Upper limits for PH3 and H2S in Titan's Atmosphere from Cassini CIRS

We have searched for the presence of simple P and S-bearing molecules in Titan's atmosphere, by looking for the characteristic signatures of phosphine and hydrogen sulfide in infrared spectra obtained by Cassini CIRS. As a result we have placed the first upper limits on the stratospheric abundances, which are 1 ppb (PH3) and 330 ppb (H2S), at the 2-sigma significance level.Comment: 12 pages text, 1 table, 2 figure

Constraints on Jupiter’s Stratospheric HCl abundance and chlorine cycle from Herschel/HIFI

Detection of HCl on Jupiter would provide insight into the chlorine cycle and external elemental fluxes on giant planets, yet so far has not been possible. Here we present the most sensitive search for Jupiter׳s stratospheric HCl to date using observations of the 625.907 and 1876.221 GHz spectral lines with Herschel׳s HIFI instrument. HCl was not detected, but we determined the most stringent upper limits so far, improving on previous studies by two orders of magnitude. If HCl is assumed to be uniformly mixed, with a constant volume mixing ratio above the 1 mbar pressure level and has zero abundance below, we obtain a 3-σ upper limit of 0.061 ppb; in contrast, if we assume uniform mixing above the 1 mbar level and allow a non-zero but downward-decreasing abundance from 1 mbar to the troposphere based on eddy diffusion, we obtain a 3-σ upper limit of 0.027 ppb. This is below the abundance expected for a solar composition cometary source and implies that upper stratospheric HCl loss processes are required for consistency with observations of the external oxygen flux. We investigated loss via aerosol scavenging using a simple diffusion model and conclude that it could be a very effective mechanism for HCl removal. Transient scavenging by stratospheric NH3 from impacts is another potentially important loss mechanism. This suggests that it is extremely unlikely that HCl is present in sufficient quantities to be detectable in the near future. An alternative explanation for our very low upper limits could be that HCl is sub-solar in comets or that cometary chlorine exists in inactive reservoirs that are not readily converted to HCl during the impact process

Hiding in the Shadows: Searching for Planets in Pre--transitional and Transitional Disks

Transitional and pre--transitional disks can be explained by a number of mechanisms. This work aims to find a single observationally detectable marker that would imply a planetary origin for the gap and, therefore, indirectly indicate the presence of a young planet. N-body simulations were conducted to investigate the effect of an embedded planet of one Jupiter mass on the production of instantaneous collisional dust derived from a background planetesimal disk. Our new model allows us to predict the dust distribution and resulting observable markers with greater accuracy than previous work. Dynamical influences from a planet on a circular orbit are shown to enhance dust production in the disk interior and exterior to the planet orbit while removing planetesimals from the the orbit itself creating a clearly defined gap. In the case of an eccentric planet the gap opened by the planet is not as clear as the circular case but there is a detectable asymmetry in the dust disk.Comment: Accepted to ApJL 25th September 2013. 4 figures, 1 tabl

Hiding in the Shadows II: Collisional Dust as Exoplanet Markers

Observations of the youngest planets ($\sim$1-10 Myr for a transitional disk) will increase the accuracy of our planet formation models. Unfortunately, observations of such planets are challenging and time-consuming to undertake even in ideal circumstances. Therefore, we propose the determination of a set of markers that can pre-select promising exoplanet-hosting candidate disks. To this end, N-body simulations were conducted to investigate the effect of an embedded Jupiter mass planet on the dynamics of the surrounding planetesimal disk and the resulting creation of second generation collisional dust. We use a new collision model that allows fragmentation and erosion of planetesimals, and dust-sized fragments are simulated in a post process step including non-gravitational forces due to stellar radiation and a gaseous protoplanetary disk. Synthetic images from our numerical simulations show a bright double ring at 850 $\mu$m for a low eccentricity planet, whereas a high eccentricity planet would produce a characteristic inner ring with asymmetries in the disk. In the presence of first generation primordial dust these markers would be difficult to detect far from the orbit of the embedded planet, but would be detectable inside a gap of planetary origin in a transitional disk.Comment: Accepted for publication in Ap

In vivo quantification of peroxisome tethering to chloroplasts in tobacco epidermal cells using optical tweezers

Open access articlePeroxisomes are highly motile organelles that display a range of motions within a short time frame. In static snapshots they can be juxtaposed to chloroplasts which has led to the hypothesis that they are physically interacting. Here, using optical tweezers we have tested the dynamic physical interaction in vivo. Using near-infrared optical tweezers, combined with TIRF microscopy, we were able to trap peroxisomes and approximate the forces involved in chloroplast association in vivo, and observed weaker tethering to additional unknown structures within the cell. We show that chloroplasts and peroxisomes are physically tethered through peroxules, a poorly described structure in plant cells. We suggest peroxules have a novel role in maintaining peroxisome-organelle interactions in the dynamic environment. This could be important for fatty acid mobilisation and photorespiration through interaction with oil bodies and chloroplasts, highlighting a fundamentally important role for organelle interactions for essential biochemistry and physiological processes.Biotechnology and Biological Sciences Research Council (BBSRC)Science and Technology Facilities Council (STFC)Wellcome Trust - Institutional Strategic Support AwardLeverhulme Trus

Probing Titan's Complex Atmospheric Chemistry Using the Atacama Large Millimeter/Submillimeter Array

Titan is Saturn's largest moon, with a thick (1.45 bar) atmosphere composed primarily of molecular nitrogen and methane. Atmospheric photochemistry results in the production of a wide range of complex organic molecules, including hydrocarbons, nitriles, aromatics and other species of possible pre-biotic relevance. Titan's carbon-rich atmosphere may be analogous to that of primitive terrestrial planets throughout the universe, yet its origin, evolution and complete chemical inventory are not well understood. Here we present spatially-resolved maps of emission from C2H5CN, HNC, HC3N, CH3CN and CH3CCH in Titan's atmosphere, observed using the Atacama Large Millimeter/submillimeter Array (ALMA) in 2012-2013. These data show previously-undetected spatial structures for the observed species and provide the first spectroscopic detection of C2H5CN on Titan. Our maps show spatially resolved peaks in Titan's northern and southern hemispheres, consistent with photochemical production and transport in the upper atmosphere followed by subsidence over the poles. The HNC emission peaks are offset from the polar axis, indicating that Titan's mesosphere may be more longitudinally variable than previously thought

A Pre-Landing Assessment of Regolith Properties at the InSight Landing Site

This article discusses relevant physical properties of the regolith at the Mars InSight landing site as understood prior to landing of the spacecraft. InSight will land in the northern lowland plains of Mars, close to the equator, where the regolith is estimated to be ≥3--5 m thick. These investigations of physical properties have relied on data collected from Mars orbital measurements, previously collected lander and rover data, results of studies of data and samples from Apollo lunar missions, laboratory measurements on regolith simulants, and theoretical studies. The investigations include changes in properties with depth and temperature. Mechanical properties investigated include density, grain-size distribution, cohesion, and angle of internal friction. Thermophysical properties include thermal inertia, surface emissivity and albedo, thermal conductivity and diffusivity, and specific heat. Regolith elastic properties not only include parameters that control seismic wave velocities in the immediate vicinity of the Insight lander but also coupling of the lander and other potential noise sources to the InSight broadband seismometer. The related properties include Poisson’s ratio, P- and S-wave velocities, Young’s modulus, and seismic attenuation. Finally, mass diffusivity was investigated to estimate gas movements in the regolith driven by atmospheric pressure changes. Physical properties presented here are all to some degree speculative. However, they form a basis for interpretation of the early data to be returned from the InSight mission.Additional co-authors: Nick Teanby and Sharon Keda

Planned Products of the Mars Structure Service for the InSight Mission to Mars

Abstract The InSight lander will deliver geophysical instruments to Mars in 2018, including seismometers installed directly on the surface (Seismic Experiment for Interior Structure, SEIS). Routine operations will be split into two services, the Mars Structure Service(MSS) and Marsquake Service (MQS), which will be responsible, respectively, for defining the structure models and seismicity catalogs from the mission. The MSS will deliver a series of products before the landing, during the operations, and finally to the Planetary Data System (PDS) archive. Prior to the mission, we assembled a suite of a priori models of Mars, based on estimates of bulk composition and thermal profiles. Initial models during the mission will rely on modeling surface waves and impact-generated body waves independent of prior knowledge of structure. Later modeling will include simultaneous inversion of seismic observations for source and structural parameters. We use Bayesian inversion techniques to obtain robust probability distribution functions of interior structure parameters. Shallow structure will be characterized using the hammering of the heatflow probe mole, as well as measurements of surface wave ellipticity. Crustal scale structure will be constrained by measurements of receiver function and broadband Rayleigh wave ellipticity measurements. Core interacting body wave phases should be observable above modeled martian noise levels, allowing us to constrain deep structure. Normal modes of Mars should also be observable and can be used to estimate the globally averaged 1D structure, while combination with results from the InSight radio science mission and orbital observations will allow for constraint of deeper structure

No detection of methane on Mars from early ExoMars Trace Gas Orbiter observations

The detection of methane on Mars has been interpreted as indicating that geochemical or biotic activities could persist on Mars today. A number of different measurements of methane show evidence of transient, locally elevated methane concentrations and seasonal variations in background methane concentrations. These measurements, however, are difficult to reconcile with our current understanding of the chemistry and physics of the Martian atmosphere, which-given methane's lifetime of several centuries-predicts an even, well mixed distribution of methane. Here we report highly sensitive measurements of the atmosphere of Mars in an attempt to detect methane, using the ACS and NOMAD instruments onboard the ESA-Roscosmos ExoMars Trace Gas Orbiter from April to August 2018. We did not detect any methane over a range of latitudes in both hemispheres, obtaining an upper limit for methane of about 0.05 parts per billion by volume, which is 10 to 100 times lower than previously reported positive detections. We suggest that reconciliation between the present findings and the background methane concentrations found in the Gale crater would require an unknown process that can rapidly remove or sequester methane from the lower atmosphere before it spreads globally

Martian dust storm impact on atmospheric H₂O and D/H observed by ExoMars Trace Gas Orbiter

Global dust storms on Mars are rare but can affect the Martian atmosphere for several months. They can cause changes in atmospheric dynamics and inflation of the atmosphere, primarily owing to solar heating of the dust. In turn, changes in atmospheric dynamics can affect the distribution of atmospheric water vapour, with potential implications for the atmospheric photochemistry and climate on Mars. Recent observations of the water vapour abundance in the Martian atmosphere during dust storm conditions revealed a high-altitude increase in atmospheric water vapour that was more pronounced at high northern latitudes, as well as a decrease in the water column at low latitudes. Here we present concurrent, high-resolution measurements of dust, water and semiheavy water (HDO) at the onset of a global dust storm, obtained by the NOMAD and ACS instruments onboard the ExoMars Trace Gas Orbiter. We report the vertical distribution of the HDO/H O ratio (D/H) from the planetary boundary layer up to an altitude of 80 kilometres. Our findings suggest that before the onset of the dust storm, HDO abundances were reduced to levels below detectability at altitudes above 40 kilometres. This decrease in HDO coincided with the presence of water-ice clouds. During the storm, an increase in the abundance of H2O and HDO was observed at altitudes between 40 and 80 kilometres. We propose that these increased abundances may be the result of warmer temperatures during the dust storm causing stronger atmospheric circulation and preventing ice cloud formation, which may confine water vapour to lower altitudes through gravitational fall and subsequent sublimation of ice crystals. The observed changes in H2O and HDO abundance occurred within a few days during the development of the dust storm, suggesting a fast impact of dust storms on the Martian atmosphere