Minimum Particle Size for Cyclone Dust Separator

Perkins technology wish to separate small soot particles from exhaust gases, and the question posed to the study group was to determine the feasibility of using a cyclone separator to remove these particles. Soot is mostly composed of polycyclicaromatic compounds and results from the incomplete combustion of the diesel fuel in the engine. The average size of the particles formed in the engine is in the range 3 to 10 nm in diameter, but this is known to increase within the exhaust system. In the first part of this report we determine the minimum particle size that can be removed by centrifugal separation. The second part discusses the mechanisms for particle growth within the exhaust system in order to estimate the particle growth rate. In section two we estimate the minimum particle diameter that can be removed by a cyclone separator is around one micron. This estimate is consistent with current applications of hydrocyclones. The particle size measurements by Perkins Technology together with our estimates from section three, suggest that the soot particles are an order of magnitude smaller than this. Although it may be possible to remove some particles less than one micron in diameter with a well designed high-speed cyclone, we do not think it will be possible to remove a substantial proportion of 100 nm or smaller particles. The growth rate of the particles increases if the particles volume fraction or the polydispersity is increased. Therefore aggregation could be enhanced by the addition of larger particles (d > 1 µm) or water droplets (provided the water does not all vapourise) to the exhaust gas

Frictional Resistance to a Ship's Passage through Converging Ice

Presents formulae to estimate the pressure developed in a converging ice field and to calculate the resulting frictional resistance to a ship attempting to navigate through such ice. The icebreaker-tanker Manhattan is used as an example. It is shown that the power necessary to navigate in ice which is failing in compression would be prohibitive

Rapid metabolic pathway assembly and modification using serine integrase site-specific recombination

Synthetic biology requires effective methods to assemble DNA parts into devices and to modify these devices once made. Here we demonstrate a convenient rapid procedure for DNA fragment assembly using site-specific recombination by ϕC31 integrase. Using six orthogonal attP/attB recombination site pairs with different overlap sequences, we can assemble up to five DNA fragments in a defined order and insert them into a plasmid vector in a single recombination reaction. ϕC31 integrase-mediated assembly is highly efficient, allowing production of large libraries suitable for combinatorial gene assembly strategies. The resultant assemblies contain arrays of DNA cassettes separated by recombination sites, which can be used to manipulate the assembly by further recombination. We illustrate the utility of these procedures to (i) assemble functional metabolic pathways containing three, four or five genes; (ii) optimize productivity of two model metabolic pathways by combinatorial assembly with randomization of gene order or ribosome binding site strength; and (iii) modify an assembled metabolic pathway by gene replacement or addition

Magmatic Cu-Ni-PGE-Au sulfide mineralisation in alkaline igneous systems: An example from the Sron Garbh intrusion, Tyndrum, Scotland

Magmatic sulfide deposits typically occur in ultramafic-mafic systems, however, mineralisation can occur in more intermediate and alkaline magmas. Sron Garbh is an appinite-diorite intrusion emplaced into Dalradian metasediments in the Tyndrum area of Scotland that hosts magmatic Cu-Ni-PGE-Au sulfide mineralisation in the appinitic portion. It is thus an example of magmatic sulfide mineralisation hosted by alkaline rocks, and is the most significantly mineralised appinitic intrusion known in the British Isles. The intrusion is irregularly shaped, with an appinite rim, comprising amphibole cumulates classed as vogesites. The central portion of the intrusion is comprised of unmineralised, but pyrite-bearing, diorites. Both appinites and diorites have similar trace element geochemistry that suggests the diorite is a more fractionated differentiate of the appinite from a common source that can be classed with the high Ba-Sr intrusions of the Scottish Caledonides. Mineralisation is present as a disseminated, primary chalcopyrite-pyrite-PGM assemblage and a blebby, pyrite-chalcopyrite assemblage with significant Co-As-rich pyrite. Both assemblages contain minor millerite and Ni-Co-As-sulfides. The mineralisation is Cu-, PPGE-, and Au-rich and IPGE-poor and the platinum group mineral assemblage is overwhelmingly dominated by Pd minerals; however, the bulk rock Pt/Pd ratio is around 0.8. Laser ablation analysis of the sulfides reveals that pyrite and the Ni-Co-sulfides are the primary host for Pt, which is present in solid solution in concentrations of up to 22 ppm in pyrite. Good correlations between all base and precious metals indicate very little hydrothermal remobilisation of metals despite some evidence of secondary pyrite and PGM. Sulfur isotope data indicate some crustal S in the magmatic sulfide assemblages. The source of this is unlikely to have been the local quartzites, but S-rich Dalradian sediments present at depth. The generation of magmatic Cu-Ni-PGE-Au mineralisation at Sron Garbh can be attributed to post-collisional slab drop off that allowed hydrous, low-degree partial melting to take place that produced a Cu-PPGE-Au-enriched melt, which ascended through the crust, assimilating crustal S from the Dalradian sediments. The presence of a number of PGE-enriched sulfide occurrences in appinitic intrusions across the Scottish Caledonides indicates that the region contains certain features that make it more prospective than other alkaline provinces worldwide, which may be linked the post-Caledonian slab drop off event. We propose that the incongruent melting of pre-existing magmatic sulfides or ‘refertilised’ mantle in low-degree partial melts can produce characteristically fractionated, Cu-PPGE-Au-semi metal bearing, hydrous, alkali melts, which, if they undergo sulfide saturation, have the potential to produce alkaline-hosted magmatic sulfide deposits

BioAcoustica : a free and open repository and analysis platform for bioacoustics

We describe an online open repository and analysis platform, BioAcoustica (http://bio. acousti.ca), for recordings of wildlife sounds. Recordings can be annotated using a crowdsourced approach, allowing voice introductions and sections with extraneous noise to be removed from analyses. This system is based on the Scratchpads virtual research environment, the BioVeL portal and the Taverna workflow management tool, which allows for analysis of recordings using a grid computing service. At present the analyses include spectrograms, oscillograms and dominant frequency analysis. Further analyses can be integrated to meet the needs of specific researchers or projects. Researchers can upload and annotate their recordings to supplement traditional publication

The Cryogenic Target for the G0^0 Experiment at Jefferson Lab

A cryogenic horizontal single loop target has been designed, built, tested and operated for the G$^0$ experiment in Hall C at Jefferson Lab. The target cell is 20 cm long, the loop volume is 6.5 l and the target operates with the cryogenic pump fully immersed in the fluid. The target has been designed to operate at 30 Hz rotational pump speed with either liquid hydrogen or liquid deuterium. The high power heat exchanger is able to remove 1000 W of heat from the liquid hydrogen, while the nominal electron beam with current of 40 $\mu$A and energy of 3 GeV deposits about 320 W of heat into the liquid. The increase in the systematic uncertainty due to the liquid hydrogen target is negligible on the scale of a parity violation experiment. The global normalized yield reduction for 40 $\mu$A beam is about 1.5 % and the target density fluctuations contribute less than 238 ppm (parts per million) to the total asymmetry width, typically about 1200 ppm, in a Q$^2$ bin.Comment: 27 pages, 14 figure

Who learns from whom? Supporting users and developers of a major biodiversity e-infrastructure

Abstract. Support systems play an important role for the communication between users and developers of software. We studied two support systems, an issues tracker and an email service available for Scratchpads, a Web 2.0 social networking tool that enables communities to build, share, manage and publish biodiversity information on the Web. Our aim was to identify co-learning opportunities between users and developers of the Scratchpad system by asking which support system was used by whom and for what type of questions. Our results show that issues tracker and emails cater to different user mentalities as well as different kind of questions and suggest ways to improve the support system as part of the development under the EU funded ViBRANT programme

Large droplet impact on water layers

The impact of large droplets onto an otherwise undisturbed layer of water is considered. The work, which is motivated primarily with regard to aircraft icing, is to try and help understand the role of splashing on the formation of ice on a wing, in particular for large droplets where splash appears, to have a significant effect. Analytical and numerical approaches are used to investigate a single droplet impact onto a water layer. The flow for small times after impact is determined analytically, for both direct and oblique impacts. The impact is also examined numerically using the volume of fluid (VOF) method. At small times there are promising comparisons between the numerical results, the analytical solution and experimental work capturing the ejector sheet. At larger times there is qualitative agreement with experiments and related simulations. Various cases are considered, varying the droplet size to layer depth ratio, including surface roughness, droplet distortion and air effects. The amount of fluid splashed by such an impact is examined and is found to increase with droplet size and to be significantly influenced by surface roughness. The makeup of the splash is also considered, tracking the incoming fluid, and the splash is found to consist mostly of fluid originating in the layer

Effects of Testicular and Ovarian Inhibin‐Like Activity, Using In Vitro and In Vivo Systems

Inhibin‐like activities in charcoal‐treated bovine follicular fluid (FF) and medium from cultured Sertoli cells (SCCM) were assayed in an in vitro bioassay system, using cultured pituitary cells. Addition of both fluids resulted in parallel dose‐dependent decreases of the concentration of follicle‐stimulating hormone (FSH) in the medium, both in the presence or absence of luteinizing hormone‐releasing hormone (LH‐RH). A single injection of FF into immature and adult male and female rats resulted in decreased peripheral levels of FSH, but not of LH, after 4 or 8 h. This decrease was larger and occurred faster in adult female rats than in prepubertal female animals. Injection of FF into adult female rats, immediately after unilateral ovariectomy (ULO) prevented the specific increase of FSH levels, occurring in control animals. This suppression could not be obtained after treatment with steroids. Daily treatment of adult female or immature male rats for periods longer than 5 days did not result in prolonged suppression of circulating FSH concentrations; LH levels were significantly increased. The female animals showed cyclic vaginal smear changes and normal ovulation; in the male rats testis weight and numbers of spermatogenic cells were reduced. It is concluded that testicular and ovarian inhibin‐like activities have similar properties. Injections of FF into male and female rats cause similar effects on FSH and LH. The effect of FF in ULO‐animals suggests that inhibin could play a role in the short‐term regulation of the number of developing follicles in the ovary. Injection of FF into male rats causes a probably transient impairment of spermatogenesis through an initial suppression of FSH. Copyrigh