The Recognition of Fires Originating from Photovoltaic (PV) Solar Systems

There has been an observable increase in the fitting of photovoltaic (PV) solar panels on the roofs of buildings in the UK over the last decade. The origin of some fires in domestic and commercial properties has been attributed to PV systems. This thesis examines the ability of fire examiners to recognise and record details of fires believed to have originated from PV systems, as well as investigating the effect of internal heating in direct current (DC) isolators to the point at which they fail. National fire data was examined along with the methods for collecting and collating these data. This clarified that national fire data cannot identify the specifics of electrical fires. Validity of these data was then tested by identifying the confidence and competence in the recognition of the origin of fire, (especially when associated with PV systems), of some fire staff responsible for collecting fire data. This suggests that some fire scenes examiners are not confident in their own ability to recognise fires originating from PV systems. Evidence for fires occurring in PV systems in Kent between 2009 and 2014 was then examined, including a cold case forensic review of the evidence. This provided an indication that a potential common point of failure, which may lead to fire originating from a PV system, was to be found within the DC section of the PV circuits and probably within the DC isolator switch itself. Experimentation revealed that internal heating of a terminal connection can lead to changes of the phase of the insulating material, causing failure of structural integrity and therefore allowing an arc to be established. Observable post fire indicators associated with this mechanism of failure have been identified as well as hydrocarbons evolved from pyrolysis of isolator insulating material. Finally, areas for further experimental research and training of fire staff are suggested as well as the modification of recording mechanisms and building regulations

Acidified and ultrafiltered recovered coagulants from water treatment works sludge for removal of phosphorus from wastewater

This study used a range of treated water treatment works sludge options for the removal of phosphorus (P) from primary wastewater. These options included the application of ultrafiltration for recovery of the coagulant from the sludge. The treatment performance and whole life cost (WLC) of the various recovered coagulant (RC) configurations have been considered in relation to fresh ferric sulphate (FFS). Pre-treatment of the sludge with acid followed by removal of organic and particulate contaminants using a 2kD ultrafiltration membrane resulted in a reusable coagulant that closely matched the performance FFS. Unacidified RC showed 53% of the phosphorus removal efficiency of FFS, at a dose of 20 mg/L as Fe and a contact time of 90 min. A longer contact time of 8 h improved performance to 85% of FFS. P removal at the shorter contact time improved to 88% relative to FFS by pre-acidifying the sludge to pH 2, using an acid molar ratio of 5.2:1 mol H+:Fe. Analysis of the removal of P showed that rapid phosphate precipitation accounted for >65% of removal with FFS. However, for the acidified RC a slower adsorption mechanism dominated; this was accelerated at a lower pH. A cost-benefit analysis showed that relative to dosing FFS and disposing waterworks sludge to land, the 20 year WLC was halved by transporting acidified or unacidified sludge up to 80 km for reuse in wastewater treatment. A maximum inter-site distance was determined to be 240 km above the current disposal route at current prices. Further savings could be made if longer contact times were available to allow greater P removal with unacidified RC

Reuse of recovered coagulants in water treatment: An investigation on the effect coagulant purity has on treatment performance

Coagulant recovery offers many potential benefits to water treatment, by reducing chemical demand and waste production. The key obstacle to successful implementation is achieving the same levels of treatment quality and process economics as commercial coagulants. This study has evaluated the selectivity of pressure-filtration in the role of a low-cost coagulant recovery technology from waterworks sludge. The treatment performance of the purified recovered coagulant was directly compared to fresh and raw recovered coagulants. DOC and turbidity removal by recovered coagulants was close to that of commercial coagulants, indicating that coagulant can be successfully recovered and regenerated by acidifying waterworks sludge. However, performance was less consistent, with a much narrower optimum charge neutralisation window and 10–30% worse removal performance under optimum conditions. This inferior performance was particularly evident for recovered ferric coagulants. The impact of this was confirmed by measuring THM formation potential and residual metals concentrations, showing 30–300% higher THMFPs when recovered coagulants were used. This study confirms that pressure-filtration can be operated on an economically viable basis, in terms of mass flux and fouling. However, the selectivity currently falls short of the purity required for potable treatment, due to incomplete rejection of sludge contaminants

Coagulant recovery and reuse for drinking water treatment

Coagulant recovery and reuse from waterworks sludge has the potential to significantly reduce waste disposal and chemicals usage for water treatment. Drinking water regulations demand purification of recovered coagulant before they can be safely reused, due to the risk of disinfection by-product precursors being recovered from waterworks sludge alongside coagulant metals. While several full-scale separation technologies have proven effective for coagulant purification, none have matched virgin coagulant treatment performance. This study examines the individual and successive separation performance of several novel and existing ferric coagulant recovery purification technologies to attain virgin coagulant purity levels. The new suggested approach of alkali extraction of dissolved organic compounds (DOC) from waterworks sludge prior to acidic solubilisation of ferric coagulants provided the same 14:1 selectivity ratio (874 mg/L Fe vs. 61 mg/L DOC) to the more established size separation using ultrafiltration (1285 mg/L Fe vs. 91 mg/L DOC). Cation exchange Donnan membranes were also examined: while highly selective (2555 mg/L Fe vs. 29 mg/L DOC, 88:1 selectivity), the low pH of the recovered ferric solution impaired subsequent treatment performance. The application of powdered activated carbon (PAC) to ultrafiltration or alkali pre-treated sludge, dosed at 80 mg/mg DOC, reduced recovered ferric DOC contamination to <1 mg/L but in practice, this option would incur significant costs. The treatment performance of the purified recovered coagulants was compared to that of virgin reagent with reference to key water quality parameters. Several PAC-polished recovered coagulants provided the same or improved DOC and turbidity removal as virgin coagulant, as well as demonstrating the potential to reduce disinfection byproducts and regulated metals to levels comparable to that attained from virgin material

Signs and wonders: Exploring the effects and impact of the Investors in People logo and symbols

This article is (c) Emerald Group Publishing and permission has been granted for this version to appear herehttp://www.emeraldinsight.com/doi/full/10.1108/EJTD-11-2014-0074 . Emerald does not grant permission for this article to be further copied/distributed or hosted elsewhere without the express permission from Emerald Group Publishing LimitedPurpose – This paper aims to examine and assess the reputational impact of the logo and symbols of the UK Standard Investors in People (IiP). The extant literature highlights differing opinions in terms of the likely benefits that IiP generates following achievement of the Standard. This paper focuses specifically on the perceptions of reputational claims made regarding existing employees, potential employees and customers. Design/methodology/approach – The debate is explored through 38 interviews using the perceptions of managers and frontline employees within six IiP-accredited firms and one non-accredited firm. Findings – The study indicates that the logo and symbols of the Standard have minimal meaning and significance for the interviewees and their outlook on potential employees and customers. There were some indications, however, that the wider reputational implications of carrying the logo may have some potentially beneficial effects. Originality/value – The paper concludes that the overarching findings present a potentially serious issue for IiP, and that there is a need to understand further the impact and value of the logo and symbols

‘Smart Cities’ – Dynamic Sustainability Issues and Challenges for ‘Old World’ Economies: A Case from the United Kingdom

The rapid and dynamic rate of urbanization, particularly in emerging world economies, has resulted in a need to find sustainable ways of dealing with the excessive strains and pressures that come to bear on existing infrastructures and relationships. Increasingly during the twenty-first century policy makers have turned to technological solutions to deal with this challenge and the dynamics inherent within it. This move towards the utilization of technology to underpin infrastructure has led to the emergence of the term ‘Smart City’. Smart cities incorporate technology based solutions in their planning development and operation. This paper explores the organizational issues and challenges facing a post-industrial agglomeration in the North West of England as it attempted to become a ‘Smart City’. In particular the paper identifies and discusses the factors that posed significant challenges for the dynamic relationships residents, policymakers and public and private sector organizations and as a result aims to use these micro-level issues to inform the macro-debate and context of wider Smart City discussions. In order to achieve this, the paper develops a range of recommendations that are designed to inform Smart City design, planning and implementation strategies

Ku80 Counters Oxidative Stress-Induced DNA Damage and Cataract Formation in the Human Lens

PURPOSE: Oxidative stress in the human lens leads to a wide range of damage including DNA strand breaks, which are likely to contribute to cataract formation. The protein Ku80 is a fundamental component of the nonhomologous end-joining pathway that repairs DNA double strand breaks. This study investigates the putative impact of Ku80 in cataract prevention in the human lens. METHODS: The present study used the human lens epithelial cell line FHL124 and whole human lens organ culture. Targeted siRNA was used to deplete Ku80, with Western blot and immunocytochemistry employed to assess Ku80 expression levels. Oxidative stress was induced with hydrogen peroxide and DNA strand breaks measured by alkaline comet assay and γH2AX foci counts. Visual quality of whole human lenses was measured with image analysis software. RESULTS: Expression of Ku80 was predominately found in the cell nucleus of both FHL124 cells and native human lens epithelium. Treatment of FHL124 cells and whole lens cultures with siRNA targeted against Ku80 resulted in a significant knockdown at the protein level. Application of oxidative stress (30 μM H2O2) created more DNA strand breaks when added to Ku80 knockdown cells than in scrambled siRNA control cells as determined by the alkaline comet assay and the number of γH2AX foci. In whole lens cultures, exposure to 1 mM H2O2 resulted in more lens opacity in Ku80 knockdown lenses than match-paired controls. CONCLUSIONS: Depletion of Ku80 in the lens through acute change or a consequence of aging is likely to increase levels of DNA strand breaks, which could negatively influence physiological function and promote lens opacity. It is therefore feasible that Ku80 plays a role in retarding cataract formation

Rapid and simple comparison of messenger RNA levels using real-time PCR

Real-time polymerase chain reaction (PCR) constitutes a significant improvement over traditional end-point PCR, as it allows the quantification of starting amounts of nucleic acid templates, in real-time. However, quantification requires validation through numerous internal controls and standard curves. We describe in this paper a simple protocol which uses real-time PCR to compare mRNA levels of a gene of interest between different experimental conditions. Comparative real-time PCR can be a relatively low-cost method and does not require sequence-specific fluorescent reporters. Moreover, several genes from a set of experiments can be assessed in a single run. Thus, in addition to providing a comparative profile for the expression of a gene of interest, this method can also provide information regarding the relative abundance of different mRNA species

Trait compensation in marine gastropods: shell shape, avoidance behavior, and susceptibility to predation

Many organisms have evolved morphological and behavioral traits that reduce their susceptibility to predation. However, few studies have explicitly investigated the relationships between defensive traits and susceptibility. Here we demonstrate a negative correlation between morphological defenses and behavioral avoidance across several species of marine gastropod that is linked to vulnerability to crab predation. Snails that had relatively taller shell spires (high aspect ratio) showed greater responsiveness when exposed to predation cues than did species with disc-like shells (low aspect ratio). Our results suggest that the snail species most vulnerable to predation compensated by showing the highest levels of behavioral avoidance, and hence may be at a disadvantage in competition with less vulnerable species. This has important implications because the behavioral response of herbivorous gastropods to predation cues may play a central role in structuring rocky intertidal communities through trait-mediated indirect effects