718 research outputs found
Multi-wavelength spectroscopic observation of EUV jet in AR 10960
We have studied the relationship between the velocity and temperature of a
solar EUV jet. The highly accelerated jet occurred in the active region NOAA
10960 on 2007 June 5. Multi-wavelength spectral observations with EIS/Hinode
allow us to investigate Doppler velocities at the wide temperature range. We
analyzed the three-dimensional angle of the jet from the stereoscopic analysis
with STEREO. Using this angle and Doppler velocity, we derived the true
velocity of the jet. As a result, we found that the cool jet observed with
\ion{He}{2} 256 \AA is accelerated to around which is over the upper limit of the chromospheric evaporation. The
velocities observed with the other lines are under the upper limit of the
chromospheric evaporation while most of the velocities of hot lines are higher
than that of cool lines. We interpret that the chromospheric evaporation and
magnetic acceleration occur simultaneously. A morphological interpretation of
this event based on the reconnection model is given by utilizing the
multi-instrumental observations.Comment: Accepted for publication in Ap
First ALMA Observation of a Solar Plasmoid Ejection from an X-ray Bright Point
Eruptive phenomena such as plasmoid ejections or jets are an important
feature of solar activity with the potential for improving our understanding of
the dynamics of the solar atmosphere. Such ejections are often thought to be
signatures of the outflows expected in regions of fast magnetic reconnection.
The 304 A EUV line of Helium, formed at around 10^5 K, is found to be a
reliable tracer of such phenomena, but the determination of physical parameters
from such observations is not straightforward. We have observed a plasmoid
ejection from an X-ray bright point simultaneously at millimeter wavelengths
with ALMA, at EUV wavelengths with AIA, in soft X-rays with Hinode/XRT. This
paper reports the physical parameters of the plasmoid obtained by combining the
radio, EUV and X-ray data. As a result, we conclude that the plasmoid can
consist either of (approximately) isothermal 10^5 K plasma that is optically
thin at 100 GHz, or else a 10^4 K core with a hot envelope. The analysis
demonstrates the value of the additional temperature and density constraints
that ALMA provides, and future science observations with ALMA will be able to
match the spatial resolution of space-borne and other high-resolution
telescopes.Comment: 10 page, 5 figures, accepted for publication in Astrophysical Journal
Letter. The movie can be seen at the following link:
http://hinode.nao.ac.jp/user/shimojo/data_area/plasmoid/movie5.mp
A First Comparison of Millimeter Continuum and Mg II Ultraviolet Line Emission from the Solar Chromosphere
We present joint observations of the Sun by the Atacama Large
Millimeter/submillimeter Array (ALMA) and the Interface Region Imaging
Spectrograph (IRIS). The observations were made of a solar active region on
2015 December 18 as part of the ALMA science verification effort. A map of the
Sun's continuum emission of size was obtained by ALMA at a
wavelength of 1.25 mm (239 GHz) using mosaicing techniques. A contemporaneous
map of size was obtained in the Mg II h doublet line at
2803.5\AA\ by IRIS. Both mm/submm continuum emission and ultraviolet
(UV) line emission are believed to originate from the solar chromosphere and
both have the potential to serve as powerful and complementary diagnostics of
physical conditions in this poorly understood layer of the solar atmosphere.
While a clear correlation between mm- brightness temperature and
the Mg II h line radiation temperature is observed the slope is ,
perhaps as a result of the fact that these diagnostics are sensitive to
different parts of the chromosphere and/or the Mg II h line source function
includes a scattering component. There is a significant offset between the mean
(1.25 mm) and mean (Mg II), the former being
greater than the latter. Partitioning the maps into "sunspot", "quiet regions",
and "plage regions" we find that the slope of the scatter plots between the
IRIS Mg II h line and the ALMA brightness temperature is 0.4
(sunspot), 0.56 (quiet regions), and 0.66 (plage regions). We suggest that this
change may be caused by the regional dependence of the formation heights of the
IRIS and ALMA diagnostics, and/or the increased degree of coupling between the
UV source function and the local gas temperature in the hotter, denser gas in
plage regions.Comment: 8 pages, 2 figure
Thermo-mechanic-electrical coupling in phospholipid monolayers near the critical point
Lipid monolayers have been shown to represent a powerful tool in studying
mechanical and thermodynamic properties of lipid membranes as well as their
interaction with proteins. Using Einstein's theory of fluctuations we here
demonstrate, that an experimentally derived linear relationship both between
transition entropy S and area A as well as between transition entropy and
charge q implies a linear relationships between compressibility \kappa_T, heat
capacity c_\pi, thermal expansion coefficient \alpha_T and electric capacity
CT. We demonstrate that these couplings have strong predictive power as they
allow calculating electrical and thermal properties from mechanical
measurements. The precision of the prediction increases as the critical point
TC is approached
Tactile Sensors Based on Conductive Polymers
This paper presents results from a selection of tactile sensors that have been designed and fabricated. These sensors are based on a common approach that consists in placing a sheet of piezoresistive material on the top of a set of electrodes. We use a thin film of conductive polymer as the piezoresistive mate¬rial. Specifically, a conductive water-based ink of this polymer is deposited by spin coating on a flexible plastic sheet, giving it a smooth, homogeneous and conducting thin film. The main interest in this procedure is that it is cheap and it allows the fabrication of flexible and low cost tactile sensors. In this work we present results from sensors made using two technologies. Firstly, we have used a flexible Printed Circuit Board (PCB) technology to fabricate the set of electrodes and addressing tracks. The result is a simple, flexible tactile sensor. In addition to these sensors on PCB, we have proposed, designed and fabricated sensors with screen printing technology. In this case, the set of electrodes and addressing tracks are made by printing an ink based on silver nanoparticles. The intense characterization provides us insights into the design of these tactile sensors.This work has been partially funded by the spanish government under contract TEC2006-12376-C02
Jets in coronal holes: Hinode observations and 3D computer modelling
Recent observations of coronal hole areas with the XRT and EIS instruments
onboard the Hinode satellite have shown with unprecedented detail the launching
of fast, hot jets away from the solar surface. In some cases these events
coincide with episodes of flux emergence from beneath the photosphere. In this
letter we show results of a 3D numerical experiment of flux emergence from the
solar interior into a coronal hole and compare them with simultaneous XRT and
EIS observations of a jet-launching event that accompanied the appearance of a
bipolar region in MDI magnetograms. The magnetic skeleton and topology that
result in the experiment bear a strong resemblance to linear force-fee
extrapolations of the SOHO/MDI magnetograms. A thin current sheet is formed at
the boundary of the emerging plasma. A jet is launched upward along the open
reconnected field lines with values of temperature, density and velocity in
agreement with the XRT and EIS observations. Below the jet, a split-vault
structure results with two chambers: a shrinking one containing the emerged
field loops and a growing one with loops produced by the reconnection. The
ongoing reconnection leads to a horizontal drift of the vault-and-jet
structure. The timescales, velocities, and other plasma properties in the
experiment are consistent with recent statistical studies of this type of
events made with Hinode data.Comment: 10 pages, 4 figures. Revised version submitted to ApJ Letter
Diacylglycerol kinase zeta inhibits G alpha q-induced atrial remodeling in transgenic mice
ArticleHEART RHYTHM. 6(1):78-84 (2009)journal articl
A three-dimensional study of reconnection, current sheets and jets resulting from magnetic flux emergence in the Sun
We present the results of a set of three-dimensional numerical simulations of
magnetic flux emergence from below the photosphere into the corona that include
a uniform and horizontal coronal magnetic field mimicking a pre-existing
large-scale coronal magnetic system. Cases with different relative orientations
of the upcoming and coronal fields are studied. Upon contact, a concentrated
current sheet with the shape of an arch or bridge is formed at the interface
which marks the positions of maximum jump in the field vector between the two
systems. Relative angles above 90 degrees yield abundant magnetic reconnection
and plasma heating. The reconnection is seen to be intrisincally
three-dimensional in nature, except at singular positions along the current
sheet. It drives collimated high-speed and high-temperature outflows only a
short distance from the reconnection site that propagate along the ambient
magnetic field lines as jets. Due to the low plasma density in the corona,
these jets may propagate over large distances and, therefore help distribute
high-density and high-temperature plasma along these newly reconnected field
lines. The experiments permit to discern and visualize the three-dimensional
shape and relative position of the upcoming plasma hill, high-speed jets and
subphotospheric flux system. As a result of the reconnection, magnetic field
lines from the magnetized plasma below the surface end up as coronal field
lines, thus causing a profound change in the connectivity of the magnetic
regions in the corona. The experiments presented here thus yield a number of
features repeatedly observed with the TRACE satellite and the YOHKOH-SXT
detector, like the establishment of connectivity between emergent and
pre-existing active regions, local heating and high-velocity outflows.Comment: 13 pages, 7 figures, inpress ApJ
Propagating transverse waves in soft X-ray coronal jets
Aims. The theoretical model for magnetohydrodynamic (MHD) modes guided by a field-aligned plasma cylinder with a steady flow is adapted to interpret transverse waves observed in solar coronal hot jets, discovered with Hinode/XRT in terms of fast magnetoacoustic kink modes.
Methods. Dispersion relations for linear magnetoacoustic perturbations of a plasma jet of constant cross-section surrounded by static magnetised plasma are used to determine the phase and group speeds of guided transverse waves and their relationship with the physical parameters of the jet and the background plasma. The structure of the perturbations in the macroscopic parameters of the plasma inside and outside the jet, and the phase relations between them are also established.
Results. We obtained a convenient expansion for the long wave-length limit of the phase and group speeds and have shown that transverse waves observed in soft-X-ray solar coronal jets are adequately described in terms of fast magnetoacoustic kink modes by a magnetic cylinder model, which includes the effect of a steady flow. In the observationally determined range of parameters, the waves
are not found to be subject to either the Kelvin-Helmholtz instability or the negative energy wave instability, and hence they are likely to be excited at the source of the jet
- …