6,611 research outputs found
Dynamical Ordering of Driven Stripe Phases in Quenched Disorder
We examine the dynamics and stripe formation in a system with competing short
and long range interactions in the presence of both an applied dc drive and
quenched disorder. Without disorder, the system forms stripes organized in a
labyrinth state. We find that, when the disorder strength exceeds a critical
value, an applied dc drive can induce a dynamical stripe ordering transition to
a state that is more ordered than the originating undriven, unpinned pattern.
We show that signatures in the structure factor and transport properties
correspond to this dynamical reordering transition, and we present the dynamic
phase diagram as a function of strengths of disorder and dc drive.Comment: 4 pages, 4 postscript figure
Calibration of <i>Herschel</i> SPIRE FTS observations at different spectral resolutions
The SPIRE Fourier Transform Spectrometer on-board the Herschel Space Observatory had two standard spectral resolution modes for science observations: high resolution (HR) and low resolution (LR), which could also be performed in sequence (H+LR). A comparison of the HR and LR resolution spectra taken in this sequential mode revealed a systematic discrepancy in the continuum level. Analysing the data at different stages during standard pipeline processing demonstrates that the telescope and instrument emission affect HR and H+LR observations in a systematically different way. The origin of this difference is found to lie in the variation of both the telescope and instrument response functions, while it is triggered by fast variation of the instrument temperatures. As it is not possible to trace the evolution of the response functions using housekeeping data from the instrument subsystems, the calibration cannot be corrected analytically. Therefore, an empirical correction for LR spectra has been developed, which removes the systematic noise introduced by the variation of the response functions
Collisional and thermal ionization of sodium Rydberg atoms I. Experiment for nS and nD atoms with n=8-20
Collisional and thermal ionization of sodium nS and nD Rydberg atoms with
n=8-20 has been studied. The experiments were performed using a two-step pulsed
laser excitation in an effusive atomic beam at atom density of about 2 10^{10}
cm^{-3}. Molecular and atomic ions from associative, Penning, and thermal
ionization processes were detected. It has been found that the atomic ions were
created mainly due to photoionization of Rydberg atoms by photons of blackbody
radiation at the ambient temperature of 300K. Blackbody ionization rates and
effective lifetimes of Rydberg states of interest were determined. The
molecular ions were found to be from associative ionization in Na(nL)+Na(3S)
collisions. Rate constants of associative ionization have been measured using
an original method based on relative measurements of Na_{2}^{+} and Na^{+} ion
signals.Comment: 23 pages, 10 figure
Expression of hemagglutinin protein from the avian influenza virus H5N1 in a baculovirus/insect cell system significantly enhanced by suspension culture
10.1186/1471-2180-6-16BMC Microbiology
Coherent Stranski-Krastanov growth in 1+1 dimensions with anharmonic interactions: An equilibrium study
The formation of coherently strained three-dimensional islands on top of the
wetting layer in Stranski-Krastanov mode of growth is considered in a model in
1+1 dimensions accounting for the anharmonicity and non-convexity of the real
interatomic forces. It is shown that coherent 3D islands can be expected to
form in compressed rather than in expanded overlayers beyond a critical lattice
misfit. In the latter case the classical Stranski-Krastanov growth is expected
to occur because the misfit dislocations can become energetically favored at
smaller island sizes. The thermodynamic reason for coherent 3D islanding is the
incomplete wetting owing to the weaker adhesion of the edge atoms. Monolayer
height islands with a critical size appear as necessary precursors of the 3D
islands. The latter explains the experimentally observed narrow size
distribution of the 3D islands. The 2D-3D transformation takes place by
consecutive rearrangements of mono- to bilayer, bi- to trilayer islands, etc.,
after exceeding the corresponding critical sizes. The rearrangements are
initiated by nucleation events each next one requiring to overcome a lower
energetic barrier. The model is in good qualitative agreement with available
experimental observations.Comment: 12 pages text, 15 figures, Accepted in Phys.Rev.B, Vol.61, No2
Systematic characterisation of the Herschel SPIRE Fourier Transform Spectrometer
A systematic programme of calibration observations was carried out to monitor
the performance of the SPIRE FTS instrument on board the Herschel Space
Observatory. Observations of planets (including the prime point-source
calibrator, Uranus), asteroids, line sources, dark sky, and cross-calibration
sources were made in order to monitor repeatability and sensitivity, and to
improve FTS calibration. We present a complete analysis of the full set of
calibration observations and use them to assess the performance of the FTS.
Particular care is taken to understand and separate out the effect of pointing
uncertainties, including the position of the internal beam steering mirror for
sparse observations in the early part of the mission. The repeatability of
spectral line centre positions is <5km/s, for lines with signal-to-noise ratios
>40, corresponding to <0.5-2.0% of a resolution element. For spectral line
flux, the repeatability is better than 6%, which improves to 1-2% for spectra
corrected for pointing offsets. The continuum repeatability is 4.4% for the SLW
band and 13.6% for the SSW band, which reduces to ~1% once the data have been
corrected for pointing offsets. Observations of dark sky were used to assess
the sensitivity and the systematic offset in the continuum, both of which were
found to be consistent across the FTS detector arrays. The average point-source
calibrated sensitivity for the centre detectors is 0.20 and 0.21 Jy [1 sigma; 1
hour], for SLW and SSW. The average continuum offset is 0.40 Jy for the SLW
band and 0.28 Jy for the SSW band.Comment: 41 pages, 37 figures, 32 tables. Accepted for publication in MNRA
Correcting the extended-source calibration for the <i>Herschel</i>-SPIRE Fourier-transform spectrometer
We describe an update to the Herschel-Spectral and Photometric Imaging Receiver (SPIRE) Fourier-transform spectrometer (FTS) calibration for extended sources, which incorporates a correction for the frequency-dependent far-field feedhorn efficiency, ηff. This significant correction affects all FTS extended-source calibrated spectra in sparse or mapping mode, regardless of the spectral resolution. Line fluxes and continuum levels are underestimated by factors of 1.3–2 in thespectrometer long wavelength band (447–1018 GHz; 671–294 μm) and 1.4–1.5 in the spectrometer short wavelength band (944–1568 GHz; 318–191 μm). The correction was implemented in the FTS pipeline version 14.1 and has also been described in the SPIRE Handbook since 2017 February. Studies based on extended-source calibrated spectra produced prior to this pipeline version should be critically reconsidered using the current products available in the Herschel Science Archive. Once the extended-source calibrated spectra are corrected for ηff, the synthetic photometry and the broad-band intensities from SPIRE photometer maps agree within 2–4 per cent – similar levels to the comparison of point-source calibrated spectra and photometry from point-source calibrated maps. The two calibration schemes for the FTS are now self-consistent: the conversion between the corrected extended-source and point-source calibrated spectra can be achieved with the beam solid angle and a gain correction that accounts for the diffraction loss
Calibration of the Herschel SPIRE Fourier Transform Spectrometer
The Herschel SPIRE instrument consists of an imaging photometric camera and
an imaging Fourier Transform Spectrometer (FTS), both operating over a
frequency range of 450-1550 GHz. In this paper, we briefly review the FTS
design, operation, and data reduction, and describe in detail the approach
taken to relative calibration (removal of instrument signatures) and absolute
calibration against standard astronomical sources. The calibration scheme
assumes a spatially extended source and uses the Herschel telescope as primary
calibrator. Conversion from extended to point-source calibration is carried out
using observations of the planet Uranus. The model of the telescope emission is
shown to be accurate to within 6% and repeatable to better than 0.06% and, by
comparison with models of Mars and Neptune, the Uranus model is shown to be
accurate to within 3%. Multiple observations of a number of point-like sources
show that the repeatability of the calibration is better than 1%, if the
effects of the satellite absolute pointing error (APE) are corrected. The
satellite APE leads to a decrement in the derived flux, which can be up to ~10%
(1 sigma) at the high-frequency end of the SPIRE range in the first part of the
mission, and ~4% after Herschel operational day 1011. The lower frequency range
of the SPIRE band is unaffected by this pointing error due to the larger beam
size. Overall, for well-pointed, point-like sources, the absolute flux
calibration is better than 6%, and for extended sources where mapping is
required it is better than 7%.Comment: 20 pages, 18 figures, accepted for publication in MNRA
Investigating the physical properties of transiting hot Jupiters with the 1.5-m Kuiper Telescope
We present new photometric data of 11 hot Jupiter transiting exoplanets
(CoRoT-12b, HAT-P-5b, HAT-P-12b, HAT-P-33b, HAT-P-37b, WASP-2b, WASP-24b,
WASP-60b, WASP-80b, WASP-103b, XO-3b) in order to update their planetary
parameters and to constrain information about their atmospheres. These
observations of CoRoT-12b, HAT-P-37b and WASP-60b are the first follow-up data
since their discovery. Additionally, the first near-UV transits of WASP-80b and
WASP-103b are presented. We compare the results of our analysis with previous
work to search for transit timing variations (TTVs) and a wavelength dependence
in the transit depth. TTVs may be evidence of a third body in the system and
variations in planetary radius with wavelength can help constrain the
properties of the exoplanet's atmosphere. For WASP-103b and XO-3b, we find a
possible variation in the transit depths that may be evidence of scattering in
their atmospheres. The B-band transit depth of HAT-P-37b is found to be smaller
than its near-IR transit depth and such a variation may indicate TiO/VO
absorption. These variations are detected from 2-4.6, so follow-up
observations are needed to confirm these results. Additionally, a flat spectrum
across optical wavelengths is found for 5 of the planets (HAT-P-5b, HAT-P-12b,
WASP-2b, WASP-24b, WASP-80b), suggestive that clouds may be present in their
atmospheres. We calculate a refined orbital period and ephemeris for all the
targets, which will help with future observations. No TTVs are seen in our
analysis with the exception of WASP-80b and follow-up observations are needed
to confirm this possible detection.Comment: 18 pages, 7 figures, 9 Tables. Light Curves available online.
Accepted to MNRAS (2017 August 25
- …