosensor was developed. The miniature biosensor incorporated yeast D-amino acid oxidase immobilized on a poly-meta-phenylenediamine modified 10 μm Pt disk microelectrode. The biosensor offered a limit of detection of 0.361 μM (RSD < 10%) with high sensitivity (283 μA cm-2 mM-1, R2 = 0.983). The biosensor was stable for over four hours of continuous use, demonstrated a storage stability of four days and high analyte selectivity. Biosensor selectivity was validated with LC-MS and interferences with yeast D-amino acid oxidase were evaluated using drugs believed to stimulate D-serine release. Ex vivo D-serine measurements were made from Xenopus laevis tadpole brains, demonstrating the utility of the biosensors for measurements on living tissue. We observed that D-serine levels in the brain fluctuate with sensory experience. The biosensors were also used in vivo successfully. Taken together, this study addresses factors for successful and reproducible miniature biosensor fabrication for measuring D-serine in biological samples, for pharmacological evaluation, and for designing point of care devices
- …