Parametric Study of a Single Effect Lithium Bromide-Water Absorption Chiller Powered by a Renewable Heat Source

This work investigates the performance of a single-effect absorption chiller utilizing an aqueous lithium bromide solution as the working fluid and driven by hot fluid rejected from either a geothermal power plant or the outlet of a thermal solar collector. This relatively low enthalpy return fluid, which will otherwise be reinjected back into the earth, will be utilized as the thermal energy source of the chiller. Although such chillers are considered low-grade energy refrigeration cycles, the one proposed here has an advantage in terms of economy and efficiency. A parametric analysis is performed using Engineering Equation Solver software and is used to highlight the effect of the heat exchanger size on the coefficient of performance of the chiller. The analysis proved that the proposed device can operate with excellent cooling capacity, reaching 16 kW, and a relatively high coefficient of performance (~ 0.7) while being driven by the low-grade energy. The heat source temperature, solution heat exchanger effectiveness and the size of the absorber were shown to be key parameters for the design and operation of absorption chillers. Moreover, increasing the heat source mass flow rate has a significant impact on both cooling capacity and coefficient of performance at low values (< 10 kg/s) and unnoticeable impact at higher values (> 10 kg/s)

Optimal conditions for olive mill wastewater treatment using ultrasound and advanced oxidation processes

© 2019 Elsevier B.V. The treatment of olive mill wastewater (OMW) in Jordan was investigated in this work using ultrasound oxidation (sonolysis) combined with other advanced oxidation processes such as ultraviolet radiation, hydrogen peroxide (H2O2) and titanium oxide (TiO2) catalyst. The efficiency of the combined oxidation process was evaluated based on the changes in the chemical oxygen demand (COD). The results showed that 59% COD removal was achieved within 90 min in the ultrasound /UV/TiO2 system. A more significant synergistic effect was observed on the COD removal efficiency when a combination of US/UV/TiO2 (sonophotocatalytic) processes was used at low ultrasound frequency. The results were then compared with the COD values obtained when each of these processes was used individually. The effects of different operating conditions such as, ultrasound power, initial COD concentration, the concentration of TiO2, frequency of ultrasound, and temperature on the OMW oxidation efficiency were studied and evaluated. The effect of adding a radical scavenger (sodium carbonate) on the OMW oxidation efficiency was investigated. The results showed that the sonophotocatalytic oxidation of OMW was affected by the initial COD, acoustic power, temperature and TiO2 concentration. The sonophotocatalytic oxidation of OMW increased with increasing the ultrasound power, temperature and H2O2 concentration. Sonolysis at frequency of 40 kHz combined with photocatalysis was not observed to have a significant effect on the OMW oxidation compared to sonication at frequency of 20 kHz. It was also found that the OMW oxidation was suppressed by the presence of the radical scavenger. The COD removal efficiency increased slightly with the increase of TiO2 concentration up to certain point due to the formation of oxidizing species. At ultrasound frequency of 20 kHz, considerable COD reduction of OMW was reported, indicating the effectiveness of the combined US/UV/TiO2 process for the OMW treatment

Integration of solar chimney power plant with photovoltaic for co-cooling, power production, and water desalination

This work explores the technical possibilities of increasing the efficiency of a standard solar chimney power plant (SCPP) by integrating it with photovoltaic (PV) panels. The integration is possible by using the collector circumference to install the PV collectors, which provide a heat sink, allow for the better harvesting of the solar radiation, and increase energy production. The new design led to an increase in the annual electricity production from 380 to 494 MWh and water production from 278 to 326 k tons/year compared with the standard SCPP, marking an increase of 30% and 17%, respectively. The results also show that the integration reduced the greenhouse gas emissions (GHG), the localized cost of energy, and the capital cost of investment by 30%, 36%, and 20%, respectively. The proposed design supports the sustainable replacement of the existing desalination plants with zero operational costs and an excellent reduction in greenhouse gas emissions.The authors would like to the thank the Al Hussien Technical University, Amman, Jordan (www.htu.edu.jo, (accessed on 30 August 2021).) for their support in developing this work.Scopu

Impact of CO2 concentration and ambient conditions on microalgal growth and nutrient removal from wastewater by a photobioreactor

The increase in atmospheric CO2 concentration and the release of nutrients from wastewater treatment plants (WWTPs) are environmental issues linked to several impacts on ecosystems. Numerous technologies have been employed to resolves these issues, nonetheless, the cost and sustainability are still a concern. Recently, the use of microalgae appears as a cost-effective and sustainable solution because they can effectively uptake CO2 and nutrients resulting in biomass production that can be processed into valuable products. In this study single (Spirulina platensis (SP.PL) and mixed indigenous microalgae (MIMA) strains were employed, over a 20-month period, for simultaneous removal of CO2 from flue gases and nutrient from wastewater under ambient conditions of solar irradiation and temperature. The study was performed at a pilot scale photo-bioreactor and the effect of feed CO2 gas concentration in the range (2.5–20%) on microalgae growth and biomass production, carbon dioxide bio-fixation rate, and the removal of nutrients and organic matters from wastewater was assessed. The MIMA culture performed significantly better than the monoculture, especially with respect to growth and CO2 bio-fixation, during the mild season; against this, the performance was comparable during the hot season. Optimum performance was observed at 10% CO2 feed gas concentration, though MIMA was more temperature and CO2 concentration sensitive. MIMA also provided greater removal of COD and nutrients (~83% and >99%) than SP.PL under all conditions studied. The high biomass productivities and carbon bio-fixation rates (0.796–0.950 gdw·L−1·d−1 and 0.542–1.075 gC·L−1·d−1 contribute to the economic sustainability of microalgae as CO2 removal process. Consideration of operational energy revealed that there is a significant energy benefit from cooling to sustain the highest productivities on the basis of operating energy alone, particularly if the indigenous culture is used

Efficient removal of phenol compounds from water environment using Ziziphus leaves adsorbent

© 2020 Elsevier B.V. Industrial processes generate toxic organic molecules that pollute environment water. Phenol and its derivative are classified among the major pollutant compounds found in water. They are naturally found in some industrial wastewater effluents. The removal of phenol compounds is therefore essential because they are responsible for severe organ damage if they exist above certain limits. In this study, ground Ziziphus leaves were utilized as adsorbents for phenolic compounds from synthetic wastewater samples. Several experiments were performed to study the effect of several conditions on the capacity of the Ziziphus leaves adsorbent, namely: the initial phenol concentration, the adsorbent concentration, temperature, pH value, and the presence of foreign salts (NaCl and KCl). The experimental results indicated that the adsorption process reached equilibrium in about 4 h. A drop in the amount of phenol removal, especially at higher initial concentration, was noticed upon increasing the temperature from 25 to 45 °C. This reflects the exothermic nature of the adsorption process. This was also confirmed by the calculated negative enthalpy of adsorption (−64.8 kJ/mol). A pH of 6 was found to be the optimum value at which the highest phenol removal occurred with around 15 mg/g at 25 °C for an initial concentration of 200 ppm. The presence of foreign salts has negatively affected the phenol adsorption process. The fitting of the experimental data, using different adsorption isotherms, indicated that the Harkins-Jura isotherm model was the best fit, evident by the high square of the correlation coefficient (R2) values greater than 0.96. The kinetic study revealed that the adsorption was represented by a pseudo-second-order reaction. The results of this study offer a basis to use Ziziphus leaves as promising adsorbents for efficient phenol removal from wastewater

Current status of CO2 capture with ionic liquids: Development and progress

Global warming triggered by greenhouse gas (GHG) emissions, particularly carbon dioxide (CO2), significantly influences climate change and has become a common environmental issue recently. The current amine-based technologies (ABTs) for CO2 capture (CAPCO2) have high energy demand, low absorption, and desorption rates, and are less environmentally sustainable due to high emissions of volatile solvents. Therefore, the development of environmentally friendly CAPCO2 materials and/or processes is a growing area of research. The utilization of ionic liquids (ILs) for CAPCO2 has recently attracted attention. The unique characteristics of ILs, such as their low vapor pressure and high affinity for CAPCO2 as well as their low volatility make them a viable substitute for the existing processes. This work provides a comprehensive overview of the accomplishments and challenges during the use of ILs for CAPCO2. The Review also outlines the mechanisms of the CAPCO2 with ILs at the molecular level, the properties of ILs, characterization of the CO2/IL systems, and the effect of operating conditions on CO2 uptake (UPCO2) capacity by ILs. It also emphasizes the impact of cations, anions, and functional groups on the solubility of CO2 ((SCO2)) in ILs as well as the biodegradability and toxicity of ILs. Additionally, recent advances in IL membrane technology for the CAPCO2 processes are considered. Lastly, the contribution of molecular simulations to create and assess ILs was reviewed. Protic and aprotic ILs properties have shown outstanding efficiency of UPCO2. The interactions between the anionic part of IL and CO2 enhance the UPCO2 and outperform the efficiency of traditional organic solvents. Functionalized ionic liquids (FUNILs) with tuned functional groups, supported ionic liquids membranes (SILMs) as well as reversible ionic liquids (RILs) have improved the efficiency of ILs as a promising CO2 capturing process from industrial streams even under low CO2 partial pressure. The relative importance of the chemical breakdown of the IL constituents (cation-anion interfacial structuring) during the CAPCO2 process at different operating temperatures is unclear, and more research in this area is required to better inform the design of new ILs. This review provides a proper/systematic guideline to help ILs manufacturers and engineers design high-capacity ILs for appropriate CAPCO2. 2023 The AuthorsThe authors acknowledge the support provided by Qatar University grant No QUCG-CENG-21/22-3. The statements made herein are solely the responsibility of the authors. Open Access funding provided by the Qatar National Library.Scopu

Synthesis of new functionalized Calix[4]arene modified silica resin for the adsorption of metal ions: Equilibrium, thermodynamic and kinetic modeling studies

In this study, a new efficient resin-based material has been synthesized through the surface modification of silica by functionalized calix[4]arene and applied for the adsorption of metal ions from aqueous media. The synthesis of functionalized calix[4]arene modified silica (FCMS) resin was characterized by FTIR, CHNS, BET surface area, SEM analyses. The FCMS resin has high thermal and chemical stabilities that were checked by the thermogravimetric analysis and various acidic/basic conditions. The efficiency of the FCMS resin was checked by performing a set of batch experiments under optimized parameters such as concentration of the metal solution, pH, resin dosage, time, temperature, and competitive adsorption in mixed solutions. The results showed that better adsorption has been achieved at pH 7, with 25 mg adsorbent dosage and 10 min contact time. The equilibrium kinetic study showed that the metal adsorption follows the pseudo 2nd order kinetic model with quite high coefficients of determination values (R-2 > 0.99). The experimental data have been validated by applying three adsorption isotherm models and the results revealed that the Freundlich isotherm model (R-2 > 0.99) was the best fit for the adsorption of Cu2+, Pb2+, and Cd2+ ions. However, the sorption energy calculated from the D-R isotherm model for Cu2+, Pb2+, and Cd2+ ions suggested that an ion-exchange mechanism is involved on the surface of the FCMS resin. The thermodynamic data demonstrated that the reaction is spontaneous and endothermic. The FCMS resin was also applied on real wastewater samples and the results demonstrated that the resin has a good ability to treat metal-contaminated wastewater. (C) 2021 Elsevier B.V. All rights reserved

What is a smart device? - a conceptualisation within the paradigm of the internet of things

The Internet of Things (IoT) is an interconnected network of objects which range from simple sensors to smartphones and tablets; it is a relatively novel paradigm that has been rapidly gaining ground in the scenario of modern wireless telecommunications with an expected growth of 25 to 50 billion of connected devices for 2020 Due to the recent rise of this paradigm, authors across the literature use inconsistent terms to address the devices present in the IoT, such as mobile device, smart device, mobile technologies or mobile smart device. Based on the existing literature, this paper chooses the term smart device as a starting point towards the development of an appropriate definition for the devices present in the IoT. This investigation aims at exploring the concept and main features of smart devices as well as their role in the IoT. This paper follows a systematic approach for reviewing compendium of literature to explore the current research in this field. It has been identified smart devices as the primary objects interconnected in the network of IoT, having an essential role in this paradigm. The developed concept for defining smart device is based on three main features, namely context-awareness, autonomy and device connectivity. Other features such as mobility and userinteraction were highly mentioned in the literature, but were not considered because of the nature of the IoT as a network mainly oriented to device-to-device connectivity whether they are mobile or not and whether they interact with people or not. What emerges from this paper is a concept which can be used to homogenise the terminology used on further research in the Field of digitalisation and smart technologies

Effects of hospital facilities on patient outcomes after cancer surgery: an international, prospective, observational study

Background Early death after cancer surgery is higher in low-income and middle-income countries (LMICs) compared with in high-income countries, yet the impact of facility characteristics on early postoperative outcomes is unknown. The aim of this study was to examine the association between hospital infrastructure, resource availability, and processes on early outcomes after cancer surgery worldwide.Methods A multimethods analysis was performed as part of the GlobalSurg 3 study-a multicentre, international, prospective cohort study of patients who had surgery for breast, colorectal, or gastric cancer. The primary outcomes were 30-day mortality and 30-day major complication rates. Potentially beneficial hospital facilities were identified by variable selection to select those associated with 30-day mortality. Adjusted outcomes were determined using generalised estimating equations to account for patient characteristics and country-income group, with population stratification by hospital.Findings Between April 1, 2018, and April 23, 2019, facility-level data were collected for 9685 patients across 238 hospitals in 66 countries (91 hospitals in 20 high-income countries; 57 hospitals in 19 upper-middle-income countries; and 90 hospitals in 27 low-income to lower-middle-income countries). The availability of five hospital facilities was inversely associated with mortality: ultrasound, CT scanner, critical care unit, opioid analgesia, and oncologist. After adjustment for case-mix and country income group, hospitals with three or fewer of these facilities (62 hospitals, 1294 patients) had higher mortality compared with those with four or five (adjusted odds ratio [OR] 3.85 [95% CI 2.58-5.75]; p&lt;0.0001), with excess mortality predominantly explained by a limited capacity to rescue following the development of major complications (63.0% vs 82.7%; OR 0.35 [0.23-0.53]; p&lt;0.0001). Across LMICs, improvements in hospital facilities would prevent one to three deaths for every 100 patients undergoing surgery for cancer.Interpretation Hospitals with higher levels of infrastructure and resources have better outcomes after cancer surgery, independent of country income. Without urgent strengthening of hospital infrastructure and resources, the reductions in cancer-associated mortality associated with improved access will not be realised

Reducing the environmental impact of surgery on a global scale: systematic review and co-prioritization with healthcare workers in 132 countries

Abstract Background Healthcare cannot achieve net-zero carbon without addressing operating theatres. The aim of this study was to prioritize feasible interventions to reduce the environmental impact of operating theatres. Methods This study adopted a four-phase Delphi consensus co-prioritization methodology. In phase 1, a systematic review of published interventions and global consultation of perioperative healthcare professionals were used to longlist interventions. In phase 2, iterative thematic analysis consolidated comparable interventions into a shortlist. In phase 3, the shortlist was co-prioritized based on patient and clinician views on acceptability, feasibility, and safety. In phase 4, ranked lists of interventions were presented by their relevance to high-income countries and low–middle-income countries. Results In phase 1, 43 interventions were identified, which had low uptake in practice according to 3042 professionals globally. In phase 2, a shortlist of 15 intervention domains was generated. In phase 3, interventions were deemed acceptable for more than 90 per cent of patients except for reducing general anaesthesia (84 per cent) and re-sterilization of ‘single-use’ consumables (86 per cent). In phase 4, the top three shortlisted interventions for high-income countries were: introducing recycling; reducing use of anaesthetic gases; and appropriate clinical waste processing. In phase 4, the top three shortlisted interventions for low–middle-income countries were: introducing reusable surgical devices; reducing use of consumables; and reducing the use of general anaesthesia. Conclusion This is a step toward environmentally sustainable operating environments with actionable interventions applicable to both high– and low–middle–income countries