Usability evaluation of a clinical decision support tool for osteoporosis disease management

<p>Abstract</p> <p>Background</p> <p>Osteoporosis affects over 200 million people worldwide at a high cost to healthcare systems. Although guidelines are available, patients are not receiving appropriate diagnostic testing or treatment. Findings from a systematic review of osteoporosis interventions and a series of focus groups were used to develop a functional multifaceted tool that can support clinical decision-making in osteoporosis disease management at the point of care. The objective of our study was to assess how well the prototype met functional goals and usability needs.</p> <p>Methods</p> <p>We conducted a usability study for each component of the tool--the Best Practice Recommendation Prompt (BestPROMPT), the Risk Assessment Questionnaire (RAQ), and the Customised Osteoporosis Education (COPE) sheet--using the framework described by Kushniruk and Patel. All studies consisted of one-on-one sessions with a moderator using a standardised worksheet. Sessions were audio- and video-taped and transcribed verbatim. Data analysis consisted of a combination of qualitative and quantitative analyses.</p> <p>Results</p> <p>In study 1, physicians liked that the BestPROMPT can provide customised recommendations based on risk factors identified from the RAQ. Barriers included lack of time to use the tool, the need to alter clinic workflow to enable point-of-care use, and that the tool may disrupt the real reason for the visit. In study 2, patients completed the RAQ in a mean of 6 minutes, 35 seconds. Of the 42 critical incidents, 60% were navigational and most occurred when the first nine participants were using the stylus pen; no critical incidents were observed with the last six participants that used the touch screen. Patients thought that the RAQ questions were easy to read and understand, but they found it difficult to initiate the questionnaire. Suggestions for improvement included improving aspects of the interface and navigation. The results of study 3 showed that most patients were able to understand and describe sections of the COPE sheet, and all considered discussing the information with their physicians. Suggestions for improvement included simplifying the language and improving the layout.</p> <p>Conclusions</p> <p>Findings from the three studies informed changes to the tool and confirmed the importance of usability testing on all end users to reduce errors, and as an important step in the development process of knowledge translation interventions.</p

Evaluation of a clinical decision support tool for osteoporosis disease management: protocol for an interrupted time series design

<p>Abstract</p> <p>Background</p> <p>Osteoporosis affects over 200 million people worldwide at a high cost to healthcare systems. Although guidelines on assessing and managing osteoporosis are available, many patients are not receiving appropriate diagnostic testing or treatment. Findings from a systematic review of osteoporosis interventions, a series of mixed-methods studies, and advice from experts in osteoporosis and human-factors engineering were used collectively to develop a multicomponent tool (targeted to family physicians and patients at risk for osteoporosis) that may support clinical decision making in osteoporosis disease management at the point of care.</p> <p>Methods</p> <p>A three-phased approach will be used to evaluate the osteoporosis tool. In phase 1, the tool will be implemented in three family practices. It will involve ensuring optimal functioning of the tool while minimizing disruption to usual practice. In phase 2, the tool will be pilot tested in a quasi-experimental interrupted time series (ITS) design to determine if it can improve osteoporosis disease management at the point of care. Phase 3 will involve conducting a qualitative postintervention follow-up study to better understand participants' experiences and perceived utility of the tool and readiness to adopt the tool at the point of care.</p> <p>Discussion</p> <p>The osteoporosis tool has the potential to make several contributions to the development and evaluation of complex, chronic disease interventions, such as the inclusion of an implementation strategy prior to conducting an evaluation study. Anticipated benefits of the tool may be to increase awareness for patients about osteoporosis and its associated risks and provide an opportunity to discuss a management plan with their physician, which may all facilitate patient self-management.</p

Muon reconstruction and identification efficiency in ATLAS using the full Run 2 pp collision data set at \sqrt{s}=13 TeV

This article documents the muon reconstruction and identification efficiency obtained by the ATLAS experiment for 139 \hbox {fb}^{-1} of pp collision data at \sqrt{s}=13 TeV collected between 2015 and 2018 during Run 2 of the LHC. The increased instantaneous luminosity delivered by the LHC over this period required a reoptimisation of the criteria for the identification of prompt muons. Improved and newly developed algorithms were deployed to preserve high muon identification efficiency with a low misidentification rate and good momentum resolution. The availability of large samples of Z\rightarrow \mu \mu and J/\psi \rightarrow \mu \mu decays, and the minimisation of systematic uncertainties, allows the efficiencies of criteria for muon identification, primary vertex association, and isolation to be measured with an accuracy at the per-mille level in the bulk of the phase space, and up to the percent level in complex kinematic configurations. Excellent performance is achieved over a range of transverse momenta from 3 GeV to several hundred GeV, and across the full muon detector acceptance of |\eta |<2.7

Genome-wide survey of SNP variation uncovers the genetic structure of cattle breeds

status: publishe

Direct constraint on the Higgs–charm coupling from a search for Higgs boson decays into charm quarks with the ATLAS detector

A search for the Higgs boson decaying into a pair of charm quarks is presented. The analysis uses proton–proton collisions to target the production of a Higgs boson in association with a leptonically decaying W or Z boson. The dataset delivered by the LHC at a centre-of-mass energy of and recorded by the ATLAS detector corresponds to an integrated luminosity of 139 fb−1. Flavour-tagging algorithms are used to identify jets originating from the hadronisation of charm quarks. The analysis method is validated with the simultaneous measurement of WW, WZ and ZZ production, with observed (expected) significances of 2.6 (2.2) standard deviations above the background-only prediction for the (W/Z)Z(→cc¯) process and 3.8 (4.6) standard deviations for the (W/Z)W(→cq) process. The (W/Z)H(→cc¯) search yields an observed (expected) upper limit of 26 (31) times the predicted Standard Model cross-section times branching fraction for a Higgs boson with a mass of , corresponding to an observed (expected) constraint on the charm Yukawa coupling modifier |κc|<8.5 (12.4), at the 95% confidence level. A combination with the ATLAS (W/Z)H,H→bb¯ analysis is performed, allowing the ratio κc/κb to be constrained to less than 4.5 at the 95% confidence level, smaller than the ratio of the b- and c-quark masses, and therefore determines the Higgs-charm coupling to be weaker than the Higgs-bottom coupling at the 95% confidence level

Observation of electroweak production of two jets in association with an isolated photon and missing transverse momentum, and search for a Higgs boson decaying into invisible particles at 13 TeV with the ATLAS detector

This paper presents the measurement of the electroweak production of two jets in association with a $Z\gamma$ pair with the $Z$ boson decaying into two neutrinos. It also presents the search for invisible or partially invisible decays of a Higgs boson with a mass of 125 GeV produced through vector-boson fusion with a photon in the final state. These results use data from LHC proton-proton collisions at $\sqrt{s}$ = 13 TeV collected with the ATLAS detector corresponding to an integrated luminosity of 139 fb$^{-1}$. The event signature, shared by all benchmark processes considered for measurements and searches, is characterized by a significant amount of unbalanced transverse momentum and a photon in the final state, in addition to a pair of forward jets. For electroweak production of $Z\gamma$ in association with two jets, the background-only hypothesis is rejected with an observed (expected) significance of 5.2 (5.1) standard deviations. The measured fiducial cross-section for this process is 1.31$\pm$0.29 fb. Observed (expected) upper limit of 0.37 (0.34) at 95% confidence level is set on the branching ratio of a 125 GeV Higgs boson to invisible particles, assuming the Standard Model production cross-section. The signature is also interpreted in the context of decays of a Higgs boson to a photon and a dark photon. An observed (expected) 95% CL upper limit on the branching ratio for this decay is set at 0.018 (0.017), assuming the 125 GeV Standard Model Higgs boson production cross-section

High stakes and high emotions: providing safe care in Canadian emergency departments

Samina Ali,1,2 Denise Thomson,3 Timothy A D Graham,4 Sean E Rickard,3 Antonia S Stang5 1Women and Children&rsquo;s Health Research Institute, 2Department of Pediatrics, 3Cochrane Child Health Field, Department of Pediatrics, University of Alberta, Edmonton, 4Department of Emergency Medicine, 5Section of Emergency Medicine, Department of Pediatrics, University of Calgary, Calgary, AB, Canada Background: The high-paced, unpredictable environment of the emergency department (ED) contributes to errors in patient safety. The ED setting becomes even more challenging when dealing with critically ill patients, particularly with children, where variations in size, weight, and form present practical difficulties in many aspects of care. In this commentary, we will explore the impact of the health care providers&rsquo; emotional reactions while caring for critically ill patients, and how this can be interpreted and addressed as a patient safety issue. Discussion: ED health care providers encounter high-stakes, high-stress clinical scenarios, such as pediatric cardiac arrest or resuscitation. This health care providers&rsquo; stress, and at times, distress, and its potential contribution to medical error, is underrepresented in the current medical literature. Most patient safety research is limited to error reporting systems, especially medication-related ones, an approach that ignores the effects of health care provider stress as a source of error, and limits our ability to learn from the event. Ways to mitigate this stress and avoid this type of patient safety concern might include simulation training for rare, high-acuity events, use of pre-determined clinical order sets, and post-event debriefing. Conclusion: While there are physiologic and anatomic differences that contribute to patient safety, we believe that they are insufficient to explain the need to address critical life-threatening event-related patient safety issues for both adults and, especially, children. Many factors make patient safety during critical medical events distinct from general patient safety issues, but it is, perhaps, this heightened high-stress, emotional climate that is the most distinct and important part of all. We believe that consideration of this concept is essential when discussing safety improvement in critical medical events. Keywords: emergency department, pediatrics, patient safety, distres

A Mixed-Mode Sampled-Data Simulation Program

A program is presented which allows the simulation of mixed sampled data, continuous analog and digital signal processing systems. The intention is to support the VLSI implementation of communication applications. Particular focus is on switched-capacitor filters, digital delay-line structures, A/D converters, and arbitrary analog and digital functional models. The program's efficiency allows it to be used as a tool to explore signal processing algorithms in a form tied to the proposed VLSI realization. Copyrigh

Assessing the role of federal community assistance programs to develop biomass utilization capacity in the western United States

As forest biomass utilization becomes cost effective to harvest, more areas at risk of catastrophic wildfire can be thinned of dense brush and small diameter trees. In an effort to increase biomass utilization, the USDA Forest Service granted more than $36 million in National Fire Plan-Economic Action Program funds in the western United States during fiscal years 2001 to 2003. Interviews with program coordinators and grant recipients were used to characterize the types of investment strategies used and to assess accomplishments relative to national fuels reduction objectives. Findings include a strong emphasis on grants leveraging other funding sources, coordination of resources to increase utilization capacity, and the need for technical assistance to facilitate project design and implementation. We conclude that community assistance programs may help to create the type of utilization capacity necessary to reduce hazardous fuels, but that sustained progress will depend on synergistic activities on multiple fronts and improved demonstration of program accomplishments.Biomass utilization Community assistance programs Hazardous fuel reduction Western United States

Reproducibility and Precision of CT Scans to Evaluate Tibial Component Rotation.

Place: United StatesBACKGROUND: Component rotation likely plays a greater role on the survivorship and outcomes of total knee arthroplasties than is currently known. Our goal was to evaluate the precision, interobserver reliability, and intrarater reliability of tibial component rotation as measured by computed tomography (CT) scan, regardless of measurement technique. METHODS: Three fellowship-trained, academic arthroplasty surgeons independently measured tibial component rotation on CT scans of 62 total knee arthroplasties using their methods of choice. Measurements were repeated at least 2 weeks after the initial measurement. The precision of the measurements was assessed using a formal 8-step protocol as the gold standard. Intraclass correlation coefficients (ICCs) were calculated to evaluate precision, interobserver agreement, and intrarater reliability RESULTS: The interobserver agreement between the 3 surgeons for tibial component rotation was also moderate (ICC = 0.52). The intrarater reliability of tibial rotation was excellent (ICC = 0.81). Comparison of surgeons' measurement to a validated gold standard revealed only moderate precision for tibial component rotation (ICC = 0.64). CONCLUSION: Practicing surgeons measuring tibial rotation were internally consistent, but failed to demonstrate satisfactory precision and interobserver agreement. We support the adoption of standardized criteria for the measurement of tibial component rotation on CT scans