The determination and evaluation of Nitinol constitutive models for finite element analysis

Superelastic Ni-Ti (Nitinol) is a member of the shape memory alloy (SMA) family of metals. The physical properties of Nitinol are highly dependant on a number of factors, including manufacturing method, subsequent processing, operating temperature, and strain rate. These factors complicate the prescription of material constitutive models, leading to complexities in the computational analysis of Nitinol components. The current work explores the limitations in the Nitinol material model available in existing commercial finite element (FE) software using a series of specially design experimental tests and representative FE models

Advanced materials for solid oxide fuel cells

Purpose of the research is to improve the properties of current state- of-the-art materials used for SOFCs. The project includes interconnect development, high-performance cathode, electrochemical testing, and accelerated testing. This document reports results of mechanical tests (bend strength, elastic modulus, fracture strength) of acceptor-substituted lanthanum chromite (interconnect material)

Short-term protein supplementation does not alter energy intake, macronutrient intake and appetite in 50–75 year old adults

Ageing is associated with a reduction in muscle mass and strength, termed sarcopenia. Dietary protein is important for the maintenance of muscle mass through the promotion of muscle protein synthesis. However, protein is also reported to be a highly satiating nutrient. This raises concerns that protein intake for musculoskeletal health reasons in older adults may exacerbate age-related decreased appetite and may result in reduced energy and nutrient intake. This study aimed to investigate the effect of short-term protein supplementation and its timing (morning vs. evening), on energy and nutrient intake and appetite measures in middle-older age adults. Twenty-four 50–75 year olds were recruited to a randomised cross-over trial. In phase 1 (pre-supplementation) participants completed a food diary and reported hunger and appetite on three alternate days. During the second and third phases, participants consumed a 20 g whey protein gel (78 mL/368 kJ), for four days, either in the morning (after breakfast) or the evening (before bed), whilst completing the same assessments as phase 1. No differences in dietary intakes of energy, macronutrients and micronutrients were recorded when comparing the pre-supplementation phase to the protein supplementation phases, irrespective of timing (excluding the contribution of the protein supplement itself). Similarly, no differences were observed in self-reported feelings of hunger and appetite. In conclusion, a 20 g/day whey protein supplement given outside of meal-times did not alter habitual dietary intakes, hunger or appetite in this middle-older age adult population in the short-term. This approach may be a useful strategy to increasing habitual protein intake in the middle-older age population

Fabrication of an Antenna-Coupled Bolometer for Cosmic Microwave Background Polarimetry

We describe the development of a detector for precise measurements of the cosmic microwave background polarization. The detector employs a waveguide to couple light between a pair of Mo/Au superconducting transition edge sensors (TES) and a feedhorn. Incorporation of an on-chip ortho-mode transducer (OMT) results in high isolation. The OMT is micromachined and bonded to the microstrip and TES circuits in a low temperature wafer bonding process. The wafer bonding process incorporates a buried superconducting niobium layer with a single crystal silicon layer which serves as the leg isolated TES membrane and as the microstrip dielectric. We describe the micromachining and wafer bonding process and report measurement results of the microwave circuitry operating in the 29-43GHz band along with Johnson noise measurements of the TES membrane structures and development of Mo/Au TES operating under '00mK

Scale setting for alpha_s beyond leading order

We present a general procedure for incorporating higher-order information into the scale-setting prescription of Brodsky, Lepage and Mackenzie. In particular, we show how to apply this prescription when the leading coefficient or coefficients in a series in the strong coupling alpha_s are anomalously small and the original prescription can give an unphysical scale. We give a general method for computing an optimum scale numerically, within dimensional regularization, and in cases when the coefficients of a series are known. We apply it to the heavy quark mass and energy renormalization in lattice NRQCD, and to a variety of known series. Among the latter, we find significant corrections to the scales for the ratio of e+e- to hadrons over muons, the ratio of the quark pole to MSbar mass, the semi-leptonic B-meson decay width, and the top decay width. Scales for the latter two decay widths, expressed in terms of MSbar masses, increase by factors of five and thirteen, respectively, substantially reducing the size of radiative corrections.Comment: 39 pages, 15 figures, 5 tables, LaTeX2

Numerical analysis of the radio-frequency single-electron transistor operation

We have analyzed numerically the response and noise-limited charge sensitivity of a radio-frequency single-electron transistor (RF-SET) in a non-superconducting state using the orthodox theory. In particular, we have studied the performance dependence on the quality factor Q of the tank circuit for Q both below and above the value corresponding to the impedance matching between the coaxial cable and SET.Comment: 14 page

A terminal assessment of stages theory : introducing a dynamic states approach to entrepreneurship

Stages of Growth models were the most frequent theoretical approach to understanding entrepreneurial business growth from 1962 to 2006; they built on the growth imperative and developmental models of that time. An analysis of the universe of such models (N=104) published in the management literature shows no consensus on basic constructs of the approach, nor is there any empirical confirmations of stages theory. However, by changing two propositions of the stages models, a new dynamic states approach is derived. The dynamic states approach has far greater explanatory power than its precursor, and is compatible with leading edge research in entrepreneurship

Statistical mechanical approach to secondary processes and structural relaxation in glasses and glass formers

The interrelation of dynamic processes active on separated time-scales in glasses and viscous liquids is investigated using a model displaying two time-scale bifurcations both between fast and secondary relaxation and between secondary and structural relaxation. The study of the dynamics allows for predictions on the system relaxation above the temperature of dynamic arrest in the mean-field approximation, that are compared with the outcomes of the equations of motion directly derived within the Mode Coupling Theory (MCT) for under-cooled viscous liquids. Varying the external thermodynamic parameters a wide range of phenomenology can be represented, from a very clear separation of structural and secondary peak in the susceptibility loss to excess wing structures.Comment: 13 pages, 8 figure

Measurement of the Strong Coupling alpha s from Four-Jet Observables in e+e- Annihilation

Data from e+e- annihilation into hadrons at centre-of-mass energies between 91 GeV and 209 GeV collected with the OPAL detector at LEP, are used to study the four-jet rate as a function of the Durham algorithm resolution parameter ycut. The four-jet rate is compared to next-to-leading order calculations that include the resummation of large logarithms. The strong coupling measured from the four-jet rate is alphas(Mz0)= 0.1182+-0.0003(stat.)+-0.0015(exp.)+-0.0011(had.)+-0.0012(scale)+-0.0013(mass) in agreement with the world average. Next-to-leading order fits to the D-parameter and thrust minor event-shape observables are also performed for the first time. We find consistent results, but with significantly larger theoretical uncertainties.Comment: 25 pages, 15 figures, Submitted to Euro. Phys. J.