501 research outputs found
Search for the hero: an investigation into the sports heroes of British sports fans
This is an initial study into British sports fans’ heroes. A questionnaire was sent to 95 students (average age ¼ 19.75) to identify their sporting hero, the hero’s sport and nationality and the reasons for this choice. Football was the most common source of sports heroes, identified by 49% of participants with a sporting hero. The majority (60%, N ¼ 48) of heroes chosen by participants were British, with David Beckham the most popular choice. Differences were observed between the gender of participants, gender of hero chosen and the reasons for choosing the hero. The most common reason for selecting a hero was a personal trait rather than skill, while in the questionnaire a category of Local Affiliation was added to those suggested by previous work. It was concluded that to become a hero athletes should combine skill with devotion to family, charity work and a place in popular culture
Unusual morphologies and the occurrence of pseudomorphs after ikaite (CaCO3•6H2O) in fast growing, hyperalkaline speleothem
Unusual speleothem, associated with hyperalkaline (pH>12) groundwaters have formed within a shallow, abandoned railway tunnel at Peak Dale, Derbyshire, UK. The hyperalkaline groundwaters are produced by the leaching of a thin layer (<2 m) of old lime kiln waste above the soil-bedrock surface above the tunnel by rainwater. This results in a different reaction and chemical process to that more commonly associated with the formation of calcium carbonate speleothems from Ca-HCO3-type groundwaters and degassing of CO2. Stalagmites within the Peak Dale tunnel have grown rapidly (averaging 33 mm y-1), following the closure of the tunnel 70 years ago. They have an unusual morphology comprising a central sub-horizontally-laminated column of micro- to nano-crystalline calcium carbonate encompassed by an outer sub-vertical assymetric ripple laminated layer. The stalagmites are largely composed of secondary calcite forming pseudomorphs (<1 mm) which we believe to be predominantly after the ‘cold climate’ calcium carbonate polymorph, ikaite (calcium carbonate hexahydrate: CaCO3•6H2O), with minor volumes of small (<5 μm) pseudomorphs after vaterite. The tunnel has a near constant temperature of 8-9°C which is slightly above the previously published crystallisation temperatures for ikaite (<6°C). Analysis of a stalagmite actively growing at the time of sampling, and preserved immediately within a dry nitrogen cryogenic vessel, indicates that following crystallisation of ikaite, decomposition to calcite occurs rapidly, if not instantaneously. We believe this is the first occurrence of this calcium carbonate polymorph observed within speleothem
Fly ash-derived MCM-41 as a low-cost silica support for polyethyleneimine in post-combustion CO2 capture
The mesoporous silicate molecular sieve, MCM-41, has been synthesized from pulverized coal fly ash (PFA), where the silicate filtrate used is a by-product from hydrothermal zeolite production. Rice husk ash was also used for comparison but fusion with sodium hydroxide was used to prepare the silicate filtrate, along similar lines to earlier reports of using PFA as a precursor for MCM-41 synthesis. The MCM-41 samples are chemically and mineralogically similar to a commercially available sample, but with higher pore volumes dominated by mesopores (0.92–1.13 cf. 0.88 cm3 g−1). After polyethyleneimine (PEI) impregnation for CO2 capture, the ash derived MCM-41 samples displayed higher uptakes than the commercial sample with the maximum achievable PEI loading of 60 Wt.% PEI (dry basis) before particle agglomeration occurs, approximately 13 compared to 11 Wt.%, respectively, the latter being comparable to earlier reports in the literature. The PFA sample that displays the fastest kinetics to achieve 90% of the equilibrium uptake had the largest mesopore volume of 1.13 cm3 g−1. Given the PFA-derived MCM-41 uses a waste silicate solution for hydrothermal preparation and no prior preparation is needed, production costs are estimated to be considerable lower where silicate solutions need to be prepared by base treatment, even if ash is used, as for the RHA derived MCM-41 used here
Exploring the utilisation of natural biosorbents for effective methylene blue removal
This paper presents a comprehensive analysis of the adsorbent capacity of five distinctly different biosorbents derived from untreated biomasses. The optimal adsorption capacity of seaweed (Laminaria digitata), horse chestnut husk, hazelnut husk, rapeseed residue, and whitewood to remove methylene blue (MB) dye was assessed by analysing the effects of particle size, pH, temperature, and initial dye concentrations. Furthermore, the adsorption kinetics, isotherms, and adsorption thermodynamics were investigated. The results showed that relatively high MB adsorption capacity was achieved by Laminaria digitata (~180 mg/g), in addition to a reasonable MB adsorption capacity of horse chestnut husk (~130 mg/g), hazelnut husk (~110 mg/g), and rapeseed residue (~80 mg/g). However, whitewood provides a relatively low adsorption capacity of below 20 mg/g. The best fit with experimental results regardless of biosorbent type was a pseudo-second-order kinetic model with the lowest mean absolute percentage error (ε, MAPE 0.99). Although the pseudo-second-order kinetic model is often associated with chemisorption, the low enthalpy values (<29.30 kJ/mol) typically suggest that the adsorption process is more characteristic of physisorption, which involves weaker van der Waals forces rather than the stronger covalent bonds of chemisorption. This proposed a multi-step adsorption process involving both physisorption and chemisorption. The adsorption isotherm of Langmuir showed superior fitting results for Laminaria digitata and hazelnut husk. In contrast, rapeseed residue and horse chestnut husk fit better with the Freundlich adsorption isotherm. The Langmuir adsorption isotherms showed a maximum adsorption capacity of ~500 mg/g for Laminaria digitata, followed by horse chestnut husk (~137 mg/g), hazelnut husk (~120 mg/g), and rapeseed residue (~85 mg/g). The Gibbs free energy was negative for Laminaria digitata < horse chestnut husk < hazelnut husk < 0, which suggests that the removal of MB is thermodynamically favourable, as the adsorption process occurs spontaneously. The results of the study indicate that MB dye removal using untreated biomasses has the potential to be a low-cost valorisation option in the holistic whole life cycle valorisation pathway for Laminaria digitata, horse chestnut husk, and hazelnut husk
Association between fish consumption, long chain omega 3 fatty acids, and risk of cerebrovascular disease: Systematic review and meta-analysis
Objective: To clarify associations of fish consumption and long chain omega 3 fatty acids with risk of cerebrovascular disease for primary and secondary prevention. Design: Systematic review and meta-analysis. Data sources: Studies published before September 2012 identified through electronic searches using Medline, Embase, BIOSIS, and Science Citation Index databases. Eligibility criteria: Prospective cohort studies and randomised controlled trials reporting on associations of fish consumption and long chain omega 3 fatty acids (based on dietary self report), omega 3 fatty acids biomarkers, or supplementations with cerebrovascular disease (defined as any fatal or non-fatal ischaemic stroke, haemorrhagic stroke, cerebrovascular accident, or transient ischaemic attack). Both primary and secondary prevention studies (comprising participants with or without cardiovascular disease at baseline) were eligible. Results: 26 prospective cohort studies and 12 randomised controlled trials with aggregate data on 794 000 non-overlapping people and 34 817 cerebrovascular outcomes were included. In cohort studies comparing categories of fish intake the pooled relative risk for cerebrovascular disease for 2-4 servings a week versus ≤1 servings a week was 0.94 (95% confidence intervals 0.90 to 0.98) and for ≥5 servings a week versus 1 serving a week was 0.88 (0.81 to 0.96). The relative risk for cerebrovascular disease comparing the top thirds of baseline long chain omega 3 fatty acids with the bottom thirds for circulating biomarkers was 1.04 (0.90 to 1.20) and for dietary exposures was 0.90 (0.80 to 1.01). In the randomised controlled trials the relative risk for cerebrovascular disease in the long chain omega 3 supplement compared with the control group in primary prevention trials was 0.98 (0.89 to 1.08) and in secondary prevention trials was 1.17 (0.99 to 1.38). For fish or omega 3 fatty acids the estimates for ischaemic and haemorrhagic cerebrovascular events were broadly similar. Evidence was lacking of heterogeneity and publication bias across studies or within subgroups. Conclusions Available observational data indicate moderate, inverse associations of fish consumption and long chain omega 3 fatty acids with cerebrovascular risk. Long chain omega 3 fatty acids measured as circulating biomarkers in observational studies or supplements in primary and secondary prevention trials were not associated with cerebrovascular disease. The beneficial effect of fish intake on cerebrovascular risk is likely to be mediated through the interplay of a wide range of nutrients abundant in fish
Evaluation of hydrochars from lignin hydrous pyrolysis to produce biocokes after carbonization
Hydrochars were obtained after hydrous pyrolysis of a pine Kraft lignin using different reaction conditions (temperature, water content and residence time) and the residues were characterized through a wide range of analytical techniques including high-temperature rheometry, solid-state 13C nuclear magnetic resonance (NMR), thermal gravimetric analysis (TGA), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and field emission scanning electron microscopy (FE-SEM). The results indicated that an increase in reaction temperature, an increase in residence time or a decrease in water content reduces the amount of fluid material in the residue. The hydrous pyrolysis conditions studied were not able to increase the maturation of lignin, which would result in an increase in the resolidification temperature, but reduced the amount of mineral matter in the hydrochar produced. On the other hand, the hydrochars obtained from pristine lignin, torrefied lignin (300 °C, 1 h) and their 50:50 wt.%/wt.% blend at temperatures of 350 °C after 6 h using 30 ml of water had lower ash contents (45%) is excessively high compared to that of the good coking coal (10%) and the micro-strength of the biocokes (R139%) and high microporous surface areas ( > 400 m2/g) of the biocokes and high alkalinity index of the lignins (>27%) compared to those of the coke (27% and 145 m2/g) and coal (0.6%), respectively. Furthermore, the biocoke derived from the hydrous pyrolysed torrefied lignin did not agglomerate, which could not be explained by changes in the chemical properties of the material and requires further investigation
Tomato: a crop species amenable to improvement by cellular and molecular methods
Tomato is a crop plant with a relatively small DNA content per haploid genome and a well developed genetics. Plant regeneration from explants and protoplasts is feasable which led to the development of efficient transformation procedures.
In view of the current data, the isolation of useful mutants at the cellular level probably will be of limited value in the genetic improvement of tomato. Protoplast fusion may lead to novel combinations of organelle and nuclear DNA (cybrids), whereas this technique also provides a means of introducing genetic information from alien species into tomato. Important developments have come from molecular approaches. Following the construction of an RFLP map, these RFLP markers can be used in tomato to tag quantitative traits bred in from related species. Both RFLP's and transposons are in the process of being used to clone desired genes for which no gene products are known. Cloned genes can be introduced and potentially improve specific properties of tomato especially those controlled by single genes. Recent results suggest that, in principle, phenotypic mutants can be created for cloned and characterized genes and will prove their value in further improving the cultivated tomato.
Origins of the Ambient Solar Wind: Implications for Space Weather
The Sun's outer atmosphere is heated to temperatures of millions of degrees,
and solar plasma flows out into interplanetary space at supersonic speeds. This
paper reviews our current understanding of these interrelated problems: coronal
heating and the acceleration of the ambient solar wind. We also discuss where
the community stands in its ability to forecast how variations in the solar
wind (i.e., fast and slow wind streams) impact the Earth. Although the last few
decades have seen significant progress in observations and modeling, we still
do not have a complete understanding of the relevant physical processes, nor do
we have a quantitatively precise census of which coronal structures contribute
to specific types of solar wind. Fast streams are known to be connected to the
central regions of large coronal holes. Slow streams, however, appear to come
from a wide range of sources, including streamers, pseudostreamers, coronal
loops, active regions, and coronal hole boundaries. Complicating our
understanding even more is the fact that processes such as turbulence,
stream-stream interactions, and Coulomb collisions can make it difficult to
unambiguously map a parcel measured at 1 AU back down to its coronal source. We
also review recent progress -- in theoretical modeling, observational data
analysis, and forecasting techniques that sit at the interface between data and
theory -- that gives us hope that the above problems are indeed solvable.Comment: Accepted for publication in Space Science Reviews. Special issue
connected with a 2016 ISSI workshop on "The Scientific Foundations of Space
Weather." 44 pages, 9 figure
A conceptual modeling methodology based on niches and granularity
This paper presents a methodology for conceptual modeling which is based on a new modeling primitive, the niche, and associated constructs granularity and reconciliation. A niche is an environment where entities interact for a specific purpose, playing specific roles, and according to the norms and constraints of that environment. Granularity refers to the relative level of power or influence of an entity within a niche. Reconciliation is a relationship from N entities onto one reconciled entity, and represents explicitly a situation where two or more different perspectives of the same entity have been reconciled, by negotiation, into a single consensus view. The methodology we propose provides a systematic method of designing conceptual models along with a process for normalising inappropriate relationships. Normalising is a prescriptive process for identifying and remedying inconsistencies within a model based on granularities. Drawing on a number of case studies, we show how niches and granularity make complexity easier to manage, highlight inaccuracies in a model, identify opportunities for achieving project goals, and reduce semantic heterogeneity
- …